Labex DAMAS affiliated or acknowledged peer reviewed publications


2015:

  1. (WP1-T3) S. Biswas, S.S. Dhinwal, B. Beausir, L.S. Toth, S. Suwas, Thermal Response on the Microstructure and Texture of ECAE and Cold Rolled Pure Magnesium, METTRANS A, Accepted, Jan. 10, 2015.
  2. (WP1-T4) K. Akoussan, H. Boudaoud, E-M. Daya; E. Carrera, Vibration Modeling of Multilayer Composite Structures with Viscoelastic Layers, Mechanics of Advanced Materials And Structures, 22 (2015) 136-149.
  3. (WP1-T4) K. Lougou, H. Boudaoud, E.M. Daya and L. Azrar. Vibration modeling of large repetitive sandwich structures with viscoelastic core, Mechanics of Advanced Materials and Structures, (2015), accepted Oct 2014.
  4. (WP1-T4) M. Hamdaoui, G. Robin, M. Jrad, E.M. Daya. Optimal design of frequency dependent three-layered rectangular composite beams for low mass and high damping. Composite Structures, Composite Structures, 120, (2015) 174-182.
  5. (WP1-T5) A2 L. Ropars, M. Dehmas, S. Gourdet, J. Delfosse D. Tricker, E. Aeby-Gautier, Structure evolutions in a Ti-6Al-4V matrix composite reinforced with TiB, characterised using high energy X-ray diffraction, Journal of Alloys and Compounds, 624 (2015) 179-188.
  6. (WP2-T3) H. Yan, Y. Zhang, N. Xu, A. Senyshyn, H.-G. Brokmeier, C. Esling, X. Zhao, L. Zuo, Crystal structure determination of incommensurate modulated martensite in Ni-Mn-In Heusler alloys, Acta Materialia, In print, January 2015
  7. (WP2-T3) B. Yang, Y. Zhang, Z.B. Li, G. Qin, C. Esling, X. Zhao, L. Zuo,Crystallographic orientation of modulated martensite in epitaxially grown Ni–Mn–Ga thin film, Thin Solid Films, Available online 3 December 2014 doi:10.1016/j.tsf.2014.11.073
  8. (WP4-T3) S. Wang, Y. Zhang, C. Schuman, J.-S. Lecomte, X. Zhao, L. Zuo, M.-J. Philippe, C. Esling, Study of twinning/detwinning behaviors of Ti by interrupted in situ tensile tests, Acta Materialia, 82, (2015) 424-436, Available online 1 January 2015 doi:10.1016/j.actamat.2014.09.038
  9. (WP4-T3) G. S. Duan, B. L. Wu, X. H. Du, G.Zhao,Y. D. Zhang, X. Zhao, L.Zuo, C. Esling, The microstructure evolution in AZ31B alloy during multi-pass cold rolling to a high reduction, Materials Science and Engineering A, 620 (2015) 120-128.
  10. (WP4-T3) X. H. Du, M. Hong, G. S. Duan, C. B. Wei, E. P. Jiang, M. Zhang, B. L. Wu, Y. D. Zhang, C. Esling, Excellent cold rollability in a single pass of an Mg-4Er (wt.%) alloy, International Journal of Materials Research, already posted online on 1 Oct 2014. doi: 10.3139/146.111143.
  11. (WP4-T3) X. H. Du, M. Hong, G. S. Duan, B. L. Wu, Y. D. Zhang, C. Esling, Chinese Science Bulletin, Preparation of sound ribbons with submicrometer-grained microstructure on a Mg–Zn alloy, Accepted 10 October 2014, online doi: 10.1007/s11434-014-0689-4.
  12. (WP4-T1) N. Pardis, C. Chen, L.S. Toth, C.F. Gu, B. Beausir, L. Kommel, Microstructure, texture and mechanical properties of cyclic expansion-extrusion deformed pure copper, Mat. Sci. Eng. A, accepted, 05/01/2015.
  13. (WP4-T3) M. Abobaker, O. Bouaziz, M. Lebyodkin, T. Lebedkina, I.V. Shashkov, Avalanche dynamics in crumpled aluminum thin foils. Scripta Mater., 99 (2015) 17-20.
  14. (WP4-T4) K. Yu, H. Hu, H. Tang, G. Giunta, M. Potier-Ferry, S. Belouettar, A novel two-dimensional finite element to study the instability phenomena of sandwich plates, Computer Methods In Applied Mechanics And Engineering, 283 (2015) 1117-1137.
  15. (WP4-T4) J. Yang, Q. Huang, H. Hu, G. Giunta, S. Belouettar, M. Potier-Ferry, A new family of finite elements for wrinkling analysis of thin films on compliant substrates, Composite Structures, 119 (2015) 568–577. Available online doi:10.1016/j.compstruct.2014.09.040
  16. (WP4-T4) F. Mohri , N. Damil , M. Potier-Ferry: Review and comparison of finite element flexural–torsional models for non-linear behaviour of thin-walled beams, Advances in Engineering Software, 80 (2015) 174–187.
  17. (WP4-T4) M. Ben Bettaieb, F. Abed-Meraim, Investigation of localized necking in substrate-supported metal layers: Comparison of bifurcation and imperfection analyses, International Journal of Plasticity, 65 (2015) 168-190.
  18. (WP5-T4) T. Richeton, I. Tiba, S. Berbenni, O. Bouaziz, Analytical expressions of incompatibility stresses at Sigma3 <111> twin boundaries and consequences on single slip promotion parallel to twin plane, Philosophical Magazine, 95 (2015) 12-31.
  19. (WP5-T4) Z.-Z. Shi, Y. Zhang, F. Wagner, P.-A. Juan, S. Berbenni, L. Capolungo, J.-S. Lecomte, T. Richeton, On the selection of extension twin variants with low Schmid factors in a deformed Mg alloy, Acta Materialia, 83 (2015) 17-28.
  20. (WP5-T4) C. Mareau, S. Berbenni, An affine formulation for the self-consistent modeling of elasto-viscoplastic heterogeneous materials based on the translated field method. International Journal of Plasticity, 64 (2015) 134-150.

2014:

  1. (WP1-T1) V.A. Esin, Y. Souhar, Solvent grain boundary diffusion in binary solid solutions: a new approach to evaluate solute grain boundary segregation, Philosophical Magazine, 94 (2014) 4066-4079.
  2. 20. (WP1-T3) J. Martin, P. Leone, A. Nominé, D. Veys-Renaux, G. Henrion, T. Belmonte Influence of electrolyte ageing on the Plasma Electrolytic Oxidation of aluminium, Surf. Coat. Technol., in press, doi:10.1016/j.surfcoat.2014.11.001 (2014).
  3. (WP1-T5) J.X. Zou, C.F. Pérez-Brokate, R. Arruffat, B. Bolle, J.J. Fundenberger, X.Q. Zeng, T. Grosdidier, W.J. Ding, Nanostructured bulk Mg + MgO composite synthesized through arc plasma evaporation and high pressure torsion for H-storage application, Mater. Sci. Eng., B183 (2014) 1–5.
  4. (WP2-T2) H. Mansour, J. Guyon, M.A. Crimp, N. Gey, B. Beausir, N. Maloufi, Accurate electron channeling contrast analysis of dislocations in fine grained bulk materials, Scripta Mater, 89 (2014) 77-78.
  5. (WP2-T2) C. Buirette, J. Huez, N. Gey, A. Vassel, E. Andrieu, Study of crack propagation mechanisms during Charpy impact toughness tests on both equiaxed and lamellar microstructures of Ti-6Al-4V titanium alloy, Materials Science and Engineering A, 618 (2014) 546-557.
  6. (WP2-T2) A. Chbihi, D. Barbier, L. Germain, A. Hazotte, M. Goune, Interactions between ferrite recrystallization and austenite formation in high-strength steels, J. Mater. Sci., 49 (2014) 3608-3621.
  7. (WP2-T2) F.Z. Bedia, A. Bedia, N. Maloufi, M. Aillerie, F. Genty, B. Benyoucef, Effect of tin doping on optical properties of nanostructured ZnO thin films grown by spray pyrolysis technique, Journal of Alloys and Compounds, 616 (2014) 312-318.
  8. (WP2-T2) V.A. Esin, B. Denand, Q. Le Bihan, M. Dehmas, J. Teixeira, G. Geandier, S. Denis, T. Sourmail, E. Aeby-Gautier, In situ synchrotron X-ray diffraction and dilatometric study of austenite formation in a multi-component steel: Influence of initial microstructure and heating rate, Acta Materialia, 80 (2014) 118-131.
  9. (WP2-T2) J. Ruiz-Vargas, N. Siredey-Schwaller, P. Noyrez, S. Mathieu, P. Bocher, N. Gey, Potential and limitations of microanalysis SEM techniques to characterize borides in brazed Ni-based superalloys, Materials Characterization, 94 (2014) 46-57.
  10. (WP2-T2) G. Singh, S-M. Hong, K. Oh-ishi, K. Hono, E. Fleury, U. Ramamurty, Enhancing the high temperature plasticity of a Cu-containing austenitic stainless steel through grain boundary strengthening, Materials Science and Engineering A, 602 (2014) 77-88.
  11. (WP2-T2) L. Vautrot, G. Geandier, M. Mourot, M. Dehmas, E. Aeby-Gautier, B. Denand, S. Denis, Internal stresses in Metal Matrix Composites in relation with matrix phase transformations, Advanced Materials Research, 996 (2014) 944-950.
  12. (WP2-T2) G. Geandier, L. Vautrot, M. Salib, M. Mourot, M. Dehmas, B. Denand, E. Aeby-Gautier, S. Denis, Microstructural evolution and strain development in Metal Matrix Composites, Advanced Materials Research, 996 (2014) 936-943.
  13. (WP2-T3) L. Li, Z. Li, Y. Zhang, C. Esling, H. Liu, Z. Zhao, Q. Zhu, Y. Zuo, J. Cui, Crystallographic effect of a high magnetic field on a solidified hypoeutectic Zn-Al alloy, J. Appl. Cryst., 47 (2014) 606-612.
  14. (WP2-T3) T.P. Hou, Y. Li, Y.D. Zhang, K.M. Wu, Magnetic Field-Induced Precipitation Behaviors of Alloy Carbides M2C, M3C, and M6C in a Molybdenum-Containing Steel, Metall. Mater. Trans. A, 45A (2014) 2553-2561.
  15. (WP2-T3) Z. Li, Bo. Yang, Y. Zhang, C. Esling, N. Zou, X. Zhao, L. Zuo, Liang, Crystallographic insights into the intermartensitic transformation in Ni-Mn-Ga alloys, Acta Materialia, 74 (2014) 9-17.
  16. (WP2-T3) Z. Li, Y. Zhang, C. Esling, W. Gan, N. Zou, X. Zhao, L. Zuo, In-situ neutron diffraction study of martensitic variant redistribution in polycrystalline Ni-Mn-Ga alloy under cyclic thermo-mechanical treatment, Applied Physics Letters, 105 (2014) 021907.
  17. (WP2-T4) Z.B. Li, Y.D. Zhang, C. F. Sanchez-Valdes, J.L.S Sanchez Llamazares, C. Esling, X. Zhao, L. Zuo, Giant magnetocaloric effect in melt-spun Ni-Mn-Ga ribbons with magneto-multistructural transformation, Applied Physics Letters, 104 (2014) Article Number: 044101.
  18. (WP2-T4) L.S. Toth, C.F. Gu, Ultrafine-grain metals by severe plastic deformation, A tutorial review, Materials Characterization, http://dx.doi.org/10.1016/j.matchar.2014.02.003.
  19. (WP2-T4) Nima Pardis, Cai Chen, Mehrdad Shahbaz, Ramin Ebrahimi, Laszlo S. Toth, Development of new routes of severe plastic deformation through cyclic expansion-extrusion process, Materials Science & EngineeringA, 613 (2014) 357-374.
  20. (WP3-T1, WP2-T1) M. Revil-Baudard, A. Jardy, H. Combeau, F. Leclerc, V. Rebeyrolle, Solidification of a vacuum arc remelted zirconium ingot, Metal. Trans., 45B (2014) 51-57.
  21. (WP3-T1) P. Chapelle, C. Noel, A. Risacher, J. Jourdan, A. Jardy, J. Jourdan, Optical investigation of the behavior of the electric arc and the metal transfer during vacuum remelting of a Ti alloy, Journal of Materials Processing Technology, 214 (2014) 2268-2275.
  22. (WP3-T2) G. Fick, O. Mirgaux, P. Neau, F. Patisson, Using biomass for pig iron production: a technical, environmental and economical assessment, Waste and Biomass Valorization, 2013, http://dx.doi.org/10.1007/s12649-013-9223-1.
  23. (WP4-T1) I.J. Beyerlein, J.S. Carpenter, A. Hunter, L.S. Toth, W. Skrotzki, ” Nano-enabled orientation alignment via extreme shear strains”, Scripta Materialia, 2014, doi:10.1016/j.scriptamat.2014.10.032
  24. (WP4-T1) X.H. Du, G.S. Duan, M. Hong, D.P. Wang, B.L. Wu, Y.D. Zhang, C. Esling, Effect of V on the microstructure and mechanical properties of Mg-10Er-2Cu alloy with a long period stacking ordered structure, Materials Letters, 122 (2014) 312-314.
  25. (WP4-T1) F. Wagner, A. Ouarem, C.F. Gu, N. Allain-Bonasso, L.S. Toth, A new method to determine plastic deformation at the grain scale, Materials Characterization, 92 (2014) 106-117.
  26. (WP4-T1) A. Pougis, L.S. Toth, J.J. Fundenberger, A. Borbely, Extension of the Derby-relation to metals severely deformed to their steady-state ultrafine-grain size, Scripta Mater., 72-73 (2014) 59-62.
  27. (WP4-T1) J.J. Jonas, F. Montheillet, L.S. Toth, C. Ghosh, Effects of Varying Twist and Twist Rate Sensitivities on the Interpretation of Torsion Testing Data, Mat. Sci. Eng., A591 (2014) 9-17.
  28. (WP4-T1) C.F. Gu, L.S. Toth, M. Hoffman, Twinning effects in a polycrystalline magnesium alloy under cyclic deformation, Acta Mater., 62 (2014) 212–224.
  29. (WP4-T1) G.S. Duan, B.L. Wu, X.H. Du, X. Zhao, Y.D. Zhang, L. Zuo, C. Esling, Nanostructured extension twins in rapidly compressed Mg-3.0Al-1.0Zn alloy, Materials Science And Engineering A, 614 (2014) 75-80.
  30. (WP4-T1) D. Orlov, R. Lapovok, L.S. Toth, I.B. Timokhina, P.D. Hodgson, A. Haldar, D. Bhattacharjee, Asymmetric rolling of interstitial-free steel using differential roll diameters, Part II: Microstructure and annealing effects, Metall. Trans., A45 (2014) 447-454, DOI 10.1007/s11661-013-1958-6.
  31. (WP4-T1) C.F. Gu, L.S. Toth, S. Rusz, M. Bova, Texture induced grain coarsening in severe plastic deformed low carbon steel, Scripta Materialia, 86 (2014) 36-39.
  32. (WP4-T1) J.J. Jonas, C. Ghosh, L.S. Toth, The Equivalent Strain in High Pressure Torsion, Mat. Sci. Eng. A., 607C (2014) 530-535.
  33. (WP4-T1) G. S Duan, B.L. Wu, X.H. Du, X. Zhao, Y.D. Zhang, L. Zuo, C. Esling, The cyclic frequency sensitivity of low cycle fatigue (LCF) behavior of the AZ31B magnesium alloy, Mater. Sci. Eng. A, 603 (2014) 11-22.
  34. (WP4-T1) C.F. Gu, L.S. Toth, Y.D. Zhang, M. Hoffman, Unexpected brass-type texture in rolling of ultrafine-grained copper, Scripta Materialia, 92 (2014) 51-54.

  35. (WP4-T3) A. Roth, M.A. Lebyodkin, T.A. Lebedkina, J.S. Lecomte, T. Richeton, K.E.K. Amouzou, Mechanisms of anisotropy of mechanical properties of titanium in tension conditions, Mater. Sci. Eng., A596 (2014) 236-243.
  36. T.A. Lebedkina, M.A. Lebyodkin, T.T. Lamark, M. Janecek, Y. Estrin, Effect of equal channel angular pressing on the Portevin-Le Chatelier effect in an Al3Mg Alloy, Mater. Sci. Eng. A615 (2014) 7-13.
  37. (WP4-T4) N. Damil, M. Potier-Ferry, H. Hu, Membrane wrinkling revisited from a multi-scale point of view, Advanced Modeling and Simulation in Enginering Sciences, 1:6, 2014
  38. (WP4-T4) A. Tri, H. Zahrouni, M. Potier-Ferry, Bifurcation indicator based on meshless and asymptotic numerical methods for nonlinear Poisson problem, Numerical Methods for Partial Differential Equations, 30 (2014) 978–993.
  39. (WP4-T4) L.Z. Mansouri, H. Chalal, F. Abed-Meraim, Ductility limit prediction using a GTN damage model coupled with localization bifurcation analysis, Mechanics of Materials, 76 (2014) 64-92.
  40. (WP4-T4) G. Franz, F. Abed-Meraim, M. Berveiller, Effect of Microstructural and Morphological Parameters on the Formability of BCC Metal Sheets, Steel Research International, 85 (2014) 980-987. DOI: 10.1002/srin.201300166.
  41. (WP4-T4) F. Xu, H. Hu, M. Potier-Ferry, S. Belouettar, Bridging techniques for pattern formation modelling, International Journal of Solids and Structures, 51 (2014) 3119–3134.
  42. (WP4-T4) F. Xu, H. Hu, M. Potier-Ferry, 3D finite element modeling for instabilities in thin films on soft substrates, International Journal of Solids and Structures, 51, (2014) 3619–3632.
  43. (WP4-T4) F. Xu, M. Potier-Ferry, S. Belouettar, H. Hu, Multiple bifurcations in wrinkling analysis of thin films on compliant substrates, International Journal of Non-Linear Mechanics, In press, doi:10.1016/j.ijnonlinmec.2014.12.006
  44. (WP5-T1) N. Xu, J-M. Raulot, Z.B. Li, Y.D. Zhang, J. Bai, W. Peng, X.Y. Meng, X. Zhao, L. Zuo, C. Esling, Composition dependent phase stability of Ni-Mn-Ga alloys studied by ab initio calculations, Journal of Alloys And Compounds, 614 (2014) 126-130.
  45. (WP5-T2) K. Akoussan, H. Boudaoud, E.M. Daya, E. Carrera, Vibration modeling of multilayers composite structures with viscoelastic layers, Mechanics of Advanced Materials and Structures, (2014), accepted.
  46. (WP5-T2) F. Boumediene, J-M. Cadou, L. Duigou, E-M. Daya, A Reduction Model for Eigensolutions of Damped Viscoelastic Sandwich Structures, Mechanics Research Communications, 57 (2014) 74-81.
  47. (WP5-T3) T. Richeton, S. Berbenni, From bicrystals to spherical inclusions: a superposition method to derive analytical expressions of stress fields in presence of plastic strain gradients, Int. J. Solids Struct., 51 (2014) 794–807.
  48. (WP5-T3) C. Fressengeas, V. Taupin, A field theory of distortion incompatibility for coupled fracture and plasticity, in press, J. Mech. Phys. Solids 68 (2014) 45–65.
  49. (WP5-T3) S. Berbenni, V. Taupin, K.S. Djaka, C. Fressengeas, A numerical spectral approach for solving elasto-static field dislocation and g-disclination mechanics, International Journal of Solids and Structures, 51 (2014) 4157–4175.
  50. (WP5-T3) R. Dingreville, A. Hallil, S. Berbenni, From coherent to incoherent mismatched interfaces: A generalized continuum formulation of surface stresses, Journal of the Mechanics and Physics of Solids, 72 (2014) 40-60.
  51. (WP5-T4) S. Berbenni, F. Wagner, N. Allain-Bonasso, On the roles of grain size dispersion and microscale Hall-Petch Relation on the plastic behaviour of polycrystalline metals, Mater. Trans. – The Japan Institute of Metals, 55 (2014) 39-43.
  52. (WP5-T4) P.A. Juan, S. Berbenni, M.R. Barnett, C.N. Tome, L. Capolungo, A double inclusion homogenization scheme for polycrystals with hierarchal topologies: application to twinning in Mg alloys, International Journal of Plasticity, 60 (2014) 182-196.

2013:

  1. (WP1-T1) H.P. Van Landeghem, M. Gouné, T. Epicier, A. Redjaïmia, Unexpected low-temperature crystallization of amorphous silicon nitride into α-Si3N4 in a ferritic Fe-Si matrix, Scripta Mater., 68 (2013) 187–190, DOI: http://dx.doi.org/10.1016/j.scriptamat.2012.10.014.
  2. (WP1-T2) J. Guyon, A. Hazotte, J.P. Monchoux, E. Bouzy, Effect of powder state on spark plasma sintering of TiAl alloys, Intermetallics, 34 (2013) 94-100.
  3. (WP1-T3) S. Biswas, B. Beausir, L. S. Toth, S. Suwas, Evolution of texture and microstructure during hot torsion of a magnesium alloy, Acta Mater., 61 (2013) 5263-5277.
  4. (WP1-T3) L.S. Tóth, S. Biswas, C.F. Gu, B. Beausir, Notes on representing grain size distributions obtained by electron backscatter diffraction, Materials Characterization, 84 (2013) 67-71.
  5. (WP1-T3) M. Gallouze, A. Kellou, D. Hamoutene, T. Grosdidier, M. Drir, Absorption and adsorption of hydrogen in B2-FeA1: Ab initio study, Physica B-Condensed Matter, 416 (2013) 1-7.
  6. (WP1-T5) D. Sornin, T. Grosdidier, J. Malaplate, I. Tiba, P. Bonnaillie, N. Allain-Bonasso, D. Nunes, Microstructural study of an ODS stainless steel obtained by Hot Uni-axial Pressing, J. Nuclear Materials, 439 (2013) 19-24.
  7. (WP2-T1) N. Siredey-Schwaller, J. Ruiz-Vargas; P. Bocher, Alain Hazotte, First Melting Stages During Isothermal Brazing of Ni/Bni-2 Couples, J. Mater. Proc. Techn., 213 (2013) 2074-2080.
  8. (WP2-T1) J. Ruiz-Vargas, N. Siredey-Schwaller, N. Gey, P. Bocher, A. Hazotte, Microstructure development during isothermal brazing of Ni/BNi-2 couples, J. Mater. Proc. Techn., 213 (2013) 20–29.
  9. (WP2-T1-WP5-T5) A. Kumar, M. Založnik, H. Combeau, B. Goyeau, D. Gobin, Numerical simulation of columnar solidification: influence of inertia on channel segregation, Modelling and Simulation in Materials Science and Engineering, 21 (2013) 045016.
  10. (WP2-T3) Z.B. Li, N. Xu, Y.D. Zhang, C. Esling, J-M Raulot, X. Zhao, L. Zuo, Composition-dependent ground state of martensite in Ni-Mn-Ga alloys, Acta Mater., 61 (2013) 3858-3865.
  11. (WP2-T3) H. Zenasni, H.I. Faraoun, C. Esling, First-principle prediction of half-metallic ferrimagnetism in Mn-based full-Heusler alloys with highly ordered structure,J. Mag. Mag. Mater., 333 (2013) 162-168. Available online doi:10.1016/j.jmmm.2013.01.003
  12. (WP2-T3) L. Li, Y. D. Zhang, C. Esling, K. Qin, Z. Zhao, Y. Zuo, Jianzhong Cui, A microstructural and crystallographic investigation of the precipitation behaviour of a primary Al3Zr phase under a high magnetic field, J. Appl. Cryst., 46 (2013), 421-429, doi:10.1107/S0021889813001258 (2013).
  13. (WP2-T3) B. Yang, Z.B. Li, Y.D. Zhang, G.W. Qin, C. Esling, O. Perroud, X. Zhao, L. Zuo, Microstructural features and orientation correlations of non-modulated martensite in Ni-Mn-Ga expitaxial thin films, Acta Mater., 61 (2013) 6809-6820.
  14. (WP2-T3) J.S. Wang, B. Yang, W.L. Pei, G.W. Qin, Y. Zhang, C. Esling, X. Zhao, L. Zuo, Structural and magnetic properties of L1(0)-FePt/Fe exchange coupled nano-composite thin films with high energy product, J. Magn. Magn. Mater., 345 (2013) 165-170.
  15. (WP2-T3) X.X. Zhang, N. Xu, S.J. Wang, Y.D. Zhang, J-M. Raulot, C. Esling, X. Zhao, L. Zuo, Magnetic-field-enhanced carbon solution in proeutectoid ferrite, J. Phys. D: Appl. Phys., 46 (2013) 385002 (4pp).
  16. (WP2-T4) C.F. Gu, L.S. Tóth, D.P. Field, J.J. Fundenberger, Y.D. Zhang, Room temperature equal channel angular pressing of a magnesium alloy, Acta Mater., 61 (2013) 3027-3036.
  17. (WP2-T4) K.M. Zhang, J.X. Zou, T. Grosdidier, Nanostructure Formations and Improvement in Corrosion Resistance of Steels by Means of Pulsed Electron Beam Surface Treatment, J. Nanomaterials, 2013, 78568-78568.
  18. (WP2-T4) K.M. Zhang, J.X. Zou, B. Bolle, T. Grosdidier, Evolution of residual stress states in surface layers of an AISI D2 steel treated by low energy high current pulsed electron beam, Vacuum, 87 (2013) 60-68.
  19. (WP2-T4) L.S. Toth, C.F. Gu, Modeling of disorientation axis distribution in severely deformed copper, Scripta Mater., 69 (2013) 183–186.
  20. (WP2-T4) S.Z. Hao, Y. Zhang, Y. Xu, N. Gey, T. Grosdidier, C. Dong, WC/Co composite surface structure and nano graphite precipitate induced by high current pulsed electron beam irradiation, Applied Surface Science, 285 (2013) 552-556.
  21. (WP2-T4) Samih Y, Beausir B, Bolle B, Grosdidier T, In-depth quantitative analysis of the microstructures produced by Surface Mechanical Attrition Treatment (SMAT), Materials Characterization, 83 (2013) 129-138.
  22. (WP2-T4) J.X. Zou, K.M. Zhang, T. Grosdidier, C. Dong, Analysis of the evaporation and re-condensation processes induced by pulsed beam treatments, Int. J. Heat And Mass Transfer, 64 (2013) 1172-1182.
  23. (WP2-T4) Y. Xu, Y. Zhang, S.Z. Hao, O. Perroud, M.C. Li, H.H. Wang, T. Grosdidier, C. Dong, Surface microstructure and mechanical property of WC-6% Co hard alloy irradiated by high current pulsed electron beam, Applied Surface Science, 279 (2013) 137-141.
  24. (WP3-T1) J.P. Bellot, V. De Felice, B. Dussoubs, A. Jardy, S. Hans, Coupling of a CFD and a PBE calculations to simulate the behavior of an inclusion population in a gas-stirring ladle, Metall. Mater. Trans., B, 2013, DOI: 10.1007/s11663-013-9940-7.
  25. (WP3-T1) A. Jardy, Numerical simulation and experimental investigation of remelting processes. The Paton Welding Journal, 10-11 (2013) 86-91.
  26. (WP3-T1) J.P. Bellot, V. Descotes, A. Jardy, Numerical modeling of inclusion behavior in liquid metal processing, J. Metals, 65 (2013) 1164-1172.
  27. (WP4-T1) B.L. Wu, G. Wan, X.H. Du, Y.D. Zhang, F. Wagner, C. Esling, The quasi-static mechanical properties of extruded binary Mg-Er alloys, Mater. Sci. Eng., A573 (2013) 205-214. Available online doi:10.1016/j.msea.2013.02.048
  28. (WP4-T1) L. Bao, Y. Zhang, C. Schuman, J-S. Lecomte, M-J. Philippe, X. Zhao, C. Esling, Multiple twinning in pure hexagonal close-packed titanium, Journal of Applied Crystallography, 46 (2013) 1397-1406.
  29. (WP4-T1) E.E. Patterson, D.P. Field, Y. Zhang, Characterization of twin boundaries in an Fe-17.5Mn-0.56C twinning induced plasticity steel, Materials Characterization, 85 (2013), 100-110.
  30. (WP4-T1) D. Orlov, A. Pougis, R. Lapovok, L.S. Toth, I.B. Timokhina, P.D. Hodgson, A. Haldar, D. Bhattacharjee, Asymmetric rolling of interstitial-free steel using differential roll diameters. Part I: Mechanical properties and deformation textures, Metall. Mater. Trans, A44 (2013) 4346-4359, DOI 10.1007/s11661-013-1791-y.
  31. (WP4-T1) A. Pougis, S. Philippon, R. Massion, L. Faure, J-J. Fundenberger, L.S. Toth, Dry friction of steel under high pressure in quasi-static conditions, Tribology International, 67 (2013) 27-35.
  32. (WP4-T1) W. Skrotzki, A. Eschke, B. Joni, T. Ungar, L.S. Toth, Y. Ivanisenko, L. Kurmanaeva, New experimental insight into the mechanisms of nanoplasticity, Acta Mater., 61 (2013) 7271–7284.
  33. (WP4-T1) C. Geng, X. Du, B. Wu, Y. Wang, Y.D. Zhang, C. Esling, Low cycle fatigue behavior under asymmetric loading of two AZ31B magnesium alloys with different microstructures and textures, International Journal of Materials Research, 104 (2013) 966-973.
  34. (WP4-T2) P.A. Romero, G. Anciaux, A. Molinari, J.F. Molinari, Insights into the thermo-mechanics of orthogonal nanometric machining, Computational Mater. Sci., 72 (2013) 116-126.
  35. (WP4-T2) M.H. Miguélez, X. Soldani, A. Molinari, Analysis of adiabatic shear banding in orthogonal cutting of Ti alloy, Int. J. Mech. Sci., 75 (2013) 212–222.
  36. (WP4-T2) A. Molinari, X. Soldani, M.H. Miguélez, Adiabatic shear banding and scaling laws in chip formation with application to cutting of Ti–6Al–4V, J. Mech. Phys. Solids, 61 (2013) 2331–2359.
  37. (WP4-T3) L. Dirand, A. Jacques, J. Chateau-Cornu, T. Schenk, O. Ferry, P. Bastie, Phase-specific high temperature creep behaviour of a pre-rafted Ni-based superalloy studied by X-ray synchrotron diffraction, Phil. Mag., 93 (2013) 1384–1412.
  38. (WP4-T3) L. Dirand, Jonathan Cormier, A. Jacques, J. P. Chateau-Cornu, T. Schenk, O. Ferry, P. Bastie, Measurement of the effective γ/γ′ lattice mismatch during high temperature creep of Ni-based single crystal superalloy, Materials Characterization, 77 (2013) 32–46.
  39. (WP4-T3) M.A. Lebyodkin, I.V. Shashkov, T.A. Lebedkina, K. Mathis, P. Dobron, F. Chmelik, Role of superposition of dislocation avalanches on the statistics of acoustic emission during plastic deformation, Phys. Rev., E88 (2013) 042402.
  40. (WP4-T4) N. Damil, M. Potier-Ferry, H. Hu, New nonlinear multiscale models for wrinkled membranes, Comptes Rendus Mecanique, 341 (2013) 616–624.
  41. (WP4-T4) Y. Tampango, M. Potier-Ferry, Y. Koutsawa, S. Tiem, Coupling of polynomial approximations with application to a boundary meshless method, Int. J. Numerical Methods in Engineering, 95 (2013) 1094–1112.
  42. (WP4-T4) G. Franz , F. Abed-Meraim, M. Berveiller, Strain localization analysis for single crystals and polycrystals: Towards microstructure-ductility linkage, Int. J. Plast., 48 (2013) 1-33.
  43. (WP4-T4) G. Franz , F. Abed-Meraim, T. Ben Zineb, Effect of microstructural and physical mechanisms on mechanical properties of single-phase steels, Advanced Science Letters, 19 (2013) 346-350.
  44. (WP4-T4) G. Franz, F. Abed-Meraim, M. Berveiller, Impact of intragranular substructure parameters on the forming limit diagrams of single-phase B.C.C. steels, Materials, 6 (2013) 5217-5233.
  45. (WP5-T1) J. Bai, N. Xu, J-M. Raulot, Y.D. Zhang, C. Esling, X. Zhao, L. Zuo, Defect formation energy and magnetic properties of off-stoichiometric Ni-Mn-In alloys by first-principles calculations, Journal of Applied Physics, 113 (2013) 174901.
  46. (WP5-T1) M. Salib, J. Teixeira, L. Germain, E. Lamielle, N. Gey, E. Aeby-Gautier, Influence of transformation temperature on microtexture formation associated with alpha precipitation at beta grain boundaries in a beta metastable titanium alloy, Acta Mater., 61 (2013) 3758-3768.
  47. (WP5-T1) H.I. Faraoun, F.Z. Abderrahim, C. Esling, First principle calculations of MAX ceramics Cr2GeC, V2GeC and their substitutional solid solutions, Computational Materials Science, 74 (2013) 40-49.
  48. (WP5-T2) K. Attipou, S. Nezamabadi, E-M. Daya, H. Zahrouni,A multiscale approach for the vibration analysis of heterogeneous materials: Application to passive damping, J. Sound and Vibration, 332 (2013) 725-739.
  49. (WP5-T2) W.L. Azoti, A. Tchalla, Y. Koutsawa, A. Makradi, G. Rauchs, S. Belouettar, H. Zahrouni, Mean-field constitutive modeling of elasto-plastic composites using two incremental formulations, Composite Structures, 105 (2013) 256–262.
  50. (WP5-T2) A. Tchalla, S. Belouettar, A. Makradi, H. Zahrouni, An ABAQUS toolbox for multiscale finite element computation, Composites, Part B: Engineering, 52 (2013) 323–333.
  51. (WP5-T2) Y. Cong, J. Yvonnet, H. Zahrouni, Simulation of instabilities in thin nanostructures by a perturbation approach, Computational Mechanics, 2013. DOI 10.1007/s00466-013-0927-7.
  52. (WP5-T5) A. Kumar, M. Zaloznik, H. Combeau, B. Goyeau, D. Gobin, A numerical simulation of columnar solidification: influence of inertia on channel segregation, Modelling and Simulation in Materials Science and Engineering, 21 (2013) 045016.

2012:

  1. (WP1-T2) M. Charpentier, D. Daloz, A. Hazotte, Interaction between phase transformation and compression sintering in a TiAl-based intermetallic alloy, Kovové Mater, 50 (2012) 301–307.
  2. (WP1 T2) G. Brunetti, A. Settefrati, A. Hazotte, S. Denis, J.J. Fundenberger, A. Tidu, E. Bouzy, Determination of gamma-gamma’ lattice misfit in a single-crystal nickel-based superalloy using convergent beam electron diffraction aided by finite element calculations, Micron, 43 (2012) 396-406.
  3. (WP2 T3) Z. B. Li, Y. D. Zhang, C. Esling, X. Zhao, L. Zuo, Evidence for a monoclinic incommensurate superstructure in modulated martensite, Acta Mater., 60 (2012) 6982-6990.
  4. (WP2 T3) X. Zhang, Y. Zhang, M. Gong, C. Esling, X. Zhao, L. Zuo, Magnetic-field-induced microstructural features in a high carbon steel during odiffusional phase transformation, Journal of Magnetism and Magnetic Materials, 324 (2012) 4184-4188.
  5. (WP2-T3) J. Bai, N. Xu, J-M Raulot, Y.D. Zhang, C. Esling, X. Zhao, L. Zuo, First-principles investigations of crystallographic, magnetic, and electronic structures in Ni2XIn (X = Mn, Fe, and Co), Journal of Applied Physics, 112 (2012) 114901.
  6. (WP2-T4) C.F. Gu, L.S. Toth, Texture development and grain refinement in non-equal channel angular pressed Al, Scripta Mater., 67 (2012) 33–36.
  7. (WP2-T4) M. Arzaghi, J.J. Fundenberger, L.S. Toth, R. Arruffat, L. Faure, B. Beausir, X. Sauvage,Microstructure, Texture and Mechanical Properties of Aluminum processed by High Pressure Tube Twisting, Acta Mater., 60 (2012) 4393-4408.
  8. (WP2-T4) A. Fillon, X. Sauvage, A. Pougis, O. Bouaziz, D. Barbier, R. Arruffat, L.S. Toth, Influence of severe plastic deformation on the precipitation hardening of a FeSiTi steel, J. Mat. Sci., 47 (2012) 7939-7945.
  9. (WP2-T4) K.M. Zhang, J.X. Zou, T. Grosdidier, C. Dong, Crater-formation-induced metastable structure in an AISI D2 steel treated with a pulsed electron beam, Vacuum, 86 (2012) 1273-1277.
  10. (WP3-T2) A. Ranzani Da Costa, D. Wagner, F. Patisson, Modelling a new, low CO2 emissions, hydrogen steelmaking process, J. Cleaner Production, 2012, http://dx.doi.org/10.1016/j.jclepro.2012.07.045.
  11. (WP4-T1) C.F. Gu, L.S. Toth, Polycrystal modeling of tensile twinning in a Mg alloy during cyclic loading, Scripta Mater.,67 (2012) 673-676.
  12. (WP4-T1) Zs. Kovacs, L.S. Toth, J. Lendvai, Ideal elasto-plastic behavior in torsional deformation of Zr44Ti11Cu10Ni10Be25 bulk metallic glass, J. Alloys and Compounds, 542 (2012) 85–89.
  13. (WP4-T1) A. Pougis, L.S. Toth, O. Bouaziz, J-J. Fundenberger, D. Barbier, R. Arruffat, Stress and strain gradients in high-pressure tube twisting, Scripta Mater., 66 (2012) 773-776.
  14. (WP4-T3) J. B. Le Graverend, L. Dirand, A. Jacques, J. Cormier, O. Ferry, T. Schenk, F. Gallerau, S. Kruch, J. Mendez, In situ measurement of the γ/γ′ lattice mismatch evolution of a nickel-based single crystal superalloy during non-isothermal very high temperature creep experiments, Metall. Mater. Trans., 43A (2012) 3946–3951.
  15. (WP4-T2) P.A Romero, G. Anciaux, A. Molinari, J.F. Molinari, Friction at the tool–chip interface during orthogonal nanometric machining, Modelling Simul. Mater. Sci. Eng., 20 (2012) 055007.
  16. (WP5-T2) I. Elkhaldi, I. Charpentier, E-M. Daya, A gradient method for viscoelastic behaviour identification of damped sandwich structures, Comptes Rendus Mécanique, 340 (2012) 619-623.