Publications



Open Access
ISBN 978-3-03936-158-8 (Pbk); ISBN 978-3-03936-159-5 (PDF)
https://doi.org/10.3390/books978-3-03936-159-5
© 2020 by the authors; CC BY licence

Design of Alloy Metals for Low-Mass Structures
Laszlo S. Toth Sciprofile link and Sabine Denis Sciprofile link (Eds.)

Pages: 460
Published: July 2020
(This book is a printed edition of the Special Issue Design of Alloy Metals for Low-Mass Structures that was published in Materials)

Download PDF

 

 

 

 

 

Publication list LabEx DAMAS

Peer reviewed papers

Period: 2012 March – 2021 March

 

Articles en Rang A mentionnant du Labex DAMAS
Période 2012 mars-2021 mars

Auteurs chercheurs DAMAS sont soulignés. Damas invité, postdoc ou doctorants sont en italique.

Labex DAMAS affiliated / acknowledged peer reviewed publications
Period: March 2012 – March 2021

The DAMAS authors are underlined. The DAMAS invited professors, the DAMAS post-doctorates or DAMAS doctorate students are marked in italics.

2021

  1. Jongun Moona, Olivier Bouaziz, Hyoung Seop Kim, Yuri Estrin. Twinning engineering of high-entropy alloys: An exercise in process optimization and modeling, Materials Science & Engineering A 822 (2021) 141681. www.sciencedirect.com
  2. Berbenni S., Lebensohn R.A. (2021). A numerical study of reversible plasticity using continuum dislocation mechanics. COMPTES RENDUS DE PHYSIQUE, In Press (corrected proof).
  3. Mikhail A. Lebyodkin and Tatiana A. Lebedkina, The Portevin-Le Chatelier Effect and Beyond, in: “Fundamental Studies of High Entropy Materials“, SPRINGER NATURE, Berlin (in press). (2021)
  4. Julien Genee, Nathalie Gey, Ricardo A Lebensohn, F. Bonnet, Stephane Berbenni, Experimental and numerical investigation of key microstructural features influencing the localization of plastic deformation in Fe-TiB2 metal matrix composite, Journal of Materials Science, accepted 2021.
  5. O. Bouaziz, R. Massion, R. Aouafi, Sandwich materials with a crumpled aluminium core, METALL. RES. TECHNOL., in press (2021)
  6. Mingyu Gong, J. Graham, Vincent Taupin , Laurent Capolungo (2021). The effects of stress, temperature and facet structure on growth of {10-12} twins in Mg: A molecular dynamics and phase field study. Acta Materialia, 208:116603. DOI: 10.1016/j.actamat.2020.116603. Réf. HAL: hal-03138713.
  7. Moon, O. Bouaziz, H.S Kim, Y. Estrin, Twinning engineering of high-entropy alloys: An exercise in process optimization and modelling, ACTA MATER., in press (2021)
  8. Moon, O. Bouaziz, H.S Kim, Y. Estrin, SCRIPTA MATER., Twinning Engineering of a CoCrFeMnNi High-Entropy Alloy Inspired by Twinning-Induced Plasticity Steels, 197 (2021) 113308
  9. S. Toth, Self-organized behaviour of deforming polycrystals, VID. PROC. AD. MATER., 2 (2021), article ID 2102114, DOI:10.5185/vpoam.2021.02114
  10. Hasani, M. Sepsi, S. Feyzi, L. S. Toth, Deformation Field and Texture Analysis in T-ECAP Using a Flow Function, MATERIALS CHARACTERIZATION (IF=3.6), 173 (2021) paper no. 110912, https://doi.org/10.1016/j.matchar.2021.110912
  11. Abhishek Pariyar, Laszlo S. Toth, Satish V. Kailas, Laurent Peltier, Imparting high-temperature grain stability to an Al-Mg alloy, SCRIPTA MATER., 190 (2021) 141-146, https://doi.org/10.1016/j.scriptamat.2020.08.035
  12. Qian Wang , Shiying Wang , Patrick Moll, Auriane Mandrelli , Jean-Sébastien Lecomte, Christophe Schuman, Microstructure evolution of commercial pure titanium during interrupted in-situ tensile test, METALLURGICAL AND MATERIALS TRANSACTIONS A, (2021), In press
  13. Julien Guénolé, Muhammad Zubair, Swagata Roy, Zhuocheng Xie, Marta Lipińska-Chwałek, Stefanie Sandlöbes-Haut, Sandra Korte-Kerzel, “Exploring the transfer of plasticity across Laves phase interfaces in a dual phase magnesium alloy”, MATERIALS & DESIGN 202 (2021) 109572 https://doi.org/10.1016/j.matdes.2021.109572
  14. Sharma, B.; Denand, B.; Harcuba, P.; Geandier, G.; Ameyama, K.; Dirras, G. & Aeby-Gautier, E. Effect of mechanical milling on the harmonic structure development during spark plasma sintering of Ti-5Al-2Sn-4Zr-4Mo-2Cr-1Fe upbeta-metastable titanium alloy (upbeta-Cez alloy) . JOURNAL OF ALLOYS AND COMPOUNDS, Elsevier BV, 2021, 860, 158483, DOI:10.1016/j.jallcom.2020.158483f
  15. Wassim Jrad, Foudil Mohri, Guillaume Robin and El Mostafa Daya Numerical and Experimental Analyses of Free and Forced Vibration of Thin-Walled Beams INTERNATIONAL JOURNAL OF STRUCTURAL 1 STABILITY AND DYNAMICS 21, 2 (2021) 2150018 (21 pages). World Scientific Publishing Company DOI: 10.1142/S0219455421500188. Article in Press
  16. Soltani, M.Atoufi, F.Mohri, F.Dimitri, R.Tornabene, F. Nonlocal elasticity theory for lateral stability analysis of tapered thin-walled nanobeams with axially varying materials. THIN-WALLED STRUCTURES, 2021, 159, 107268
  17. Chen X., Richeton T., Motz C., Berbenni S. (2021). Surface effects on image stresses and dislocation pile-ups in anisotropic bi-crystals. INTERNATIONAL JOURNAL OF PLASTICITY, :102967. DOI: https://doi.org/10.1016/j.ijplas.2021.102967. Réf. HAL: hal-03157931
  18. Yu W., Guénolé J., Ghanbaja J., Vallet M., Guitton A. (2021). Frank partial dislocation in Ti2AlC-MAX phase induced by matrix-Cu diffusion. Scripta Materialia, 191:34-39. DOI: https://doi.org/10.1016/j.scriptamat.2020.09.007. Réf. HAL: hal-02940841
  19. Yan H.-L., Zhang Y. D., Esling C., Zhao X., Zuo L. (2021). Determination of strain path during martensitic transformation in materials with two possible transformation orientation relationships from variant self-organization. ACTA MATER., 202:112-123. DOI: https://doi.org/10.1016/j.actamat.2020.10.054. Réf. HAL: hal-03079277
  20. Purushottam Raj Purohit R. R. P., Richeton T., Berbenni S., Germain L., Gey N., Connolley T., Castelnau O. (2021). Estimating single-crystal elastic constants of polycrystalline β metastable titanium alloy: A Bayesian inference analysis based on high energy X-ray diffraction and micromechanical modeling. Acta Materialia, 208:1-22. DOI: https://doi.org/10.1016/j.actamat.2021.116762. Réf. HAL: hal-03156360
  21. Maurel P., Weiss L., Bocher P., Grosdidier T. (2021). Effects of SMAT at cryogenic and room temperatures on the kink band and martensite formations with associated fatigue resistance in a β-metastable titanium alloy. Materials Science and Engineering: A, 803:140618. DOI: https://doi.org/10.1016/j.msea.2020.140618. Réf. HAL: hal-03140210
  22. Li Y., Založnik M., Zollinger J., Dembinski L., Mathieu A. (2021). Effects of the powder, laser parameters and surface conditions on the molten pool formation in the selective laser melting of IN718. Journal of Materials Processing Technology, 289:116930. DOI: https://doi.org/10.1016/j.jmatprotec.2020.116930. Réf. HAL: hal-02978802
  23. Ernould C., Beausir B., Fundenberger J.-J., Taupin V., Bouzy E. (2021). Integrated correction of optical distortions for global HR-EBSD techniques. Ultramicroscopy, 221:113158. DOI: https://doi.org/10.1016/j.ultramic.2020.113158. Réf. HAL: hal-03138727
  24. Ben Haj Slama M., Taupin V., Maloufi N. A., Venkatraman K., Rollett A., Lebensohn R., Berbenni S., Beausir B., Guitton A. (2021). Electron Channeling Contrast Imaging characterization and crystal plasticity modelling of dislocation activity in Ti21S BCC material. Materialia, 15:100996. DOI: https://doi.org/10.1016/j.mtla.2020.100996. Réf. HAL: hal-03094460
  25. Ben Bettaieb, F. Abed-Meraim, Formability prediction of substrate-supported metal layers using a non-associated plastic flow rule, Journal of Materials Processing Technology, 287, 116694 (2021), https://doi.org/10.1016/j.jmatprotec.2020.116694
  26. Zhu JC, Ben Bettaieb M, Abed-Meraim F. [2021] Comparative study of three techniques for the Formability prediction of substrate-supported tangent moduli by periodic homogenization scheme. Engineering with Computers, (org/10.1007/s00366-020-01091-y), 30 pp., https://doi.org/10.1007/s00366-020-01091-y
  27. Macchi, J.; Gaudez, S.; Geandier, G.; Teixeira, J.; Denis, S.; Bonnet, F. & Allain, S. Y., Dislocation densities in a low-carbon steel during martensite transformation determined by in situ high energy X-Ray diffraction Materials Science & Engineering A, 2021, 800, 140249
  28. Abdelkrim Redjaïmia, Editeur Invité, Special Issue “Phase Transformations and Structure/Property Relationship in Duplex Austenitic-Ferritic Stainless Steels” in Materials, 2021.

2020

  1. (WP1-T1) de Formanoir, C, Martin, G, Prima, F, Allain, SYP, Dessolier, T, Sun, F, Vives, S, Hary, B, Brechet, Y, Godet, S. Micromechanical behavior and thermal stability of a dual-phase alpha plus alpha ‘ titanium alloy produced by additive manufacturing, ACTA MATERIALIA 162 (2019) 149-162.
  2. (WP1-T1) Czerwiec, A. Andrieux, G. Marcos, H. Michel, Ph Bauer, Is “expanded austenite” really a solid solution? Mössbauer observation of an annealed AISI 316L nitrided sample, Journal of Alloys and Compounds 811 (2019) 151972
  3. (WP2-T2) H. Mansour, M.A. Crimp, N. Gey, X. Iltis, N. Maloufi, Dislocation analysis of a complex sub-grain boundary in UO2 ceramic using accurate electron channelling contrast imaging in a scanning electron microscope, CERAMICS INTERNATIONAL, DOI:doi.org/10.1016/j.ceramint.2019.06.091, (2019).
  4. (WP1-T2) Yi Chen, Hongchao Kou, Liang Cheng, Ke Hua, Lingyan Sun, Yalin Lu, Emmanuel Bouzy, Crystallography of phase transformation during quenching from β phase field of a V-rich TiAl alloy, JOURNAL OF MATERIALS SCIENCE (IF=2.99), 54 (2019) 1844-1856.
  5. (WP2-T2) L. Germain, N. Gey, M. Humbert, Reconstruction of deformed parent grains from microstructure inherited by phase transformations, SCRIPTA MATERIALIA, 158 (2019) 91-94.
  6. (WP1 – T3) J Martin, AV Nominé, J Stef, A Nominé, JX Zou, G Henrion, T Grosdidier, The influence of metallurgical state of substrate on the efficiency of plasma electrolytic oxidation (PEO) process on magnesium alloy, MATERIALS & DESIGN, 178, (2019), 107859
  7. (WP2-T1) Olmedilla, M. Založnik, T. Messmer, B. Rouat, H. Combeau, Packing dynamics of spherical and non-convex grains sedimenting at low Stokes number, PHYSICAL REVIEW E 99 (2019) 012907. doi:10.1103/PhysRevE.99.012907.
  8. (WP1-T3) Martin, A. Nominé, V. Ntomprougkidis, S. Migot, S. Bruyère, F. Soldera, T. Belmonte, G. Henrion, Formation of a metastable nanostructured mullite during Plasma Electrolytic Oxidation of aluminium in “soft” regime condition., MATERIALS AND DESIGN 180 (2019) 107977 (14 p.) https://doi.org/10.1016/j.matdes.2019.107977
  9. (WP1) Ntomprougkidis, J. Martin, A. Nominé, G. Henrion, Sequential run of the PEO process with various current waveforms as a way to improve the process energy efficiency, SURF. COAT. TECHNOL. 374 (2019) 713-724 https://doi.org/10.1016/j.surfcoat.2019.06.057
  10. (WP1-T4) Létoffé, S.G. Rodríguez, S. Hoppe, N. Canilho, O. Godard, A. Pasc, I. Royaud, M. Ponçot, Switching from brittle to ductile isotactic polypropylene-g-maleic anhydride with capped-end polyetherdiamine as chains crosslinking agent. POLYMER, 164, 67–78, (2019).
  11. (WP1-T4) L Weiss, Y Nessler, M Novelli, P Laheurte, T Grosdidier, On the Use of Functionally Graded Materials to Differentiate the Effects of Surface Severe Plastic Deformation, Roughness and Chemical Composition on Cell Proliferation Metals 9 (12), 1344, 2019.
  12. (WP1-T4) T Grosdidier, M Novelli, Recent Developments in the Application of Surface Mechanical Attrition Treatments for Improved Gradient Structures: Processing Parameters and Surface Reactivity, MATERIALS TRANSACTIONS 60 (7), 1344-1355, 2019
  13. (WP1 – T5) J Huot, F Cuevas, S Deledda, K Edalati, Y Filinchuk, T Grosdidier, et al., Mechanochemistry of metal hydrides: recent advances, MATERIALS 12, (2019) 2778.
  14. (WP2-T2) Pakanati, K.O. Tveito, M. M’Hamdi, H. Combeau, M. Založnik, Application of an Equiaxed Grain Growth and Transport Model to Study Macrosegregation in a DC Casting Experiment, METALLURGICAL AND MATERIALS TRANSACTIONS A 50 (2019) 1773–1786. doi:10.1007/s11661-019-05133-z.
  15. Moreno, M., Teixeira, J., Ghanbaja, J., Bonnet, F., Allain, S. Evolution of cementite composition along the processing of cold-rolled and annealed Dual-Phase steels. MATERIALIA, 6, (2019) 100179.
  16. Moreno, M., Teixeira, , Geandier, G., Hell, J. C., Bonnet, F., Salib, M., Allain, S. Real-Time Investigation of Recovery, Recrystallization and Austenite Transformation during Annealing of a Cold-Rolled Steel Using High Energy X-ray Diffraction (HEXRD). METALS, 9 (2019).
  17. Gouné, M., Aoued, S., Danoix, F., Geandier, G., Poulon-Quintin, A., Hell, J. C., Allain, S. Y. P. Alloying-element interactions with austenite/martensite interface during quenching and partitioning of a model Fe-C-Mn-Si alloy. SCRIPTA MATERIALIA, 162, (2019) 181-184.
  18. Santajuana, M. A., Eres-Castellanos, A., Ruiz-Jimenez, V., Allain, S., Geandier, G., Caballero, F. G., Garcia-Mateo, C. Quantitative Assessment of the Time to End Bainitic Transformation. METALS, 9 (2019) 925.
  19. (WP2-T3) Li, Dong, Li, Zongbin, Yang, Jiajing, Li, Zhenzhuang, Yang, Bo, Yan, Haile, Wang, Dunhui, Hou, Long, Li, Xi, Zhang, Yudong, Esling, Claude, Zhao, Xiang, Zuo, Liang, Large elastocaloric effect driven by stress-induced two-step structural transformation in a directionally solidified Ni55Mn18Ga27 alloy, SCRIPTA MATERIALIA, 163 (2019) 116-120.
  20. (WP2-T3) Li, ZZ, Li, ZB, Yang, JJ, Li, D, Yang, B, Yan, HL, Nie, ZH, Hou, L
    Li, X, Zhang, YD, Esling, C, Zhao, X, Zuo, Large elastocaloric effect in a polycrystalline Ni45.7Co4.2Mn37.3Sb12.8 alloy with low transformation strain, SCRIPTA MATERIALIA, 162 (2019) 486-491.
  21. (WP2-T3) Bao, L, Le, QC, Zhang, ZQ, Esling, C. A novel degradation rate controlling mechanism of biocompatible Mg-Zn-Y-Zr alloys, MATERIALS LETTERS 235 (2019) 189-192.
  22. (WP2-T3) Li, ZB, Dong, SY, Li, ZZ, Yang, B, Liu, F, Sanchez-Valdes, CF, Llamazares, JLS, Zhang, YD, Esling, C, Zhao, X, Zuo, L. Giant low-field magnetocaloric effect in Si alloyed Ni-Co-Mn-In alloys, SCRIPTA MATERIALIA 159 (2019) 113-118.
  23. (WP2-T3) Li, ZB ; Yang, B ; Zhang, YD; Esling, C; Zhao, X; Zuo, L. Crystallographic insights into diamond-shaped 7M martensite in Ni-Mn-Ga ferromagnetic shape-memory alloys, IUCRJ, 6 (2019) 909-920.
  24. (WP2-T3) Zou, NF; Li, ZB ; Zhang, YD ; Gan, WM; Yang, B; Zhao, X; Esling, C; Hofmann, M; Zuo, L. Deformation of Ni-Mn-Ga 7M modulated martensite through detwinning/twinning and forward/reverse intermartensitic transformation studied by in-situ neutron diffraction and interrupted in-situ EBSD. ACTA MATERIALIA, 174 (2019) 319-331.
  25. (WP2-T3)Li, L; Suo, YS; Liu, T; Wang, XJ; Esling, C; Cui, JZ. Effect of a High Magnetic Field on Crystal Growth in the Solidification of Hypoperitectic Zn-Ag Alloy, CRYSTAL GROWTH & DESIGN, 19 (2019) 6448-6462.
  26. (WP2-T4) Hua, K; Zhang, YD; Gan, WM; Kou, HC; Beausir, B; Li, JS; Esling, C. Hot deformation behavior originated from dislocation activity and beta to alpha phase transformation in a metastable beta titanium alloy, INTERNATIONAL JOURNAL OF PLASTICITY, 119 (2019) 200-214.
  27. (WP2-T3)Li, ZB; Esling, C. Multifunctional behaviors in meta-magnetic shape-memory microwires, IUCRJ, 6 (2019) 784-785.
  28. (WP2-T3)Li, L; Suo, YS; Zhang, RX; Ban, CY; Zhang, HT; Liu, T; Esling, C; Cui, JZ. A crystallographic investigation on the growth of Al4Sr crystals under a high magnetic field, JOURNAL OF APPLIED PHYSICS, 125 (2019) 245108 DOI:10.1063/1.5097251
  29. (WP2-T3) Li, L; Zhang, RX; Ban, CY; Zhang, HT; Liu, T; Zhang, H; Wang, XJ; Esling, C; Cui, JZ. Growth behavior of Zn-rich phase in Zn-Mg alloy under a high magnetic field, MATERIALS CHARACTERIZATION 151 (2019) 191-202.
  30. (WP2-T4) Fu, Q; Sha, YH; Zhang, F; Esling, C; Zuo, L. Correlative effect of critical parameters for eta recrystallization texture development in rolled Fe81Ga19 sheet: Modeling and experiment, ACTA MATERIALIA, 167 (2019) 167-180.
  31. (WP2 – T4) P Maurel, L Weiss, P Bocher, E Fleury, T Grosdidier , Erratum:“Oxide dependent wear mechanisms of titanium against a steel counterface: Influence of SMAT nanostructured surface”, [Wear,(2019) 430–431, 245–255], WEAR, (2019) 203087
  32. (WP2 – T4) P Maurel, L Weiss, P Bocher, E Fleury, T Grosdidier, Oxide dependent wear mechanisms of titanium against a steel counterface: Influence of SMAT nanostructured surface, WEAR (2019) 430, 245-255.
  33. (WP2-T4) Laszlo S. Toth, Cai Chen, Arnaud Pougis, Mandana Arzaghi, Jean-Jacques Fundenberger, Roxane Massion, Satyam Suwas, High Pressure Tube Twisting for Producing Ultra Fine Grained Materials: A Review, MATERIALS TRANSACTIONS, (IF=0.8), 60 (2019) 1177-1191.
  34. (WP2-T4) Q. Vu, O. Prokof’eva, L. S. Toth, V. Usov, N. Shkatulyak, Y. Estrin, R. Kulagin, V. Varyukhin, Y. Beygelzimer, Obtaining Hexagon-Shaped Billets of Copper with Gradient Structure by Twist Extrusion, MATERIALS CHARACTERIZATION, (IF=3.2), 2019, https://doi.org/10.1016/j.matchar.2019.04.042
  35. Satyaveer Singh Dhinwal, Laszlo S. Toth, Rimma Lapovok, Peter Damian Hodgson, Tailoring one-pass asymmetric rolling of extra low carbon steel for shear texture and recrystallization, MATERIALS (IF=3.0), (2019) doi:10.3390/ma12121935
  36. (WP3-T2) Thiriet, C. Schneider-Maunoury, P. Laheurte, D. Boisselier and L. Weiss, Multiscale study of different types of interface of a buffer material in powder-based directed energy deposition: Example of Ti6Al4V / Ti6Al4V-Mo / Mo – Inconel 718, ADDITIVE MANUFACTURING, 27 (2019) 118-130.
  37. (WP3-T2) Schneider-Maunoury, L. Weiss, O. Perroud, D. Joguet, D. Boisselier, P. Laheurte: An application of differential injection to fabricate functionally graded Ti-Nb alloys using DED-CLAD® process; JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 268 (2019) 171-180.
  38. Lohmuller, J. Favre, S. Kenzari, B. Piotrowski, L. Peltier, P. Laheurte: Architectural effect on 3D elastic properties and anisotropy of cubic lattice structures: MATERIALS & DESIGN, 182 (2019)
  39. (WP4-T1) Fan, JK, Kou, HC, Zhang, YD, Germain, L, Hua, K, Tang, LY, Esling, C, Li, JS. Formation of slip bands and microstructure evolution of Ti-5Al-5Mo-5V-3Cr-0.5Fe alloy during warm deformation process, JOURNAL OF ALLOYS AND COMPOUNDS 770 (2019) 183-193.
  40. (WP4-T1) Laszlo S. Toth, Viet Q. Vu, Satyaveer Singh Dhinwal, Yajun Zhao, Roxane Massion, Cai Chen, Casey F. Davis, Terry C. Lowe, The Mechanics of High Pressure Shearing with Application to ARMCO® Steel, MATERIALS CHARACTERIZATION, (IF=3.2), 154 (2019) 127-137.
  41. (WP4-T1) Viet Q. Vu, Laszlo S. Toth, Yan Beygelzimer, Roman Kulagin, Modelling of crystallographic texture in Plastic Flow Machining, ADVANCED ENGINEERING MATERIALS, (IF=2.3), (2019) doi:10.1002/adem.201900661.
  42. (WP4-T1) Satyaveer Singh Dhinwal, Laszlo S. Toth, Unlocking deformation path in asymmetric rolling by texture simulation, Materials, (IF=3.0), (2019) DOI:3390/ma13010101.
  43. (WP4-T1)  Arman Hasani, Laszlo S. Toth, Shiwa Mardokh Rouhani, A New Flow Line Function for Modeling Material Trajectory and Textures in Non Equal Channel Angular Pressing, ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (IF=1.37), 2019, Article ID 5682585, https://doi.org/10.1155/2019/5682585.
  44. (WP4-T1) Marat I. Latypov, Laszlo S. Toth, Surya R. Kalidindi, Materials knowledge system for nonlinear composites, COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (IF=4.44), 346 (2019) 180-196.
  45. WP4-T1) A. H. Kobaissy, G. Ayoub, L. S. Toth, S. Mustapha, M. Shehadeh, Continuum Dislocation Dynamics-Based Grain Fragmentation Modeling, INTERNATIONAL JOURNAL OF PLASTICITY (IF=5.5), 114 (2019) 252-271.
  46. (WP4-T1) Song, LH, Wu, BL, Zhang, L, Du, XH, Wang, YN, Esling, C, Philippe, MJ, Detwinning-related Bauschinger effect of an extruded magnesium alloy AZ31B, MATERIALS CHARACTERIZATION, 148 (2019) 63-70.
  47. Gong, MY, Xu, S, Xie, DY, Wang, SJ, Wang, J, Schuman, C, Lecomte, JS. Steps and {11(2)over-bar1} secondary twinning associated with {11(2)over-bar2} twin in titanium, ACTA MATERIALIA, 164 (2019) 776-787.
  48. (WP4-T1) Sudeep K Sahoo, Laszlo S Toth, Somjeet Biswas, An analytical model to predict strain-hardening behaviour and twin volume fraction in a profoundly twinning magnesium alloy, INTERNATIONAL JOURNAL OF PLASTICITY (IF=5.5), 119 (2019) 273–290.
  49. (WP4-T1) Jedidi My, Ben Bettaieb M, Abed-Meraim F, Khabou Mt, Bouguecha A, Haddar [2020] Prediction of necking in HCP sheet metals using a two-surface plasticity model. INTERNATIONAL JOURNAL OF PLASTICITY, (2020) (doi.org/10.1016/j.ijplas.2019.102641)
  50. (WP4-T3) Mikhail Lebyodkin, Tatiana Lebedkina, On the role of hazard and particle failure statistics on the variation of fracture parameters of ductile-brittle composites, METALS 9 (2019) 633(1-15).
  51. (WP4-T3) M.A. Lebyodkin, D.A. Zhemchuzhnikova, T.A. Lebedkina, E.C. Aifantis, Kinematics of formation and cessation of type B deformation bands during the Portevin-Le Chatelier effect in an AlMg alloy, RESULTS IN PHYSICS 12 (2019) 867-86.
  52. (WP4-T3) Allain, S. Y., Roth, A., Bouaziz, O., D’eramo, E. Microstructure-based behavior law for globular pearlitic steels. Journal of Materials Research and Technology, 8 (2019) 3373-3376.
  53. (WP4-T4) Askour, O, Tri, A, Braikat, B, Zahrouni, H, Potier-Ferry, Bifurcation indicator for geometrically nonlinear elasticity using the Method of Fundamental Solutions, COMPTES RENDUS MECANIQUE 34 (2019) 91-100.
  54. (WP4-T4) Huang, Q, Kuang, ZT, Hu, H, Potier-Ferry, M, Multiscale analysis of membrane instability by using the Arlequin method, INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES 162 (2019) 60-75.
  55. (WP4-T4) Fu, C , Wang, T, Xu, F, Huo, Y, Potier-Ferry, M, A modeling and resolution framework for wrinkling in hyperelastic sheets at finite membrane strain, JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS 124 (2019) 446-470.
  56. (WP4-T4) Yang, J, Potier-Ferry, M, Hu, H, Solving the stationary Navier-Stokes equations by using Taylor meshless method, ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS98 (2019) 8-16.
  57. (WP5-T1) Y. Zhao, L. Dezerald, J. Marian “Electronic Structure Calculations of Oxygen Atom Transport Energetics in the Presence of Screw Dislocations in Tungsten” Metals 9, 252 (2019).
  58. (WP5-T1) A. Kraych, E. Clouet, L. Dezerald, L. Ventelon, F. Willaime, D. Rodney “Non-glide effects and dislocation core fields in BCC metals” nature partner journals COMPUTATIONAL MATERIALS (2019) 5:109.
  59. (WP5-T2) Xu, R, Hui, YC, Hu, H, Huang, Q, Zahrouni, H, Ben Zineb, T, Potier-Ferry, M. A Fourier-related FE2 multiscale model for instability phenomena of long fiber reinforced materials, COMPOSITE STRUCTURES, 211 (2019) 530-539.
  60. (WP5-T3) S. Gupta, V. Taupin, C. Fressengeas, J Chevy, “Crystal plasticity modeling of the effects of crystal orientation and grain-to-grain interactions on DSA-induced strain localization in Al–Li alloys”, MATERIALIA 8 (2019) 100467.
  61. (WP5-T4) T. Richeton, Mechanical derivation of elastic constants of ε-martensite,SCRIPTA MATERIALIA 169 (2019) 14-18.
  62. (WP5-T5) M. Torabi Rad, M. Založnik, H. Combeau, C. Beckermann, Upscaling mesoscopic simulation results to develop constitutive relations for macroscopic modeling of equiaxed dendritic solidification, MATERIALIA 5 (2019) 100231. doi:10.1016/j.mtla.2019.100231.
  63. Olmedilla, M. Založnik, H. Combeau, Quantitative 3D mesoscopic modeling of grain interactions during equiaxed dendritic solidification in a thin sample, ACTA MATERIALIA 173 (2019) 249–261. doi:10.1016/j.actamat.2019.05.019.

2019

  1. (WP1-T1) de Formanoir, C, Martin, G, Prima, F, Allain, SYP, Dessolier, T, Sun, F, Vives, S, Hary, B, Brechet, Y, Godet, S. Micromechanical behavior and thermal stability of a dual-phase alpha plus alpha ‘ titanium alloy produced by additive manufacturing, ACTA MATERIALIA 162 (2019) 149-162.
  2. Koutoati, Kouami, Mohri, Foudil, Daya, El Mostafa, Finite element approach of axial bending coupling on static and vibration behaviors of functionally graded material sandwich beams, MECHANICS OF ADVANCED MATERIALS AND STRUCTURES (2019) DOI: 10.1080/15376494.2019.1685144
  3. Bouaziz, An original unified approach for the description of phase transformations in steel during cooling: first application to binary Fe–C, Metall. Res. Technol. 116, 615 (2019)
  4. (WP1-T4) Adrien Létoffé, Sandrine Hoppe, Richard Laine, Nadia Canilho, Andreea Pasc, Didier Rouxel, Rafael J Jiménez Riobóo, Sebastien Hupont, Isabelle Royaud, Marc Ponçot, Resilience improvement of an isotactic polypropylene-g-maleic anhydride by crosslinking using polyether triamine agents, POLYMER, 179, 121655 (2019).
  5. Hamaidia Achref, Mohri Foudil, Bouzerira Cherif, Higher buckling and lateral buckling strength of unrestrained and braced thin-walled beams: Analytical, numerical and design approach applications. JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH 155 (2019) 1–19.
  6. M Soltani, B Asgarian, F Mohri, Improved finite element model for lateral stability analysis of axially functionally graded non-prismatic I-beams, INTERNATIONAL JOURNAL OF STRUCTURAL STABILITY AND DYNAMICS. 19(09), 1950108. https://doi.org/10.1142/S0219455419501086.
  7. Ntomprougkidis, V., Martin, J., Nomine, A., Henrion, G., Sequential run of the PEO process with various pulsed bipolar, SURFACE & COATINGS TECHNOLOGY, 374 (2019) 713-724, DOI: 10.1016/j.surfcoat.2019.06.05
  8. (WP1-T1) Czerwiec, A. Andrieux, G. Marcos, H. Michel, Ph Bauer, Is “expanded austenite” really a solid solution? Mössbauer observation of an annealed AISI 316L nitrided sample, Journal of Alloys and Compounds 811 (2019) 151972
  9. (WP2-T2) Mansour, M.A. Crimp, N. Gey, X. Iltis, N. Maloufi, Dislocation analysis of a complex sub-grain boundary in UO2 ceramic using accurate electron channelling contrast imaging in a scanning electron microscope, CERAMICS INTERNATIONAL, DOI:doi.org/10.1016/j.ceramint.2019.06.091, (2019)
  10. (WP1-T2) Yi Chen, Hongchao Kou, Liang Cheng, Ke Hua, Lingyan Sun, Yalin Lu, Emmanuel Bouzy, Crystallography of phase transformation during quenching from β phase field of a V-rich TiAl alloy, JOURNAL OF MATERIALS SCIENCE (IF=2.99), 54 (2019) 1844-1856.
  11. (WP2-T2) Germain, N. Gey, M. Humbert, Reconstruction of deformed parent grains from microstructure inherited by phase transformations, SCRIPTA MATERIALIA, 158 (2019) 91-94.
  12. (WP1 – T3) J Martin, AV Nominé, J Stef, A Nominé, JX Zou, G Henrion, T Grosdidier, The influence of metallurgical state of substrate on the efficiency of plasma electrolytic oxidation (PEO) process on magnesium alloy, MATERIALS & DESIGN, 179, (2019), 107859
  13. (WP2-T1) Olmedilla, M. Založnik, T. Messmer, B. Rouat, H. Combeau, Packing dynamics of spherical and non-convex grains sedimenting at low Stokes number, PHYSICAL REVIEW E 99 (2019) 012907. doi:10.1103/PhysRevE.99.012907.
  14. (WP1-T3) Martin, A. Nominé, V. Ntomprougkidis, S. Migot, S. Bruyère, F. Soldera, T. Belmonte, G. Henrion, Formation of a metastable nanostructured mullite during Plasma Electrolytic Oxidation of aluminium in “soft” regime condition., MATERIALS AND DESIGN 180 (2019) 107977 (14 p.)
    https://doi.org/10.1016/j.matdes.2019.107977
  15. (WP1) Ntomprougkidis, J. Martin, A. Nominé, G. Henrion, Sequential run of the PEO process with various current waveforms as a way to improve the process energy efficiency, SURF. COAT. TECHNOL. 374 (2019) 713-724
    https://doi.org/10.1016/j.surfcoat.2019.06.057
  16. (WP1-T4) Létoffé, S.G. Rodríguez, S. Hoppe, N. Canilho, O. Godard, A. Pasc, I. Royaud, M. Ponçot, Switching from brittle to ductile isotactic polypropylene-g-maleic anhydride with capped-end polyetherdiamine as chains crosslinking agent. POLYMER, 164, 67–78, (2019).
  17. (WP1-T4) L Weiss, Y Nessler, M Novelli, P Laheurte, T Grosdidier, On the Use of Functionally Graded Materials to Differentiate the Effects of Surface Severe Plastic Deformation, Roughness and Chemical Composition on Cell Proliferation, Metals 9 (12), 1344, 2019.
  18. (WP1-T4) T Grosdidier, M Novelli, Recent Developments in the Application of Surface Mechanical Attrition Treatments for Improved Gradient Structures: Processing Parameters and Surface Reactivity, MATERIALS TRANSACTIONS 60 (7), 1344-1355, 2019
  19. Kriaa, A. Guitton, N. Maloufi, Modeling dislocation contrasts obtained by accurate-Electron Channeling Contrast Imaging for characterizing deformation mechanisms in bulk materials. MATERIALS, 2019, 12 (10), 1587 DOI: 10.3390/ma12101587 ⟨hal-02392249⟩
  20. Ben Haj Slama, N. Maloufi, J. Guyon, S. Bahi, L. Weiss, A. Guitton, In situ macroscopic tensile testing in SEM and Electron Channeling Contrast Imaging: pencil glide evidenced in a bulk beta-Ti21S polycrystal. MATERIALS, 2019, 12 (15), 2479, DOI: 10.3390/ma12152479 ⟨hal-02392248⟩
  21. (WP1 – T5) J Huot, F Cuevas, S Deledda, K Edalati, Y Filinchuk, T Grosdidier, et al., Mechanochemistry of metal hydrides: recent advances, MATERIALS 12, (2019) 2778.
  22. (WP2-T2) Pakanati, K.O. Tveito, M. M’Hamdi, H. Combeau, M. Založnik, Application of an Equiaxed Grain Growth and Transport Model to Study Macrosegregation in a DC Casting Experiment, METALLURGICAL AND MATERIALS TRANSACTIONS A 50 (2019) 1773–1786. doi:10.1007/s11661-019-05133-z.
  23. Moreno, M., Teixeira, J., Ghanbaja, J., Bonnet, F., Allain, S. Evolution of cementite composition along the processing of cold-rolled and annealed Dual-Phase steels. MATERIALIA, 6, (2019) 100179.
  24. Moreno, M., Teixeira, , Geandier, G., Hell, J. C., Bonnet, F., Salib, M., Allain, S. Real-Time Investigation of Recovery, Recrystallization and Austenite Transformation during Annealing of a Cold-Rolled Steel Using High Energy X-ray Diffraction (HEXRD). METALS, 9 (2019).
  25. Gouné, M., Aoued, S., Danoix, F., Geandier, G., Poulon-Quintin, A., Hell, J. C., Allain, S. Y. P. Alloying-element interactions with austenite/martensite interface during quenching and partitioning of a model Fe-C-Mn-Si alloy. SCRIPTA MATERIALIA, 162, (2019) 181-184.
  26. Santajuana, M. A., Eres-Castellanos, A., Ruiz-Jimenez, V., Allain, S., Geandier, G., Caballero, F. G., Garcia-Mateo, C. Quantitative Assessment of the Time to End Bainitic Transformation. METALS, 9 (2019) 925.
  27. (WP2-T3) Li, Dong, Li, Zongbin, Yang, Jiajing, Li, Zhenzhuang, Yang, Bo, Yan, Haile, Wang, Dunhui, Hou, Long, Li, Xi, Zhang, Yudong, Esling, Claude, Zhao, Xiang, Zuo, Liang, Large elastocaloric effect driven by stress-induced two-step structural transformation in a directionally solidified Ni55Mn18Ga27 alloy, SCRIPTA MATERIALIA, 163 (2019) 116-120.
  28. (WP2-T3) Li, ZZ, Li, ZB, Yang, JJ, Li, D, Yang, B, Yan, HL, Nie, ZH, Hou, L
    Li, X, Zhang, YD, Esling, C, Zhao, X, Zuo, Large elastocaloric effect in a polycrystalline Ni45.7Co4.2Mn37.3Sb12.8 alloy with low transformation strain, SCRIPTA MATERIALIA, 162 (2019) 486-491.
  29. (WP2-T3) Bao, L, Le, QC, Zhang, ZQ, Esling, C. A novel degradation rate controlling mechanism of biocompatible Mg-Zn-Y-Zr alloys, MATERIALS LETTERS 235 (2019) 189-192.
  30. (WP2-T3) Li, ZB, Dong, SY, Li, ZZ, Yang, B, Liu, F, Sanchez-Valdes, CF, Llamazares, JLS, Zhang, YD, Esling, C, Zhao, X, Zuo, L. Giant low-field magnetocaloric effect in Si alloyed Ni-Co-Mn-In alloys, SCRIPTA MATERIALIA 159 (2019) 113-118.
  31. (WP2-T3) Li, ZB ; Yang, B ; Zhang, YD; Esling, C; Zhao, X; Zuo, L. Crystallographic insights into diamond-shaped 7M martensite in Ni-Mn-Ga ferromagnetic shape-memory alloys, IUCRJ, 6 (2019) 909-920.
  32. (WP2-T3) Zou, NF; Li, ZB ; Zhang, YD ; Gan, WM; Yang, B; Zhao, X; Esling, C; Hofmann, M; Zuo, L. Deformation of Ni-Mn-Ga 7M modulated martensite through detwinning/twinning and forward/reverse intermartensitic transformation studied by in-situ neutron diffraction and interrupted in-situ EBSD. ACTA MATERIALIA, 174 (2019) 319-331.
  33. (WP2-T3)Li, L; Suo, YS; Liu, T; Wang, XJ; Esling, C; Cui, JZ. Effect of a High Magnetic Field on Crystal Growth in the Solidification of Hypoperitectic Zn-Ag Alloy, CRYSTAL GROWTH & DESIGN, 19 (2019) 6448-6462.
  34. (WP2-T4) Hua, K; Zhang, YD; Gan, WM; Kou, HC; Beausir, B; Li, JS; Esling, C. Hot deformation behavior originated from dislocation activity and beta to alpha phase transformation in a metastable beta titanium alloy, INTERNATIONAL JOURNAL OF PLSTICITY, 119 (2019) 200-214.
  35. (WP2-T4) JO Fadonougbo, JY Jung, JY Suh, YS Lee, JH Shim, E Fleury, YW Cho, The role of Fe particle size and oxide distribution on the hydrogenation properties of ball-milled nano-crystalline powder mixtures of Fe and Mg, JOURNAL OF ALLOYS AND COMPOUNDS 806 (2019) 1039-1046
  36. (WP2-T3)Li, ZB; Esling, C. Multifunctional behaviors in meta-magnetic shape-memory microwires, IUCRJ, 6 (2019) 784-785.
  37. (WP2-T3)Li, L; Suo, YS; Zhang, RX; Ban, CY; Zhang, HT; Liu, T; Esling, C; Cui, JZ. A crystallographic investigation on the growth of Al4Sr crystals under a high magnetic field, JOURNAL OF APPLIED PHYSICS, 125 (2019) 245108 DOI:10.1063/1.5097251
  38. (WP2-T3) Li, L; Zhang, RX; Ban, CY; Zhang, HT; Liu, T; Zhang, H; Wang, XJ; Esling, C; Cui, JZ. Growth behavior of Zn-rich phase in Zn-Mg alloy under a high magnetic field, MATERIALS CHARACTERIZATION 151 (2019) 191-202.
  39. (WP2-T4) Fu, Q; Sha, YH; Zhang, F; Esling, C; Zuo, L. Correlative effect of critical parameters for eta recrystallization texture development in rolled Fe81Ga19 sheet: Modeling and experiment, ACTA MATERIALIA, 167 (2019) 167-180.
  40. (WP2 – T4) P Maurel, L Weiss, P Bocher, E Fleury, T Grosdidier , Erratum:“Oxide dependent wear mechanisms of titanium against a steel counterface: Influence of SMAT nanostructured surface”, [Wear,(2019) 430–431, 245–255], WEAR, (2019) 203087
  41. (WP2 – T4) P Maurel, L Weiss, P Bocher, E Fleury, T Grosdidier, Oxide dependent wear mechanisms of titanium against a steel counterface: Influence of SMAT nanostructured surface, WEAR (2019) 430, 245-255.
  42. (WP2-T4) Laszlo S. Toth, Cai Chen, Arnaud Pougis, Mandana Arzaghi, Jean-Jacques Fundenberger, Roxane Massion, Satyam Suwas, High Pressure Tube Twisting for Producing Ultra Fine Grained Materials: A Review, MATERIALS TRANSACTIONS, (IF=0.8), 60 (2019) 1177-1191.
  43. (WP2-T4) Q. Vu, O. Prokof’eva, L. S. Toth, V. Usov, N. Shkatulyak, Y. Estrin, R. Kulagin, V. Varyukhin, Y. Beygelzimer, Obtaining Hexagon-Shaped Billets of Copper with Gradient Structure by Twist Extrusion, MATERIALS CHARACTERIZATION, (IF=3.2), 2019, https://doi.org/10.1016/j.matchar.2019.04.042
  44. (WP2-T4) Satyaveer Singh Dhinwal, Laszlo S. Toth, Rimma Lapovok, Peter Damian Hodgson, Tailoring one-pass asymmetric rolling of extra low carbon steel for shear texture and recrystallization, MATERIALS (IF=3.0), (2019) doi:10.3390/ma12121935
  45. (WP3-T1) E. Castro-Cedeno, Jardy, B. Boissière, J. Lehmann, P. Gardin, A. Carré, S. Gérardin and J.P. Bellot, Numerical simulation of modification of non-metallic inclusions by calcium treatment in the argon-stirred ladle, METALLURGICAL RESEARCH AND TECHNOLOGY, (2019), Special Issue on Inclusion Cleanliness, 116, 5, doi:10.1051/metal/2018131.
  46. (WP3-T1) M. Gisselbrecht, S. Kroll-Rabotin and J.P. Bellot, Aggregation kernel of globular inclusions in local shear flow: application to aggregation in a gas-stirred ladle, METALLURGICAL RESEARCH AND TECHNOLOGY, (2019), Special Issue on Inclusion Cleanliness, 116, 5, doi:10.1051/metal/2019006.
  47. (WP3-T1) R. Bhar, J. Jourdan, V. Descotes and Jardy, An experimental study of the inclusion behavior during maraging steel processing, METALLURGICAL RESEARCH AND TECHNOLOGY, (2019), Special Issue on Inclusion Cleanliness, 116, 5, doi:10.1051/metal/2019028.
  48. (WP3-T1) P.O. Delzant, Chapelle, A. Jardy, J. Jourdan, J. Jourdan and Y. Millet, Investigation of arc dynamics during vacuum arc remelting of a Ti64 alloy using a photodiode based instrumentation, Journal of Materials Processing Technology 266 (2019) 10-18.
  49. (WP3-T2) N. Kanari, E. Ostrosi, C. Diliberto, I. Filippova, S. Shallari, E. Allain, F. Diot, Patisson and J. Yvon, Green process for industrial waste transformation into super-oxidizing materials named alkali metal ferrates (VI), MATERIALS, (2019) doi:10.3390/ma12121977.
  50. (WP3-T2) N. Kanari, E. Allain, S. Shallari, F. Diot, S. Diliberto, Patisson and J. Yvon, Thermochemical route for extraction and recycling of critical, strategic and high value elements from by-products and end-of-life materials. Part I: treatment of a copper by-product in air atmosphere, MATERIALS, (2019) doi:10.3390/ma12101625.
  51. (WP3-T2) H. Anselmi, Mirgaux, R. Bounaceur and F. Patisson, Simulation of post-combustion CO2 capture, a comparison among absorption, adsorption and membranes, CHEMICAL ENGINEERING TECHNOLOGY 42 (4) (2019) 797-804.
  52. (WP3-T3) Thiriet, C. Schneider-Maunoury, P. Laheurte, D. Boisselier and L. Weiss, Multiscale study of different types of interface of a buffer material in powder-based directed energy deposition: Example of Ti6Al4V / Ti6Al4V-Mo / Mo – Inconel 718, ADDITIVE MANUFACTURING, 27 (2019) 118-130.
  53. (WP3-T3) Schneider-Maunoury, L. Weiss, O. Perroud, D. Joguet, D. Boisselier, P. Laheurte: An application of differential injection to fabricate functionally graded Ti-Nb alloys using DED-CLAD® process; JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 268 (2019) 171-180.
  54. Lohmuller, J. Favre, S. Kenzari, B. Piotrowski, L. Peltier, P. Laheurte: Architectural effect on 3D elastic properties and anisotropy of cubic lattice structures: MATERIALS & DESIGN, 182 (2019)
  55. (WP4-T1) Fan, JK, Kou, HC, Zhang, YD, Germain, L, Hua, K, Tang, LY, Esling, C, Li, JS. Formation of slip bands and microstructure evolution of Ti-5Al-5Mo-5V-3Cr-0.5Fe alloy during warm deformation process, JOURNAL OF ALLOYS AND COMPOUNDS 770 (2019) 183-193.
  56. (WP4-T1) Laszlo S. Toth, Viet Q. Vu, Satyaveer Singh Dhinwal, Yajun Zhao, Roxane Massion, Cai Chen, Casey F. Davis, Terry C. Lowe, The Mechanics of High Pressure Shearing with Application to ARMCO® Steel, MATERIALS CHARACTERIZATION, (IF=3.2), 154 (2019) 127-137.
  57. (WP4-T1) Satyaveer Singh Dhinwal, Laszlo S. Toth, Unlocking deformation path in asymmetric rolling by texture simulation, Materials, (IF=3.0), 13 (2020) 101,   DOI:3390/ma13010101.
  58. (WP4-T1)  Arman Hasani, Laszlo S. Toth, Shiwa Mardokh Rouhani, A New Flow Line Function for Modeling Material Trajectory and Textures in Non Equal Channel Angular Pressing, ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (IF=1.37), 2019, Article ID 5682585, https://doi.org/10.1155/2019/5682585.
  59. (WP4-T1) Marat I. Latypov, Laszlo S. Toth, Surya R. Kalidindi, Materials knowledge system for nonlinear composites, COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (IF=4.44), 346 (2019) 180-196.
  60. (WP4-T1) A. H. Kobaissy, G. Ayoub, L. S. Toth, S. Mustapha, M. Shehadeh, Continuum Dislocation Dynamics-Based Grain Fragmentation Modeling, INTERNATIONAL JOURNAL OF PLASTICITY (IF=5.5), 114 (2019) 252-271.
  61. (WP4-T1) Song, LH, Wu, BL, Zhang, L, Du, XH, Wang, YN, Esling, C, Philippe, MJ, Detwinning-related Bauschinger effect of an extruded magnesium alloy AZ31B, MATERIALS CHARACTERIZATION, 148 (2019) 63-70.
  62. Gong, MY, Xu, S, Xie, DY, Wang, SJ, Wang, J, Schuman, C, Lecomte, JS. Steps and {11(2)over-bar1} secondary twinning associated with {11(2)over-bar2} twin in titanium, ACTA MATERIALIA, 164 (2019) 776-787. 63.
  63. (WP4-T1) Sudeep K Sahoo, Laszlo S Toth, Somjeet Biswas, An analytical model to predict strain-hardening behaviour and twin volume fraction in a profoundly twinning magnesium alloy, INTERNATIONAL JOURNAL OF PLASTICITY (IF=5.5), 119 (2019) 273–290.
  64. (WP4-T3) Mikhail Lebyodkin, Tatiana Lebedkina, On the role of hazard and particle failure statistics on the variation of fracture parameters of ductile-brittle composites, METALS 9 (2019) 633(1-15).
  65. (WP4-T3) M.A. Lebyodkin, D.A. Zhemchuzhnikova, T.A. Lebedkina, E.C. Aifantis, Kinematics of formation and cessation of type B deformation bands during the Portevin-Le Chatelier effect in an AlMg alloy, RESULTS IN PHYSICS 12 (2019) 867-86.
  66. (WP4-T3) Allain, S. Y., Roth, A., Bouaziz, O., D’eramo, E. Microstructure-based behavior law for globular pearlitic steels. Journal of Materials Research and Technology, 8 (2019) 3373-3376.
  67. (WP4-T4) Askour, O, Tri, A, Braikat, B, Zahrouni, H, Potier-Ferry, Bifurcation indicator for geometrically nonlinear elasticity using the Method of Fundamental Solutions, COMPTES RENDUS MECANIQUE 34 (2019) 91-100.
  68. (WP4-T4) Huang, Q, Kuang, ZT, Hu, H, Potier-Ferry, M, Multiscale analysis of membrane instability by using the Arlequin method, INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES 162 (2019) 60-75.
  69. (WP4-T4) Fu, C , Wang, T, Xu, F, Huo, Y, Potier-Ferry, M, A modeling and resolution framework for wrinkling in hyperelastic sheets at finite membrane strain, JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS 124 (2019) 446-470.
  70. (WP4-T4) Yang, J, Potier-Ferry, M, Hu, H, Solving the stationary Navier-Stokes equations by using Taylor meshless method, ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS98 (2019) 8-16.
  71. (WP5-T1) Y. Zhao, L. Dezerald, J. Marian “Electronic Structure Calculations of Oxygen Atom Transport Energetics in the Presence of Screw Dislocations in Tungsten” Metals 9, 252 (2019).
  72. (WP5-T1) A. Kraych, E. Clouet, L. Dezerald, L. Ventelon, F. Willaime, D. Rodney “Non-glide effects and dislocation core fields in BCC metals” nature partner journals COMPUTATIONAL MATERIALS (2019) 5:109.
  73. (WP5-T2) Xu, R, Hui, YC, Hu, H, Huang, Q, Zahrouni, H, Ben Zineb, T, Potier-Ferry, M. A Fourier-related FE2 multiscale model for instability phenomena of long fiber reinforced materials, COMPOSITE STRUCTURES, 211 (2019) 530-539.
  74. (WP5-T3) S. Gupta, V. Taupin, C. Fressengeas, J Chevy, “Crystal plasticity modeling of the effects of crystal orientation and grain-to-grain interactions on DSA-induced strain localization in Al–Li alloys”, MATERIALIA 8 (2019) 100467. DOI: 10.1016/j.mtla.2019.100467. Réf. HAL: hal-02351519.
  75. (WP5-T3) Stéphane Berbenni, Vincent Taupin (2019). Fast Fourier transform-based micromechanics of interfacial line defects in crystalline materials. Journal of Micromechanics and Molecular Physics, 03(03n04): 1840007. DOI: 10.1142/S2424913018400076. Réf. HAL: hal-02351498.
  76. (WP5-T4) T. Richeton, Mechanical derivation of elastic constants of ε-martensite SCRIPTA MATERIALIA 169 (2019) 14-18.
  77. (WP5-T5) M. Torabi Rad, M. Založnik, H. Combeau, C. Beckermann, Upscaling mesoscopic simulation results to develop constitutive relations for macroscopic modeling of equiaxed dendritic solidification, MATERIALIA 5 (2019) 100231. doi:10.1016/j.mtla.2019.100231
  78. Olmedilla, M. Založnik, H. Combeau, Quantitative 3D mesoscopic modeling of grain interactions during equiaxed dendritic solidification in a thin sample, ACTA MATERIALIA 173 (2019) 249–261. doi:10.1016/j.actamat.2019.05.019.

2018

Special Issue, dedicated to the LabEx DAMAS in MATERIALS (IF=3.0):

Guest Editors: Laszlo S. Toth, Sabine Denis

Internet site: http://www.mdpi.com/journal/materials/special_issues/design_of_alloy_metals_for_low_mass_structures. 

  1. Toth, L.; Skrotzki, W.; Zhao, Y.; Pukenas, A.; Braun, C.; Birringer, R. Revealing Grain Boundary Sliding from Textures of a Deformed Nanocrystalline Pd-Au Alloy. MATERIALS 2018, 11(2), 190; https://doi.org/10.3390/ma11020190.
  2. Guitton, A.; Kriaa, H.; Bouzy, E.; Guyon, J.; Maloufi, N. A Dislocation-Scale Characterization of the Evolution of Deformation Microstructures around Nanoindentation Imprints in a TiAl Alloy. MATERIALS 2018, 11(2), 305; https://doi.org/10.3390/ma11020305.
  3. Gupta, S.; Taupin, V.; Fressengeas, C.; Jrad, M. Geometrically Nonlinear Field Fracture Mechanics and Crack Nucleation, Application to Strain Localization Fields in Al-Cu-Li Aerospace Alloys. MATERIALS 2018, 11(4), 498; https://doi.org/10.3390/ma11040498.
  4. Kennedy, J.; Rouat, B.; Daloz, D.; Bouzy, E.; Zollinger, J. Effect of Inoculant Alloy Selection and Particle Size on Efficiency of Isomorphic Inoculation of Ti-Al. MATERIALS 2018, 11(5), 666; https://doi.org/10.3390/ma11050666.
  5. Toth, L.; Haase, C.; Allen, R.; Lapovok, R.; Molodov, D.; Cherkaoui, M.; Kadiri, H. Modeling the Effect of Primary and Secondary Twinning on Texture Evolution during Severe Plastic Deformation of a Twinning-Induced Plasticity Steel. MATERIALS 2018, 11(5), 863; https://doi.org/10.3390/ma11050863.
  6. Gennesson, M.; Zollinger, J.; Daloz, D.; Rouat, B.; Demurger, J.; Combeau, H. Three Dimensional Methodology to Characterize Large Dendritic Equiaxed Grains in Industrial Steel Ingots. MATERIALS 2018, 11(6), 1007; https://doi.org/10.3390/ma11061007.
  7. Lebyodkin, M.; Amouzou, K.; Lebedkina, T.; Richeton, T.; Roth, A. Complexity and Anisotropy of Plastic Flow of a-Ti Probed by Acoustic Emission and Local Extensometry. MATERIALS 2018, 11(7), 1061; https://doi.org/10.3390/ma11071061.
  8. Allain, S.; Aoued, S.; Quintin-Poulon, A.; Goune, M.; Danoix, F.; Hell, J.; Bouzat, M.; Soler, M.; Geandier, G. In Situ Investigation of the Iron Carbide Precipitation Process in a Fe-C-Mn-Si Q&P Steel. MATERIALS 2018, 11(7), 1087; https://doi.org/10.3390/ma11071087.
  9. Richeton, T.; Wagner, F.; Chen, C.; Toth, L. Combined Effects of Texture and Grain Size Distribution on the Tensile Behavior of a-Titanium. MATERIALS 2018, 11(7), 1088; https://doi.org/10.3390/ma11071088.
  10. Bechara, R.; Hamadeh, H.; Mirgaux, O.; Patisson, F. Optimization of the Iron Ore Direct Reduction Process through Multiscale Process Modeling. MATERIALS 2018, 11(7), 1094; https://doi.org/10.3390/ma11071094.
  11. Lohmuller, P.; Favre, J.; Piotrowski, B.; Kenzari, S.; Laheurte, P. Stress Concentration and Mechanical Strength of Cubic Lattice Architectures. MATERIALS 2018, 11(7), 1146; https://doi.org/10.3390/ma11071146.
  12. Bellot, J.; Kroll-Rabotin, J.; Gisselbrecht, M.; Joishi, M.; Saxena, A.; Sanders, S.; Jardy, A. Toward Better Control of Inclusion Cleanliness in a Gas Stirred Ladle Using Multiscale Numerical Modeling. MATERIALS 2018, 11(7), 1179; https://doi.org/10.3390/ma11071179.
  13. Vu, V.; Beygelzimer, Y.; Kulagin, R.; Toth, L. Mechanical Modelling of the Plastic Flow Machining Process. MATERIALS 2018, 11(7), 1218; https://doi.org/10.3390/ma11071218.
  14. Lhadi, S.; Chini, M.; Richeton, T.; Gey, N.; Germain, L.; Berbenni, S. Micromechanical Modeling of the Elasto-Viscoplastic Behavior and Incompatibility Stresses of b-Ti Alloys. MATERIALS 2018, 11(7), 1227; https://doi.org/10.3390/ma11071227.
  15. Billotte, T.; Daloz, D.; Rouat, B.; Tirand, G.; Kennedy, J.; Robin, V.; Zollinger, J. Microsegregation Model Including Convection and Tip Undercooling: Application to Directional Solidification and Welding. MATERIALS 2018, 11(7), 1252; https://doi.org/10.3390/ma11071252.
  16. Dhinwal, S.; Toth, L.; Hodgson, P.; Haldar, A. Effects of Processing Conditions on Texture and Microstructure Evolution in Extra-Low Carbon Steel during Multi-Pass Asymmetric Rolling. MATERIALS 2018, 11(8), 1327; https://doi.org/10.3390/ma11081327.
  17. Panda, S.; Toth, L.; Zou, J.; Grosdidier, T. Effect of Strain Heterogeneities on Microstructure, Texture, Hardness, and H-Activation of High-Pressure Torsion Mg Consolidated from Different Powders. MATERIALS 2018, 11(8), 1335; https://doi.org/10.3390/ma11081335.
  18. Lohmuller, P.; Peltier, L.; Hazotte, A.; Zollinger, J.; Laheurte, P.; Fleury, E. Variations of the Elastic Properties of the CoCrFeMnNi High Entropy Alloy Deformed by Groove Cold Rolling. MATERIALS 2018, 11(8), 1337; https://doi.org/10.3390/ma11081337.
  19. Ben Bettaieb, M.; Abed-Meraim, F. Influence of the Non-Schmid Effects on the Ductility Limit of Polycrystalline Sheet Metals. MATERIALS 2018, 11(8), 1386; https://doi.org/10.3390/ma11081386.
  20. Van Landeghem, H.; Danoix, R.; Goune, M.; Bordere, S.; Martinavicius, A.; Jessner, P.; Epicier, T.; Hannoyer, B.; Danoix, F.; Redjaimia, A. Contribution of Local Analysis Techniques for the Characterization of Iron and Alloying Elements in Nitrides: Consequences on the Precipitation Process in Fe-Si and Fe-Cr Nitrided Alloys. MATERIALS 2018, 11(8), 1409; https://doi.org/10.3390/ma11081409.
  21. Geandier, G.; Vautrot, L.; Denand, B.; Denis, S. In Situ Stress Tensor Determination during Phase Transformation of a Metal Matrix Composite by High-Energy X-ray Diffraction. MATERIALS 2018, 11(8), 1415; https://doi.org/10.3390/ma11081415.
  22. Schenk, T.; Trehorel, R.; Dirand, L.; Jacques, A. Dislocation Densities and Velocities within the g Channels of an SX Superalloy during In Situ High-Temperature Creep Tests. MATERIALS 2018, 11(9), 1527; https://doi.org/10.3390/ma11091527.
  23. Komlavi Senyo Eloh, Alain Jacques, Gabor Ribarik, Stéphane Berbenni, The Effect of Crystal Defects on 3D High-Resolution Diffraction Peaks: A FFT-Based Method, MATERIALS 2018, 11, 1669; doi:10.3390/ma11091669
  24. Hamadeh, O. Mirgaux, F. Patisson, Detailed modeling of the direct reduction of iron ore in a shaft furnace, MATERIALS 2018, 11(10), 1865;  https://doi.org/10.3390/ma11101865
  25. Robert M. Allen, Laszlo S. Toth, Andrew L. Oppedal and Haitham El Kadiri, Crystal Plasticity Modeling of Anisotropic Hardening and Texture Due to Dislocation Transmutation in Twinning, MATERIALS 2018, 11(10), 1855; https://doi.org/10.3390/ma11101855 
  26. Meriem Ben Haj Slama, Nathalie Gey, Lionel Germain, Kangying Zhu , Sébastien Allain, Key Parameters to Promote Granularization of Lath-Like Bainite/Martensite in FeNiC Alloys during Isothermal Holding, MATERIALS 2018, 11(10), 1808; https://doi.org/10.3390/ma11101808
  27. Rui Xu, Céline Bouby, Hamid Zahrouni, Tarak Ben Zineb, Heng Hu, Michel Potier-Ferry, A Multiscale Analysis on the Superelasticity Behavior of Architected Shape Memory Alloy Materials, MATERIALS 2018, 11(9), 1746; https://doi.org/10.3390/ma11091746  

2018, WP1:

  1. (WP1-T1) P. Van Landeghem, M. Véron, S.D. Catteau, J. Teixeira, J. Dulcy, A. Redjaïmia, S. Denis, Nitrogen-induced nanotwinning of bainitic ferrite in low-alloy steel, SCRIPTA MATERIALIA, 155 (2018) 63–67.
  2. (WP1-T1) Scott, CP, Amirkhiz, BS, Pushkareva, I, Fazeli, F, Allain, SYP, Azizi, H, New insights into martensite strength and the damage behaviour of dual phase steels, ACTA MATERIALIA 159 (2018) 112-122.
  3. (WP1-T1) Novelli, P. Bocher, T. Grosdidier, Effect of cryogenic temperatures and processing parameters on gradient-structure of a stainless steel treated by ultrasonic surface mehanical attrition treatment, MATERIALS CHARACTERIZATION 139 (2018) 197-207.
  4. (WP1-T2) R. Kennedy, D. Daloz, B. Rouat, E. Bouzy, J. Zollinger, Grain refinement of TiAl alloys by isomorphic self-inoculation, INTERMETALLICS 95 (2018) 89-93.
  5. (WP1-T2) Yi Chen, Liang Cheng, Lingyan Sun, Yalin Lu, Guang Yang, Hongchao Kou, Emmanuel Bouzy, Characterization of a New Microstructure in a beta-Solidifying TiAl Alloy after Air-Cooling from a beta Phase Field and Subsequent Tempering, METALS 8 (2018) 156.
  6. (WP1-T2) Nejezchlebova, H. Seiner, P. Sedlak, M. Landa, Jana Smilauerova, E. Aeby-Gautier, B. Denand, M. Dehmas, B. Appolaire, On the complementarity between resistivity measurement and ultrasonic measurement for in-situ characterization of phase transitions in Ti-alloys, JOURNAL OF ALLOYS AND COMPOUNDS 762 (2018) 868-872.
  7. (WP1-T2) Guitton, H. Kriaa, E. Bouzy, J. Guyon, N. Maloufi, A Dislocation-Scale Characterization of the Evolution of Deformation Microstructures around Nanoindentation Imprints in a TiAl Alloy, MATERIALS 11 (2018) 305.
  8. (WP1-T2) Zollinger, J.; Escot, M.; Deillon, L.; Rouat, B.; Daloz, D.; Dupuy, T., Interface microstructure formation of dissimilar Fe/Fe-Mn-C steel RSW joints, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 252 (2018) 697-704.
  9. (WP1-T2) Brodu, E. Bouzy, A New and Unexpected Spatial Relationship Between Interaction Volume and Diffraction Pattern in Electron Microscopy in Transmission, MICROSCOPY AND MICROANALYSIS, 24 (2018) 634-646.
  10. (WP1-T2) Brodu, E. Bouzy, J.-J. Fundenberger, B. Beausir, L. Laffont, J. Lacaze, Crystallography of Growth Blocks in Spheroidal Graphite, MATERIALS SCIENCE FORUM 925 (2018) 54-61.
  11. (WP1-T3) Liu, Xiaorui; Beausir, Benoit; Zhang, Yudong; Gan, Weimin; Yuan, Hui; Yu, Fuxiao; Esling, Claude; Zhao, Xiang; Zuo, Liang, Heat-treatment induced defect formation in alpha-Al matrix in Sr-modified eutectic Al-Si alloy, JOURNAL OF ALLOYS AND COMPOUNDS, 730 (2018) 208-218.
  12. (WP1-T4) Kpeky, F. Abed-Meraim F, E.M. Daya, O.D. Samah, Modeling of hybrid vibration control for multilayer structures using solid-shell finite elements, MECHANICS OF ADVANCED MATERIALS AND STRUCTURES, 25 (2018) 1033-1046 (DOI: 10.1080/15376494.2017.1365987).
  13. (WP1-T4) Kpeky, K. Akoussan, F. Abed-Meraim, E.M. Daya, Influence of geometric and material parameters on the damping properties of multilayer structures, COMPOSITE STRUCTURES, 183 (2018) 611-619.
  14. (WP1-T5) Edalati, K, Novelli, M, Itano, S, Li, HW, Akiba, E, Horita, Z, Grosdidier, T, Effect of gradient-structure versus uniform nanostructure on hydrogen storage of Ti-V-Cr alloys: Investigation using ultrasonic SMAT and HPT processes, JOURNAL OF ALLOYS AND COMPOUNDS, 737 (2018) 337-346.
  15. (WP1-T5) Yan, P, Grosdidier, T, Zhang, XD, Zou, JX. Formation of large grains by epitaxial and abnormal growth at the surface of pulsed electron beam treated metallic samples, MATERIALS & DESIGN 159 (2018) 1-10.
  16. (WP1-T5) Novelli, M, Bocher, P, Grosdidier, T, Effect of cryogenic temperatures and processing parameters on gradient structure of a stainless steel treated by ultrasonic surface mechanical attrition treatment, MATERIALS CHARACTERIZATION 139 (2018) 197-207.

2018, WP2:

  1. (WP2-T1) K.O. Tveito, A. Pakanati, M. M’Hamdi, H. Combeau, M. Založnik, A Simplified Three-Phase Model of Equiaxed Solidification for the Prediction of Microstructure and Macrosegregation in Castings, METALLURGICAL AND MATERIALS TRANSACTIONS A 49 (2018) 2778–2794. doi:10.1007/s11661-018-4632-1.
  2. (WP2-T1) Zollinger, J , Rappaz, M, Influence of Minor Additions on Icosahedral Short-Range Order (ISRO) and Its Consequences on Nucleation and Solidification Growth Kinetics in fcc Alloys, TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 71 (2018) 2635-2638.
  3. (WP2-T1) A. Pakanati, M. M’Hamdi, H. Combeau, M. Založnik, Investigation of Macrosegregation Formation in Aluminium DC Casting for Different Alloy Systems, METALLURGICAL AND MATERIALS TRANSACTIONS A 49 (2018) 4710–4721. doi:10.1007/s11661-018-4731-z.
  4. (WP2-T1) Zollinger, M. Escot, L. Deillon, B. Rouat, D. Daloz, Th. Dupuy, Interface microstructure formation in Fe / Fe-Mn-C steel RSW joints, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 252 (2018) 697–704.
  5. (WP2-T1) Weiss, J. Zollinger, P. Sallamand, E. Cicala, E. Fleury, Microstructural study and mechanical properties of heterogeneous laser welding of α, β and α+β titanium alloys, WELD. WORLD 62 (5) (2018).
  6. (WP2-T1) Gaudez, S , Teixeira, J, Allain, SYP, Geandier, G, Goune, M, Soler, M, Danoix, F, Numerical Investigations of the Effects of Substitutional Elements on the Interface Conditions During Partitioning in Quenching and Partitioning Steels, METALLURGICAL AND MATERIALS TRANSACTIONS A 49A (2018) 2568-2572.
  7. (WP2-T1) Olmedilla, Antonio; Zaloznik, Miha; Rouat, Bernard; Combeau, Herve, Packing of sedimenting equiaxed dendrites, PHYSICAL REVIEW E, 97 (2018) 12910.
  8. (WP2-T2) Tim Krämer, Lena Eisenhut, Lionel Germain, Daniel Rupp, Eric Detemple, Christian Motz. Assessment of EBSD Analysis and Reconstruction Methods as a Tool for the Determination of Recrystallized Fractions in Hot-Deformed Austenitic Microstructures, METALLURGICAL AND MATERIALS TRANSACTIONS A, 49A (2018) 2795-2802.
  9. (WP2-T2) Ranger, Chasen, Vahid Tari, Susan Farjami, Matthew J. Merwin, Lionel Germain, Anthony Rollett. Austenite Reconstruction Elucidates Prior Grain Size Dependence of Toughness in a Low Alloy Steel. METALLURGICAL AND MATERIALS TRANSACTIONS A, 2018.
  10. (WP2-T2) Allain, Sebastien Yves Pierre; Gaudez, Steve; Geandier, Guillaume; Hell, Jean-Christophe; Goune, Mohamed; Danoix, Frederic; Soler, Michel; Aoued, Samy; Poulon-Quintin, Angeline, Internal stresses and carbon enrichment in austenite of Quenching and Partitioning steels from high energy X-ray diffraction experiments, MATERIALS SCI. ENG. A, 710 (2018) 245-250.
  11. (WP2-T2) P. Van Landeghem, S.D. Catteau, J. Teixeira, J. Dulcy, M. Dehmas, M. Courteaux, A. Redjaïmia, S. H Denis, Isothermal decomposition of carbon and nitrogen-enriched austenite in 23MnCrMo5 steel, ACTA MATERIALIA, 148 (2018) 363-373, https://doi.org/10.1016/j.actamat.2018.02.008
  12. (WP2-T2) Maury, N, Denand, B, Dehmas, M, Archambeau-Mirguet, C, Delfosse, J, Aeby-Gautier, E, Influence of the ageing conditions and the initial microstructure on the precipitation of alpha phase in Ti-17 alloy, JOURNAL OF ALLOYS AND COMPOUNDS 763 (2018) 446-458.
  13. Pradalier, C, Juan, PA, McCabe, RJ, Capolungo, L, A Graph Theory-Based Automated Twin Recognition Technique for Electron Backscatter Diffraction Analysis, INTEGRATING MATERIALS AND MANUFACTURING INNOVATION 7 (2018) 12-27.
  14. (WP2-T3) Francisco Cruz Gandarilla, Raùl Bolmaro, Claude Esling, Stuart Wright, Special Section on Texture and Microstructure, Editorial, 2018, https://doi.org/10.1002/adem.201800132.
  15. (WP2-T3) Li, Zongbin; Jiang, Yiwen; Li, Zhenzhuang; Sanchez Valdes, Cesar Fidel; Sanchez Llamazares, Jose Luis; Yang, Bo; Zhang, Yudong; Esling, Claude; Zhao, Xiang; Zuo, Phase transistion and magnetocaloric properties of Mn50Ni42-xCoxSn8 (0 <= x <= 10) melt-spun ribbons, IUCRJ 5 (2018) 54-66.
  16. (WP2-T3) Lino-Zapata, F. M.; Yan, H. L.; Rios-Jara, D.; Sanchez Llamazares, J. L.; Zhang, Y. D.; Zhao, X.; Zuo, L., Characterization of the kinetic arrest of martensitic transformation in Ni45Co5Mn36.8In13.2 melt-spun ribbons, JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 446 (2018) 253-259.
  17. (WP2-T3) Zou, Naifu; Li, Zongbin; Zhang, Yudong; Yang, Bo; Zhao, Xiang; Esling, Claude; Zuo, Lang, Plastic deformation of Ni-Mn-Ga 7M modulated martensite by twinning & detwinning and intermartensitic transformation, INTERNATIONAL JOURNAL OF PLASTICITY, 100 (2018) 1-13.
  18. (WP2-T3) Yan, HL, Sanchez-Valdes, CF, Zhang, YD, Llamazares, JLS, Li, ZB, Yang, B, Esling, C, Zhao, X, Zuo, L, Correlation between crystallographic and microstructural features and low hysteresis behavior in Ni50.0Mn35.25In14.75 melt-spun ribbons, JOURNAL OF ALLOYS AND COMPOUNDS 767 (2018) 544-551.
  19. (WP2-T3) Li, L, Bi, YT, Ban, CY, Zhang, HT, Liu, T, Wang, XJ, Esling, C, Cui, JZ, A Crystallographic Study on the Growth of Partially Faceted MnSn2 Phase during Solidification Process, CRYSTALS 8 (2018) DOI10.3390/cryst8100380.
  20. (WP2-T4) V.Q. Vu, Y. Beygelzimer, L.S. Toth, J.J. Fundenberger, R. Kulagin, C. Chen, The plastic flow machining: A new SPD       process for producing metal sheets with gradient structures, MATERIALS CHARACTERIZATION, 138 (2018) 208–214.
  21. (WP2-T4) V.Q. Vu, Y. Beygelzimer, R. Kulagin, L.S. Toth, The New Plastic Flow Machining Process for Producing Thin Sheets, ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (IF=1.37), Volume 2018, Article ID 8747960, https://doi.org/10.1155/2018/8747960.

2018, WP3: 

  1. (WP3-T1) P.O. Delzant, B. Baqué, Chapelle, A. Jardy, On the modelling of thermal radiation at the top surface of a vacuum arc remelting ingot, MET. TRANS. B, 49 (2018) 958-968.
  2. (WP3-T1) B. Tezenas du Montcel, Chapelle, A. Jardy, C. Creusot, Arc appearance and cathode spot distribution in a long gap high-current vacuum arc controlled by an external axial magnetic field, IEEE TRANS. ON PLASMA SCI. 1-9. 10.1109/TPS.2018.2858284.
  3. (WP3-T1) P.-O. Delzant, P. Chapelle, A. Jardy, On the Modeling of Thermal Radiation at the Top Surface of a Vacuum Arc Remelting Ingot, METALLURGICAL AND MATERIALS TRANSACTIONS B,  49 (2018) 958–968.
  4. (WP3-T2) H. Hamadeh, Mirgaux, F. Patisson, Detailed modeling of the direct reduction of iron ore in a shaft furnace, PREPRINTS,2018, 2018090115 (doi: 10.20944/preprints201809.0115.v1).
  5. (WP3-T3) Julien Favre, Paul Lohmuller, Boris Piotrowski, Samuel Kenzari, Pascal Laheurte, Fodil Meraghni, A continuous crystallographic approach to generate cubic lattices and its effect on relative stiffness of architectured materials, ADDITIVE MANUFACTURING, 21 (2018) 359-368. 
  6. S. Djaka, A. Moufki, M. Nouari, P. Laheurte, A. Tidu. A semi-analytical modelling of cutting using crystal plasticity theory and flow line approach. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 146–147 (2018) 49–59. 

 2018, WP4: 

  1. (WP4-T1) Marat I. Latypov, Markus Kühbach, Irene J. Beyerlein, Jean-Charles Stinville, Laszlo S. Toth, Surya R. Kalidindi, Application of chord length distributions and principal component analysis for quantification and representation of diverse polycrystalline microstructures, MATERIALS CHARACTERIZATION (IF=2.9), 145 (2018) 671-685, https://doi.org/10.1016/j.matchar.2018.09.020, 2018. 
  2. (WP4-T1) Marat I. Latypov, Laszlo S. Toth, Surya R. Kalidindi, Microstructure-sensitive mean-field model for nonlinear composite materials, arXiv Materials Science, arXiv:1809.07484v1 [cond-mat.mtrl-sci] (H5 index=145), 20 Sep 2018.
  3. (WP4-T1) Wagner, A. Ouarem, T. Richeton, L.S. Toth, Improving Mechanical Properties of cp Titanium by Heat Treatment Optimization, ADVANCED ENGINEERING MATERIALS, (2018) DOI: 10.1002/adem.201700237.
  4. (WP4-T1) Shun Xu, Christophe Schuman, Jean-Sébastien Lecomte, Jiang Wang, Secondary Twin Variant Selection in Four Types of Double Twins in Titanium, ACTA MATERIALIA 152 (2018) 58-76. 
  5. (WP4-T1) T. Camalet, A. Rusinek, R. Bernier, M. Karon, R. Massion, G. Z. Voyiadjis and M. Adamiak, Effect of Severe Plastic Deformation by 120 deg ECAP or Shock Impact on 6061 Aluminum Alloy at High Strain Rates, J. ENG. MATER. TECHNOL 140 (2018) doi: 10.1115/1.4039690.
  6. (WP4-T1) Hua, K, Zhang, YD, Gan, WM, Kou, HC, Li, JS, Esling, C, Correlation between imposed deformation and transformation lattice strain on alpha variant selection in a metastable beta-Ti alloy under isothermal compression, ACTA MATERIALIA 161 (2019) 150-160.
  7. (WP4-T1) Reshetov, A , Kulagin, R, Korshunov, A, Beygelzimer, Y, The Occurrence of Ideal Plastic State in CP Titanium Processed by Twist Extrusion, ADVANCED ENGINEERING MATERIALS 20 (2018) DOI:10.1002/adem.201700899.
  8. (WP4-T3) T.A. Lebedkina, D.A. Zhemchuzhnikova, M.A. Lebyodkin, Correlation versus randomization of jerky flow in an AlMgScZr alloy using acoustic emission, PHYS. REV. E, 97 (2018) 013001(9).
  9. (WP4-T3) T.A. Lebedkina, Y. Bougherira, D. Entemeyer, M.A. Lebyodkin, I.V. Shashkov, Crossover in the scale-free statistics of acoustic emission associated with the Portevin-Le Chatelier instability, SCRIPTA MATERIALIA, 148 (2018) 47-50.
  10. (WP4-T3) R. Tréhorel; G. Ribarik; T. Schenk, A. Jacques, Real-time study of transients during high-temperature creep of an Ni-base superalloy by far-field high-energy synchrotron X-ray diffraction. JOURNAL OF APPLIED CRYSTALLOGRAPHY, 2018, 51, doi: 10.1107/S1600576718010014.
  11. (WP4-T3) A. Jacques; R. Tréhorel, T. Schenk, High-Temperature Dislocation Climb in the g′ Rafts of Single-Crystal Superalloys: The Hypothesis of a Control by Dislocation Entry into the Rafts. METALLURGICAL AND MATERIALS TRANSACTIONS A, 2018, 49, 4110-4125, doi: 10.1007/s11661-018-4770-5.
  12. (WP4-T3) D.А. Zhemchuzhnikova, Lebyodkin, D. Yuzbekova, T. Lebedkina, A. Mogucheva, R. Kaibyshev, Interrelation between the Portevin Le-Chatelier effect and necking in AlMg alloys, INTERNATIONAL JOURNAL OF PLASTICITY 110 (2018) 95-109, DOI: 10.1016/j.ijplas.2018.06.012.
  13. (WP4-T4) Ben Bettaieb, F. Abed-Meraim, Ductility prediction of substrate-supported metal layers based on rate-independent crystal plasticity theory, INT. J. MAT. FORMING (2018) (DOI: 10.1007/s12289-018-1401-z).
  14. (WP4-T4) Bouktir Y, Chalal H, Abed-Meraim F. Prediction of necking in thin sheet metals using an elastic-plastic model coupled with ductile damage and bifurcation criteria. INTERNATIONAL JOURNAL OF DAMAGE MECHANICS, 27 (2018) (DOI: 10.1177/1056789517704030).
  15. (WP4-T4) Mohamed Ben Bettaieb, Farid Abed-Meraim, Strain localization analysis for planar polycrystals based on bifurcation theory, COMPTES RENDUS MECANIQUE, 346 (2018) 647–664.
  16. (WP4-T4) Wang, T.; Xu, F.; Huo, Y.; Potier-Ferry, M., Snap-through instabilities of pressurized balloons: Pear-shaped bifurcation and localized bulging, INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS, 98 (2018) 137-144.
  17. (WP4-T4) H. Tian, M. Potier-Ferry, F. Abed-Meraim, A numerical method based on Taylor series for bifurcation analyses within Föppl-von Karman plate theory, MECHANICS RESEARCH COMMUNICATIONS, (2018) (DOI: 10.1016/j.mechrescom.2017.12.006).
  18. (WP4-T4) O. Askour, A. Tri, B. Braikat, Hamid Zahrouni, M. Potier-Ferry. Method of fundamental solutions and high order algorithm to solve nonlinear elastic problems. ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS 89 (2018) 25–35.
  19. (WP4-T4) K. Kpogan, A. Tri,  A. Sogah, N. Mathieu, H. Zahrouni, M. Potier-Ferry. Combining MFS and PGD methods to solve transient heat equation. NUMERICAL METHODS FOR PARTIAL DIFFERENTIAL EQUATIONS. 34 (2018) 257–273.
  20. (WP4-T4) D.S. Zézé, M. Potier-Ferry, Y. Tampango, Multi-point Taylor series to solve differential equations, DISCRETE AND CONTINUOUS DYNAMICAL SYSTEMS SERIES S, accepted.
  21. (WP4-T4) L. Benchouaf, E. H. Boutyour, E. M. DayaM. Potier-Ferry, Non-linear Vibrations of Sandwich Viscoelastic shells, COMPTES RENDUS MECANIQUE, 346 (2018) 308-319.
  22. (WP4-T4) J. Yang, H. Hu, M. Potier-Ferry, Computing singular solutions of partial differential equations by Taylor series, COMPTES RENDUS MECANIQUE, 346 (2018) 603-614.

2018, WP5:

  1. (WP5-T2) A. Gupta, Ben Bettaieb, F. Abed-Meraim, S.R. Kalidindi, Computationally efficient predictions of crystal plasticity based forming limit diagrams using a spectral database, INTERNATIONAL JOURNAL OF PLASTICITY, 103 (2018) 168-187.
  2. (WP5-T2) Fessal Kpeky, Farid Abed-Meraim, El Mostafa DAYA, New linear and quadratic prismatic piezoelectric solid-shell finite elements, APPL. MATH. AND COMPUTATION. 319 (2018) 355-368.
  3. (WP5-T2) Fessal Kpeky, Farid Abed-Meraim, Hakim Boudaoud, El Mostafa Daya. Linear and quadratic solid–shell finite elements SHB8PSE and SHB20E for the modeling of piezoelectric sandwich structures. MECHANICS OF ADVANCED MATERIALS AND STRUCTURES, 25 (2018) 559-578.
  4. (WP5-T2) Komlan Akoussan, Hakim Boudaoud, El Mostafa Daya, Yao Koutsawa & Erasmo Carrera. Numerical method for nonlinear complex eigenvalues problems depending on two parameters. Application to three-layered viscoelastic composite structures. MECHANICS OF ADVANCED MATERIALS AND STRUCTURES 25 (2018) 1361-1373.
  5. (WP5-T2) Xu, R, Bouby, C, Zahrouni, H, Ben Zineb, T, Hu, H, Potier-Ferry, M, 3D modeling of shape memory alloy fiber reinforced composites by multiscale finite element method, COMPOSITE STRUCTURES 200 (2018) 408-419.
  6. (WP5-T4) Lhadi, S. Berbenni, N. Gey, T. Richeton, L. Germain, Micromechanical modeling of the effect of elastic and plastic anisotropies on the mechanical behavior of β-Ti alloys, INTERNATIONAL JOURNAL OF PLASTICITY, 109 (2018) 88-107. 

2017, WP1:

  1. (WP1-T1) Martinavičius, H. P. Van Landeghem, R. Danoix, A. Redjaïmia, M. Gouné, F. Danoix, Mechanism of Si3N4 precipitation in nitrided Fe-Si alloys: A novel example of particle-stimulated nucleation, MATERIALS LETTERS, 189 (2017) 25–27.
  2. (WP1-T1) Nomine, A.; Nomine, A. V.; Braithwaite, N. St. J.; Belmonte, T.; Henrion, G., High-Frequency-Induced Cathodic Breakdown during Plasma Electrolytic Oxidation, PHYSICAL REVIEW APPLIED, 8 (2017) 31001.
  3. (WP1-T2) T. Reilly, B. Rouat, G. Martin, D. Daloz, J. Zollinger, Enhanced dendrite fragmentation through the peritectic reaction in TiAl-based alloys, INTERMETALLICS 86 (2017) 126 – 133.
  4. (WP1-T2) Ramirez, C.; Ismail, A. Idhil; Gendarme, C.; Dehmas, M.; Aeby-Gautier, E.; Poulachon, G.; Rossi, F., Understanding the diffusion wear mechanisms of WC-10%Co carbide tools during dry machining of titanium alloys, WEAR 390-391 (2017) 61-70.
  5. (WP1-T2) Yuan, E. Brodu, C. Chen, E. Bouzy, J-J. Fundenberger, L.S. Toth, On-Axis Versus off-Axis Transmission Kikuchi Diffraction Technique: Application to the Characterization of Severe Plastic Deformation Induced Ultrafine Grained Microstructures”, JOURNAL OF MICROSCOPY, 267 (2017) 70-80.
  6. (WP1-T2) E. Brodu, E. Bouzy, J-J. Fundenberger, “Diffraction contrast dependence on sample thickness and incident energy in on-axis Transmission Kikuchi Diffraction in the SEM”, ULTRAMICROSCOPY 181 (2017) 123–133.
  7. (WP1-T2) Cheng, L., Li, JS., Xue, XY., Tang, B., Kou, HC., Perroud, O., Bouzy, E. “Effect of β/B2 phase on cavitation behavior during superplastic deformation of TiAl alloys” JOURNAL OF ALLOYS AND COMPOUNDS, 693 (2017) 749-759.
  8. (WP1-T2) L. Cheng, Y. Chen, JS Li, E. Bouzy, “Superplastic deformation mechanism of a γ-TiAl alloy with coarse and bimodal grain structure” MATERIALS LETTERS 194 (2017) 58-61.
  9. (WP1-T2) Cheng, Liang; Li, Jinshan; Xue, Xiangyi; Tang, Bin; Kou, Hongchao; Perroud, Olivier; Bouzy, Emmanuel, Effect of beta/B2 phase on cavitation behavior during superplastic deformation of TiAl alloys, JOURNAL OF ALLOYS AND COMPOUNDS, 693 (2017) 740-759.
  10. (WP1-T2) L. Rabahi, B. Alili, D. Bradai, Grosdidier, A. Kellou, DFT calculations of structural, magnetic and thermal properties of C15, C14 and C36 Laves phases in Fe-Nb-Zr, INTERMETALLICS 83 (2017) 92-100.
  11. (WP1-T2) Bouzy, J-J. Fundenberger, J. Guyon, A. Guitton, Y-D Zhang “On-axis TKD for orientation mapping of nanocrtstalline materials in SEM” E. Brodu, MATERIALS CHARACTERIZATION 130 (2017) 92-96
  12. (WP1-T2) Brodu, E. Bouzy « Depth Resolution Dependence on Sample Thickness and Incident Energy in On-Axis Transmission Kikuchi Diffraction in Scanning Electron Microscope (SEM) » MICROSC. MICROANAL. 23 (2017) 1096–1106.
  13. (WP1-T2) Martin, J.; Nomine, A.; Brochard, F.; Briancon, J. -L.; Noel, C.; Belmonte, T.; Czerwiec, T.; Henrion, G., Delay in micro-discharges appearance during PEO of Al: Evidence of a mechanism of charge accumulation at the electrolyte/oxide interface, APPLIED SURFACE SCIENCE, 410 (2017) 29-41.
  14. (WP1 – T3) L. Rabahi, M. Gallouze, Grosdidier, D. Bradai, A. Kellou, Energetics of atomic hydrogen absorption in C15-Fe 2 Zr Laves phases with ternary additions: A DFT study, INT. J. HYDROGEN ENERGY, 42 (2017) 2157-2166.
  15. (WP1 – T3) Wu, B. L.; Duan, G. S.; Du, X. H.; Song, L. H.; Zhang, Y. D.; Philippe, M. J.; Esling, C., In situ investigation of extension twinning-detwinning and its effect on the mechanical behavior of AZ31B magnesium alloy, MATERIALS AND DESIGN, 132 (2017) 57-65.
  16. (WP1-T3) Martin, A. Nominé, F. Brochard, J.-L. Briançon, C. Noël, T. Belmonte, T. Czerwiec, G. Henrion, Delay in micro-discharge appearance during PEO of Al: Evidence of a mechanism of charge accumulation at the electrolyte/oxide interface, APPLIED SURFACE SCIENCE, 410 (2017) 29-41, doi: 10.1016/j.apsusc.2017.03.088
  17. (WP1-T4) Queudet, S. Lemonnier, E. Barraud, J. Ghanbaja, N. Allain, E. Gaffet, Effect of heat treatments on the microstructure of an ultrafine-grained Al-Zn-Mg alloy produced by powder metallurgy, MATERIALS SCI. ENG. A, 685 (2017) 71-78.
  18. (WP1-T4) Akoussan, Komlan; Hamdaoui, Mohamed; Daya, El Mostafa, Improved layer-wise optimization algorithm for the design of viscoelastic composite structures, COMPOSITE STRUCTURES, 176 (2017) 342-358.
  19. (WP1-T4) Druesne F, Hamdaoui M, Yin Q, Daya E. Variability Analysis of Modal Characteristics of Frequency-Dependent Visco-Elastic Three-Layered Sandwich Beams With Spatial Random Geometrical and Material Properties. ASME. J. VIB. ACOUST. (2017) 139 (6).
  20. (WP1-T4) Queudet, S. Lemonnier, E. Barraud, J. Ghanbaja, Allain, E. Gaffet, Effect of heat treatments on the microstructure of an ultrafine-grained Al-Zn-Mg alloy produced by powder metallurgy, MATERIALS SCI. ENG. A, 685 (2017), 71-78.
  21. (WP1-T4) Queudet, S. Lemonnier, E. Barraud, J. Guyon, J. Ghanbaja, Allain, E. Gaffet, One-step consolidation and precipitation hardening of an ultra-fine grained Al-Zn-Mg alloy by Spark Plasma Sintering, MATERIALS SCI. ENG. A, 685 (2017), 227-234.
  22. (WP1-T5) Subrata Panda, Jean-Jacques Fundenberger, Yajun Zhao, Jianxin Zou, Laszlo S. Toth, Thierry Grosdidier, Effect of initial powder type on the hydrogen storage properties of high-pressure torsion consolidated Mg, INT. J. HYDROGEN ENERGY, 42 (2017) 22438-22448.
  23. (WP1-T5) Mondet, E. Barraud, S. Lemonnier, N Allain, T Grosdidier, Optimisation of the mechanical properties of a Spark Plasma Sintered (SPS) magnesium alloy through a post-sintering in-situ precipitation treatment, JOURNAL OF ALLOYS AND COMPOUNDS 698 (2017) 259-266.

2017, WP2:

  1. (WP2-T1) Siredey-Schwaller, N.; Hamel-Akre, J.; Peltier, L.; Hazotte, A.; Bocher, P., Solidification sequence of Ni-Si-Cr similar to 3wt% B brazing alloys, WELDING IN THE WORLD, 61 (2017) 1253-1265.
  2. (WP2-T1) Heyvaert, Laurent; Bedel, Marie; Zaloznik, Miha; Combeau, Herve, Modeling of the Coupling of Microstructure and Macrosegregation in a Direct Chill Cast Al-Cu Billet, MET. TRANS. A, 48° (2017) 4713-4734.
  3. (WP2-T1) Aboudi, S. Lebaili, M. Taouinet, J. Zollinger, Microstructure evolution of diffusion welded 304L/Zircaloy4 with copper interlayer, MATERIALS AND DESIGN 116 (2017) 386 – 394.
  4. (WP2-T1) Thangaraju, Shanmugasundaram; Bouzy, Emmanuel; Hazotte, Alain, Phase Stability of a Mechanically Alloyed CoCrCuFeNi High Entropy Alloy, ADVANCED ENGINEERING MATERIALS, 19 (2017) 1700095.
  5. (WP2-T2) Liu, Tao; Germain, Lionel; Teixeira, Julien; Aeby-Gautier, Elisabeth; Gey, Nathalie, Hierarchical criteria to promote fast and selective alpha(GB) precipitation at beta grain boundaries in beta-metastable Ti-alloys, ACTA MATERIALIA, 141 (2017) 97-108.
  6. (WP2-T2) Rementeria, Rosalia; Jimenez, Jose A.; Allain, Sebastien Y. P.; Geandier, Guillaume; Poplawsky, Jonathan D.; Guo, Wei; Urones-Garrote, Esteban; Garcia-Mateo, Carlos; Caballero, Francisca G., Quantitative assessment of carbon allocation anomalies in low temperature bainite, ACTA MATERIALIA, 133 (2017) 333-345.
  7. (WP2-T2) Allain, Sebastien Yves Pierre; Geandier, Guillaume; Hell, Jean-Christophe; Soler, Michel; Danoix, Frederic; Goune, Mohamed, Effects of Q&P Processing Conditions on Austenite Carbon Enrichment Studied by in Situ High-Energy X-ray Diffraction Experiments, METALS, 7 (2017) 232.
  8. (WP2-T2) Fan, Jiangkun; Li, Jinshan; Zhang, Yudong; Kou, Hongchao; Ghanbaja, Jaafar; Gan, Weimin; Germain, Lionel; Esling, Claude, The origin of striation in the metastable beta phase of titanium alloys observed by transmission electron microscopy, JOURNAL OF APPLIED CRYSTALLOGRAPHY, 50 (2017) 795-804.
  9. (WP2-T2) Fan, Jiangkun; Li, Jinshan; Zhang, Yudong; Kou, Hongchao; Germain, Lionel; Siredey-Schwaller, Nathalie; Esling, Claude, Microstructure and Crystallography of alpha Phase Nucleated Dynamically during Thermo-Mechanical Treatments in Metastable beta Titanium Alloy, ADVANCED ENGINEERING MATERIALS, 19 (2017) 1600859.
  10. (WP2-T2) Hua, Ke; Zhang, Yudong; Kou, Hongchao; Li, Jinshan; Gan, Weimin; Fundenberger, Jean-Jacques; Esling, Claude, Reply to comments on composite structure of a phase in metastable beta Ti alloys induced by lattice strain during beta to alpha phase transformation, SCRIPTA MATERIALIA, 141 (2017) 148-150.
  11. (WP2-T2) Ben Saada, M.; Gey, N.; Beausir, B.; Iltis, X.; Mansour, H.; Maloufi, N., Sub-boundaries induced by dislocational creep in uranium dioxide analyzed by advanced diffraction and channeling electron microscopy, MATERIALS CHARACTERIZATION, 133 (2017) 112-121.
  12. (WP2-T2) Y.P. Allain, G. Geandier, J.C. Hell, M. Soler, F. Danoix, M. Gouné, In-situ investigation of quenching and partitioning by High Energy X-Ray Diffraction experiments, SCRIPTA MATERIALIA. 131 (2017) 15-18.
  13. (WP2-T2) Fan, Jiangkun; Li, Jinshan; Zhang, Yudong; Kou, Hongchao; Germain, Lionel; Esling, Claude, Formation and crystallography of nano/ultrafine-trimorphic structure in metastable beta titanium alloy Ti-5Al-5Mo-5V-3Cr-0.5Fe processed by dynamic deformation at low temperature, MATERIALS CHARACTERIZATION, 130 (2017) 149-155.
  14. (WP2-T3) Naifu Zou, Zongbin Li, Yudong Zhang, C. F. Sanchez Valdes, J. L. Sanchez Llamazares, Claude Esling, Bo Yang, Xiang Zhao, Liang Zuo, Transformation process dependent magnetocaloric properties of annealed Ni50Mn18Cu7Ga25 ribbons, JOURNAL OF ALLOYS AND COMPOUNDS, 698 (2017) 731-738.
  15. (WP2-T3) Yang, Yiqiao; Li, Zongbin; Li, Zhenzhuang; Yang, Jiajing; Yang, Bo; Dong, Yu; Yan, Haile; Zhang, Yudong; Esling, Claude; Zhao, Xiang; Zuo, Liang, Microstructural Feature and Magnetocaloric Effect of Mn50Ni40.5In9.5 Melt-Spun Ribbons, CRYSTALS, 7 (2017) 289.
  16. (WP2-T3) Chunyang Zhang, Haile Yan, Yudong Zhang, Claude Esling, Xiang Zhao, Liang Zuo, Microstructural and Crystallographic Insights in a Martensite/Austenite Dual Phase Ni–Mn–Sb Alloy. ADVANCED ENGINEERING MATERIALS. (2017) DOI: 10.1002/adem.201700221.
  17. (WP2-T3) Bo Yang, Tingting Liu, Xiaowen Hao, Zongbin Li, Yudong Zhang, Gaowu Qin, Marie-Jeanne Philippe, Claude Esling, Xiang Zhao, Liang Zuo, Crystallography of Martensitic Transformation in Epitaxial Ni50Mn30Ga20 Thin Film. ADVANCED ENGINEERING MATERIALS. (2017) DOI: 10.1002/adem.201700171.
  18. (WP2-T3) Zhenzhuang Li, Zongbin Li, Bo Yang, Yiqiao Yang, Yudong Zhang, Claude Esling, Xiang Zhao, Liang Zuo, Large low-field magnetocaloric effect in directionally solidified Ni55Mn18+xGa27-x (x=0, 1, 2) alloys, JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS 445 (2018) 71-76.
  19. (WP2-T3) Yanchao Dai, Long Hou, Yves Fautrelle, Zongbin Li, Claude Esling, Zhongming Ren, Xi Li, Determination of structural and magnetic properties in directionally solidified Ni-Mn-Ga rod with an axial compositional variation, MATERIALS AND DESIGN 134 (2017) 469-475.
  20. (WP2-T3) Yanchao Dai, Long Hou, Yves Fautrelle, Zongbin Li, Claude Esling, Zhongming Ren, Xi Li, Martensitic transformation and detwinning in directionally solidified two-phase Ni-Mn-Ga alloys under uniaxial compression, JOURNAL OF ALLOYS AND COMPOUNDS 722 (2017) 721-728.
  21. (WP2-T3) Li, Zongbin; Li, Zhenzhuang; Yang, Bo; Zhang, Yudong; Esling, Claude; Zhao, Xiang; Zuo, Liang, Large low-field magnetocaloric effect in a directionally solidified Ni50Mn18Cu7Cu25 alloy, INTERMETALLICS, 88 (2017) 31-35.
  22. (WP2-T3) Zhang, Chunyang; Zhang, Yudong; Esling, Claude; Zhao, Xiang; Zuo, Liang, Crystallographic features of the martensitic transformation and their impact on variant organization in the intermetallic compound Ni50Mn38Sb12 studied by SEM/EBSD, IUCRJ, 4 (2017) 700-709.
  23. (WP2-T3) Li, Zongbin; Yang, Bo; Zou, Naifu; Zhang, Yudong; Esling, Claude; Gan, Weimin; Zhao, Xiang; Zuo, Liang, Crystallographic Characterization on Polycrystalline Ni-Mn-Ga Alloys with Strong Preferred Orientation, MATERIALS 10 (2017) 463.
  24. (WP2-T4) Subrata Panda, Laszlo S. Toth, Jean-Jacques Fundenberger, Olivier Perroud, Julien Guyon, Jianxin X. Zou, Thierry Grosdidier, Analysis of heterogeneities in strain and microstructure in aluminum alloy and magnesium processed by high pressure torsion, MATERIALS CHARACTERIZATION 123 (2017) 159–165.
  25. (WP4-T1) R. Lapovok, Y. Qi, H.P. Ng, L.S. Toth, Y. Estrin, Gradient Structures in Thin‐Walled Metallic Tubes Produced by Continuous High Pressure Tube Shearing Process, ADVANCED ENGINEERING MATERIALS, 19 (2017) 1700345. doi:10.1002/adem.201700345.

2017, WP3:

  1. (WP3-T1) Castro-Cedeno, E. -I.; Jardy, A.; Carre, A.; Gerardin, S.; Bellot, J. P., Thermal Modeling of the Injection of Standard and Thermally Insulated Cored Wire, MET. TRANS. B, 48 (2017) 3316-3328.
  2. (WP3-T1) Choi, J. Jourdan, A. Matveichev, A. Jardy, J.P. Bellot, Kinetics of evaporation of alloying elements under vacuum: application to Ti alloys in Electron Beam Melting, J. HIGH TEMP. MAT. PROC., 36 (2017) 815-824.
  3. (WP3-T1) C. Reimer, J. Jourdan, P. Bellot, Ti-17 volatilization under vacuum: investigation of the activity coefficient at 1900 °C, CALPHAD, 58 (2017) 122-127.
  4. (WP3-T1) B. Tezenas du Montcel, Chapelle, A. Jardy, C. Creusot, Evolution of the cathode spot distribution in an axial magnetic field controlled vacuum arc at long contact gap, PLASMA PHYSICS AND TECHNOLOGY, 4 (2017) 99-103.

2017, WP4:

  1. (WP4-T1) Shun Xu, Laszlo S. Toth, Christophe Schuman, Jean-Sébastien Lecomte, Matthew R. Barnett, Dislocation mediated variant selection for secondary twinning in compression of pure titanium, ACTA MATERIALIA, 124C (2017) 59-70.
  2. (WP4-T1) Yajun Zhao, Laszlo S. Toth, Roxane Massion, and Werner Skrotzki, Role of Grain Boundary Sliding in Texture Evolution for Nanoplasticity, ADVANCED ENGINEERING MATERIALS, 2017, 1700212. DOI: 10.1002/adem.201700212.
  3. (WP4-T1) Xu, Shun; Gong, Mingyu; Schuman, Christophe; Lecomte, Jean-Sebastien; Xie, Xinyan; Wang, Jian, Sequential {10-12} twinning stimulated by other twins in titanium, ACTA MATERIALIA, 132 (2017) 57-68.
  4. (WP4-T1) Yan Beygelzimer, Roman Kulagin, Yuri Estrin, Laszlo S. Toth, Hyoung Seop Kim, Marat I. Latypov, Twist Extrusion as a Potent Tool for Obtaining Advanced Engineering Materials: A Review, ADVANCED ENGINEERING MATERIALS, 19 (2017) 1600873. doi:10.1002/adem.201600873.
  5. (WP4-T1) Xu, Shun; Schuman, Christophe; Lecomte, Jean-Sebastien, Selection criterion for {11-22} twinning in rolled pure titanium, MRS ADVANCES, 2 (2017) 1455-1461.
  6. (WP4-T1) Roman Kulagin, Yajun Zhao, Yan Beygelzimer, Laszlo S. Toth, Michail Shtern, Modeling strain and density distributions during high pressure torsion of pre-compacted powder materials, MATERIALS RESEARCH LETTERS, 5 (2017) 179-186  http://dx.doi.org/10.1080/21663831.2016.1241318.
  7. (WP4-T1) Song, L. H.; Wu, B. L.; Zhang, L.; Du, X. H.; Wang, Y. N.; Zhang, Y. D.; Esling, C., MATERIALS SCI. ENG. A, 689 (2017) 134-141.
  8. (WP4-T2)A Rodríguez-Martínez., A. Molinari, R. Zaera, G. Vadillo, J. Fernández-Sáez, The critical neck spacing in ductile plates subjected to dynamic biaxial loading: On the interplay between loading path and inertia effect, INTERNATONAL JOURNAL OF SOLIDS AND STRUCTURES, 108 (2017) 74-84.
  9. (WP4-T3) Scott, C.P.; Fazeli, F.; Shalchi Amirkhiz, B.; Pushkareva, I.; Allain, S.Y.P., Structure-Properties Relationship of ultrafine grained V-microalloyed Dual Phase Steels, MATERIALS SCI. ENG. A, 703 (2017) 293.
  10. (WP4-T3) Tamas Ungar, Stefanus Harjo, Takuro Kawasaki, Yo Tomota, Gabor Ribarik, Zengmin Shi, Composite Behavior of Lath Martensite Steels Induced by Plastic Strain, a New Paradigm for the Elastic-Plastic Response of Martensitic Steels, MET. TRANS. A, 48A (2017) 159-167, DOI 10.1007/s11661-016-3845-4.
  11. (WP4-T3) Langrand, Christopher; Hilairet, Nadege; Nisr, Carole; Roskosz, Mathieu; Ribarik, Gabor; Vaughan, Gavin B. M.; Merkel, Sebastien, Reliability of multigrain indexing for orthorhombic polycrystals above 1 Mbar: application to MgSiO3 post-perovskite, JOURNAL OF APPLIED CRYSTALLOGRAPHY, 50 (2017) 120-130.
  12. (WP4-T3) A. Lebyodkin, I.V. Shashkov, T.A. Lebedkina, V.S. Gornakov, Experimental investigation of the effect of thresholding on the temporal statistics of avalanches, PHYS. REV. E. 95 (2017) 032910(7).
  13. (WP4-T3) P. Kobelev, M.A. Lebyodkin, T.A. Lebedkina, Role of self-organization of dislocations in the onset and kinetics of macroscopic plastic instability, MET. TRANS. A48 (2017) 965-974.
  14. (WP4-T3) M.A. Lebyodkin, T.A. Lebedkina, I.V. Shashkov, V.S. Gornakov, Long-time spontaneous breakdown of antiferromagnet order in polycrystalline NiFe/NiO bilayers probed with   acoustic emission, APPL. PHYS. LETT., 111 (2017) 032407(5); doi: 10.1063/1.4994812.
  15. (WP4-T3) T. Seymour, P. Frankel, L. Balogh, Ungar, S.P. Thompson, D. Jadernas, J. Romero, L. Hallstadius, M.R. Daymond, G. Ribarik, M. Preuss, Evolution of dislocation structure in neutron irradiated Zircaloy-2 studied by synchrotron x-ray peak profile analysis, ACTA MATERIALIA, 126 (2017) 102-113.
  16. (WP4-T3) D. Zhemchuzhnikova, M. Lebyodkin, T. Lebedkina, A. Mogucheva, D. Yuzbekova, Rustam Kaibyshev, Peculiar Spatiotemporal Behavior of Unstable Plastic Flow in an AlMgMnScZr Alloy with Coarse and Ultrafine Grains, METALS, 7 (2017) 325(13). Doi: 10.3390/met7090325.
  17. (WP4-T3) Yuzbekova, D.; Mogucheva, A.; Zhemchuzhnikova, D.; Lebedkina, T.; Lebyodkin, M.; Kaibyshev, R., Effect of microstructure on continuous propagation of the Portevin-Le Chatelier deformation bands, INTERNATIONAL JOURNAL OF PLASTICITY, 96 (217) 210-226.
  18. (WP4-T4) H.K. Akpama, M. Ben Bettaieb, F. Abed-Meraim, Localized necking predictions based on rate-independent self-consistent polycrystal plasticity: Bifurcation analysis versus imperfection approach, INTERNATIONAL JOURNAL OF PLASTICITY, 91 (2017) 205-237 (DOI: 10.1016/j.ijplas.2017.02.001).
  19. (WP4-T4) M. Ben Bettaieb, F. Abed-Meraim, Effect of kinematic hardening on localized necking in substrate-supported metal layers, INT. J. MECH. SCI. 123 (2017) 177-197.
  20. (WP4-T4) Mohamed Ben Bettaieb, Farid Abed-Meraim, Localized necking in elastomer-supported metal layers: Impact of kinematic hardening, J. MANUFACTURING SCI. AND ENG. (TRANSACTION ASME), 139 (6) (2017) 061008.
  21. (WP4-T4) S. Mesmoudi, A. Timesli, B. Braikat, H. Lahmam, H. Zahrouni. A 2D mechanical-thermal coupled model to simulate material mixing observed in Friction Stir Welding process. ENGINEERING WITH COMPUTERS, 33 (2017) 885-895.
  22. (WP4-T4) Mathieu, M. Potier-Ferry, H. Zahrouni. Reduction of flatness defects in thin metal sheets by a pure tension leveler. INT. J. MECH. SCI. 122 (2017) 267–276.
  23. (WP4-T4) Kpogan, H. Zahrouni, M. Potier-Ferry, H. Ben Dhia. Buckling of rolled thin sheets under residual stresses by ANM and Arlequin method. INT. J. MAT. FORMING, 10 (2017) 389-404.
  24. (WP4-T4) Xu, Fan; Abdelmoula, Radhi; Potier-Ferry, Michel, On the buckling and post-buckling of core-shell cylinders under thermal loading, INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 126 (2017) 17-36.
  25. (WP4-T4) Xu, F.; Wang, T.; Fu, C.; Cong, Y.; Huo, Y.; Potier-Ferry, M., Post-buckling evolution of wavy patterns in trapezoidal film/substrate bilayers, INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS, 96 (2017) 46-55.
  26. (WP4-T4) Yang, Jie; Hu, Heng; Koutsawa, Yao; Potier-Ferry, Michel, Taylor meshless method for solving non-linear partial differential equations, JOURNAL OF COMPUTATIONAL PHYSICS, 348 (2017) 385-400.
  27. (WP4-T4) Mohamed Ben Bettaieb, Farid Abed-Meraim, Numerical investigation of the combined effects of curvature and normal stress on sheet metal formability, INT. J. MATER. FORMING, (2017) (DOI 11007/s12289-017-1382-3).
  28. (WP4-T4) Mohamed Ben Bettaieb, Farid Abed-Meraim, Strain rate effects on localized necking in substrate-supported metal layers. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 92 (2017) 3461-3480.
  29. (WP4-T4) Mohamed Ben Bettaieb, Farid Abed-Meraim, Theoretical and numerical investigation of the impact of out-of-plane compressive stress on sheet metal formability. J. MEC. SCI., 130 (2017) 244–257.
  30. (WP4-T4) Chalal, F. Abed-Meraim, Determination of Forming Limit Diagrams Based on Ductile Damage Models and Necking Criteria. LATIN AMERICAN JOURNAL OF SOLIDS AND STRUCTURES, 14 (2017) 1872-1892.
  31. (WP4-T4) Xu, Fan; Potier-Ferry, Michel, Quantitative predictions of diverse wrinkling patterns in film/substrate systems, SCIENTIFIC REPORTS, 7 (2017) 18081.
  32. (WP4-T4) Q. Huang, Y. Liu, Hu, Q. Shao, K. Yu, G. Giunta, S. Belouettar, M. Potier-Ferry, A Fourier-related double scale analysis on the instability phenomena of sandwich plates, COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING, 318 (2017) 270-295.
  33. (WP4-T4) Q. Huang, Xu, Y. Liu, H. Hu, G. Giunta, S. Belouettar, M. Potier-Ferry, A two-dimensional Fourier-series finite element for wrinkling analysis of thin films on compliant substrates, THIN-WALLED STRUCTURES, 114, pp 144–153, 2017.
  34. (WP4-T4) Yang, H. Hu, M. Potier-Ferry, Solving large scale problems by Taylor Meshless Method, INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, 112 (2017) 103-124.

2017, WP5:

  1. (WP5-T2) Akpama HK, Ben Bettaieb M, Abed-Meraim F, Prediction of plastic instability in sheet metals during forming processes using the loss of ellipticity approach. LATIN AMERICAN JOURNAL OF SOLIDS AND STRUCTURES, 14 (2017) 1816-1836.
  2. (WP5-T3) Komlan Sénam Djaka, Aurélien Villani, Vincent Taupin, Laurent Capolungo, Stéphane Berbenni, Field Dislocation Mechanics for heterogeneous elastic materials: A numerical spectral approach, COMPUTER METHODS IN APPL. MECH. AND ENG., 315 (2017) 921-942.
  3. (WP5-T3) Vincent Taupin, Kodjovi Gbemou, Claude Fressengeas, Laurent Capolungo, Nonlocal elasticity tensors in dislocation and disclination cores, J. MECH. PHYS. SOLIDS, 100 (2017) 62-84.
  4. (WP5-T5) A. Viardin, Založnik, Y. Souhar, M. Apel, H. Combeau, Mesoscopic modeling of spacing and grain selection in columnar dendritic solidification: envelope versus phase-field model, ACTA MATERIALIA 122 (2017) 386–399.
  5. (WP5-T2) Soho K, Lemoine X, Abed-Meraim F, Zahrouni H. Investigation of the effect of temper rolling on the texture evolution and mechanical behavior of IF steels using multiscale simulation. J. MATER. FORMING, 10 (2017) 29-42, DOI: 10.1007/s12289-015-1257-4.
  6. (WP5-T2) Robin, N. Mathieu, M. Jrad, E.M. Daya, F. Choquart, The effect of the geometricparameters of the corrugation shape on the vibration analysis of 3D structuredbeams, MECHANICS RESEARCH COMMUNICATIONS, 84 (2017) 65-71.
  7. (WP5-T5) Phillion, A. B.; Zaloznik, M.; Spindler, I.; Pinter, N.; Aledo, C. -A.; Salloum-Abou-Jaoude, G.; Thi, H. Nguyen; Reinhart, G.; Boussinot, G.; Apel, M.; Combeau, H., Evolution of a mushy zone in a static temperature gradient using a volume average approach, ACTA MATERIALIA, 141 (2017) 206-216.

2016, WP1:

  1. (WP1 – T1) M. Novelli, J.J. Fundenberger, P. Bocher, T. Grosdidier, On the effectiveness of surface severe plastic deformation by shot peening at cryogenic temperature, APPLIED SURFACE SCIENCE 389 (2016) 1169-1174.
  2. (WP1-T1) J. Martin, A. Martinavicius, S. Bruyère, H. P. Van Landeghem, C. Gendarme, F. Danoix, R. Danoix, A. Redjaimia, T. Grosdidier, T. Czerwiec, Multiscale analysis of an ODS FeAl40 intermetallic after plasma-assisted nitriding, JOURNAL OF ALLOYS AND COMPOUNDS, 683 (2016) 418-426.
  3. (WP1) Fundenberger, J.J., Bouzy, E., Goran, D., Guyon, J., Yuan, H.  Morawiec, A., Orientation mapping by transmission-SEM with an on-axis detector, ULTRAMICROSCOPY, 161 (2016) 17-22.
  4. (WP1-T2) Guyon, J., Hazotte, A., Bouzy, E., Evolution of metastable alpha phase during heating of Ti48Al2Cr2Nb intermetallic alloy, JOURNAL OF ALLOYS AND COMPOUNDS, 656 (2016) 667-675.
  5. (WP1-T2) Guyon, J., Hazotte, A., Wagner, F., Bouzy, E., Recrystallization of coherent nanolamellar structures in Ti48Al2Cr2Nb intermetallic alloy, ACTA MATERIALIA, 103 (2016) 672-680.
  6. (WP1-T2) Cheng, L., Li, JS., Xue, XY., Tang, B., Kou, HC., Bouzy, E. Superplastic deformation mechanisms of high Nb containing TiAl alloy with (alpha2+gamma) microstructure, INTERMETALLICS, 75 (2016) 62-71.
  7. (WP1-T2) Cheng, L., Li, JS., Xue, XY., Tang, B., Kou, HC., Bouzy, E. General features of high temperature deformation kinetics for gamma-TiAl-based alloys with DP/NG microstructures, MATERIALS SCI. ENG. A, 678 (2016), 389-401.
  8. (WP1-T4) K. Lougou, Boudaoud,  E.M. Daya and L. Azrar. Vibration modeling of large repetitive sandwich structures with viscoelastic core, MECH. ADV. MATER. AND STRUCTURES, 23 (2016) 458-466.
  9. (WP1-T4) H. Queudet, S. Lemonnier, E. Barraud, J. Guyon, J. Ghanbaja, N. Allain, E. Gaffet, One-step consolidation and precipitation hardening of an ultra-fine grained Al-Zn-Mg alloy powder by Spark Plasma Sintering, MATERIALS SCI. ENG. A, 685 (2016) 227-234.
  10. (WP1 – T5) M. Mondet, E. Barraud, S. Lemonnier, J. Guyon, N. Allain, T. Grosdidier, Nanostructured Mg based hydrogen storage bulk materials prepared by high pressure torsion consolidation of arc plasma evaporated ultrafine powders, ACTA MATERIALIA 119 (2016) 55-67.

2016, WP2:

  1. (WP2-T2) Catteau, S. D.; Van Landeghem, H. P., Teixeira, J., Dulcy, J., Dehmas, M., Denis, S., Redjaimia,, Courteaux, M., Carbon and nitrogen effects on microstructure and kinetics associated with bainitic transformation in a low-alloyed steel, JOURNAL OF ALLOYS AND COMPOUNDS, 658 (2016) 832-838.
  2. (WP2) M. Ben Haj Slama, Gey, L. Germain, J.C. Hell, K. Zhu, S. Allain, ‘Fast Granularization of lath−like Bainite in FeNiC Alloys during Isothermal Holding at Ms+20°C, MET. TRANS. A 47 (2016) 15-18.
  3. Combeau, M. Založnik, M. Bedel, Predictive Capabilities of Multiphysics and Multiscale Models in Modeling of Solidification of Steel Ingots and DC Casting of Aluminum, JOM 68 (2016) 2198–2206.
  4. (WP2) Guyon, Julien; Gey, Nathalie; Goran, Daniel; Chalal, Smail; Perez-Willard, Fabian, Advancing FIB assisted 3D EBSD using a static sample setup, ULTRAMICROSCOPY, 161 (2016) 161-167.
  5. (WP2) Amrei, Mohsen Mokhtabad; Monajati, Hossein; Thibault, Denis; Verreman, Yves; Germain, Lionel; Bocher, Philippe, Microstructure characterization and hardness distribution of 13Cr4Ni multipass weld metal, MATERIALS CHARACTERIZATION, 111 (2016) 128-136.
  6. (WP2-T1) Souhar, Youssef; De Felice, Valerio F.; Beckermann, Christoph; Combeau, Herve; Zaloznik, Miha, Three-dimensional mesoscopic modeling of equiaxed dendritic solidification of a binary alloy, COMPUTATIONAL MAT. SCI. 112 (2016) 304-317.
  7. (WP2-T2) Teixeira, J.; Denand, B.; Aeby-Gautier, E.; Denis, S., Simulation of coupled temperature, microstructure and internal stresses evolutions during quenching of a beta-metastable titanium alloy, MATERIALS SCI. ENG. A651 (2016) 615-625.
  8. (WP2-T2) Poletti, Cecilia; Germain, Lionel; Warchomicka, Fernando; Dikovits, Martina; Mitsche, Stefan, Unified description of the softening behavior of beta-metastable and alpha plus beta titanium alloys during hot deformation, MATERIALS SCI. ENG. A651 (2016) 280-290.
  9. (WP2-T3) Li, Zongbin; Zou, Naifu; Sanchez-Valdes, C. F.; Sanchez Llamazares, J. L.; Yang, Bo; Hu, Yong; Zhang, Yudong; Esling, Claude; Zhao, Xiang; Zuo, Liang, Thermal and magnetic field-induced martensitic transformation in Ni50Mn25-xGa25Cux (0 <= x <= 7) melt-spun ribbons, J. PHYS. D-APPL. PHYS. 49 (2016) 25002-25002.
  10. (WP2-T3) Zongbin Li, Naifu Zou, Bo Yang, Weimin Gan, Long Hou, Xi Li, Yudong Zhang, Claude Esling, Michael Hofmann, Xiang Zhao, Liang Zuo. Effect of compressive load on the martensitic transformation from austenite to 5M martensite in a polycrystalline Ni-Mn-Ga alloy studied by in-situ neutron diffraction. JOURNAL OF ALLOYS COMPOUNDS, 666 (2016) 1-9.
  11. (WP2-T3) Zongbin Li, Zhenzhuang Li, Bo Yang, Yudong Zhang, Claude Esling, Xiang Zhao, Liang Zuo. Crystallographic correlation between 5M and 7M martensite during inter-martensitic transformation in a Ni-Mn-Ga alloy. JOURNAL OF APPLIED CRYSTALLOGRAPHY. 49 (2016) 507-512.
  12. (WP2-T3) Zongbin Li, Yiwen Jiang, Zhenzhuang Li, Yiqiao Yang, Bo Yang, Yudong Zhang, Claude Esling, Xiang Zhao, Liang Zuo. Texture inheritance from austenite to 7 M martensite in Ni-Mn-Ga melt-spun ribbons. RESULTS IN PHYS. 6 (2016) 428-433.
  13. (WP2-T3) L. Yan, C.Y. Zhang, Y.D. Zhang, X.L. Wang, C. Esling, X. Zhao, L. Zuo, Crystallographic insights into Ni–Co–Mn–In metamagnetic shape memory alloys, JOURNAL OF APPLIED CRYSTALLOGRAPHY, 49 (2016) 1585-1592.
  14. (WP2-T3) L. Yan, B. Yang, Y.D. Zhang, Z.B. Li, C. Esling, X. Zhao, L. Zuo, Variant organization and mechanical detwinning of modulated martensite in Ni–Mn–In metamagnetic shape-memory alloys, ACTA MATERIALIA, 111 (2016) 75-84.
  15. (WP2-T3) Chunqing Lin, Haile Yan, Yudong Zhang, Claude Esling, Xiang Zhao, Liang Zuo, Crystal structure of modulated martensite and crystallographic correlations between martensite variants of Ni50Mn38Sn12 alloy, JOURNAL OF APPLIED CRYSTALLOGRAPHY, 49 (2016) 1276-1283.
  16. (WP2-T3) Chunyang Zhang, Haile Yan, Yudong Zhang, Claude Esling, Xiang Zhao, Liang Zuo, Crystal structure and crystallographic characteristics of martensite in Ni50Mn38Sb12 alloys, JOURNAL OF APPLIED CRYSTALLOGRAPHY, 49 (2016) 513-519.
  17. (WP2-T3) Bo Yang, Gaowu Qin, Na Xiao, Zongbin Li, Yudong Zhang, Claude Esling, Xiang Zhao, Liang Zuo, Phosphor doping enhanced c-axis alignment and exchange decoupling of sputtered Co-Pt perpendicular thin films, JOURNAL OF APPLIED CRYSTALLOGRAPHY, 119 (2016) 145304.
  18. (WP2-T4) Li Li, Tamas Ungar, Laszlo S Toth, Werner Skrotzki, Yan D Wang, Yang Ren, Hahn Choo, Zsolt Fogarassy,  Xing T Zhou,  Peter K Liaw, Shear-Coupled Grain Growth and Texture Development in a Nanocrystalline Ni-Fe Alloy during Cold Rolling, MET. TRANS. A47 (2016) 6632-6644.
  19. (WP2-T4) Special Issue: Bulk Nanostructured Materials, Guest Editors: Ruslan Z. Valiev, Yuri Estrin, S. Toth, T.C. Lowe, ADVANCED ENGINEERING MATERIALS, Vol. 12 (2015).
  20. (WP2-T4) Editorial, Bulk Nanostructured Materials, Guest-edited by Z.V. Ruslan, Y. Estrin, S. Toth, T.C. Lowe, ADVANCED ENGINEERING MATERIALS, 17 (2015) 1708-1709. 

2016, WP3:

  1. (WP3-T1) S. Devynck, Denis, J.P. Bellot, T. Benard, M. Gradeck, Influence of boiling heat transfer and phase transformations on the deformation of a steel tube during quenching by impinging water jets, J. MAT. SCI. ENG. TECH. 47 (2016), 673–788.
  2. (WP3-T1) Choi, J. Jourdan, A. Matveichev, A. Jardy, J.P. Bellot, Kinetics of Evaporation of Alloying Elements under Vacuum: Application to Ti alloys in Electron Beam Melting, J. HIGH TEMP. MAT. PROC. (2016), doi: 10.1515/htmp-2015-0220.
  3. (WP3-T1) M. Hugo, B. Dussoubs, Jardy, J. Escaffre, H. Poisson, Influence of the mould current on the Electroslag Remelting process”, MET. TRANS. B47 (2016), 2607-2622.
  4. (WP3-T2) Mirgaux, J. François, F. Patisson, From trees to electricity, the physics beyond the LCA, MATERIAUX ET TECHNIQUES, 104, 1, 106 (2016), doi: /10.1051/mattech/2016006.

2016, WP4:

  1. (WP4-T1) S. Toth, C.F. Gu, B. Beausir, J.J. Fundenberger, M. Hoffman, Geometrically necessary dislocations favor the Taylor uniform deformation mode in ultra-fine-grained polycrystals, ACTA MATERIALIA, 117 (2016) 35-42.
  2. (WP4-T1) Yan Beygelzimer , Roman Kulagin, Laszlo S. Toth, Yulia Ivanisenko, The self-similarity theory of high pressure torsion, BEILSTEIN J. NANOTECHNOL. 7 (2016) 1267–1277.
  3. (WP4-T1) Msolli S, Ben Bettaieb M, Abed-Meraim F. Combined effect of damage and plastic anisotropy on the ductility limit of thin metal sheets. PROCEDIA STRUCTURAL INTEGRITY, 2 (2016) 3577-3584
  4. (WP4-T1) Cai Chen, Yan Beygelzimer, Laszlo S. Toth, Yuri Estrin, Roman Kulagin, Tensile yield strength of a material pre-processed by simple shear, J. ENG. MAT. TECHN. 138 (2016) 031010.
  5. (WP4-T3) Amouzou, T. Richeton, A. Roth, M. Lebyodkin, T. Lebedkina, Micromechanical modeling of hardening mechanisms in commercially pure alpha-titanium in tensile condition, INTERNATIONAL JOURNAL OF PLASTICITY, 80 (2016) 222-240.
  6. (WP4-T3) A. Mogucheva, D. Yuzbekova, R. Kaibyshev, Lebedkina, M. Lebyodkin, Effect of Grain Refinement on jerky flow in an Al-Mg-Sc alloy, MET. TRANS. A47 (2016) 2093-2016.
  7. (WP4-T3) M. A. Vicente Alvarez, J. R. Santisteban, P. Vizcaino, Ribarik, T. Ungar, Quantification of dislocations densities in zirconium hydride by X-ray line profile analysis, ACTA MATERIALIA, 117 (2016) 1-12.
  8. (WP4-T3) Christopher Langrand, Nadege Hilairet, Carole Nisr, Mathieu Roskosz, Gabor Ribarik, Gavin B.M. Vaughan, Sebastien Merkel, Reliability of Multigrain Indexing for Orthorhombic Polycrystals above 1 Mbar: Application to MgSiO3 post-perovskite, JOURNAL OF APPLIED CRYSTALLOGRAPHY, 50 (2017) 120-130.
  9. (WP4-T4) ) Yasser Bouktir, Hocine Chalal, Moussa Haddad, Farid Abed-Meraim, Investigation of ductility limits based on bifurcation theory coupled with continuum damage mechanics, MATERIALS AND AND DESIGN, 90 (2016) 969-978.
  10. (WP4-T4) Xu, M. Potier-Ferry, A multi-scale modeling framework for instabilities of film/substrate systems, J. MECH. PHYS. SOLIDS, 86, pp 150-172, 2016
  11. (WP4-T4) J.M. Cadou, F. Boumediene, Y. Guevel, G. Girault, L. Duigou, M. Daya, M. Potier-Ferry, A high order reduction-correction method for Hopf bifurcation in fluids and for viscoelastic vibration, COMP. MECH., 57 (2016) 305–324.
  12. (WP4-T4)  Potier-Ferry, F. Mohri, F. Xu, N. Damil, B. Braikat, K. Mhada, H. Hu, Q. Huang, S. Nezamabadi, Cellular instabilities analyzed by multi-scale Fourier series: a review, DISCRETE AND CONTINUOUS DYNAMICAL SYSTEMS, 9 (2016) 585-597, DOI 10.1007/s00466-015-1232-4.
  13. (WP4-T4) Xu, M. Potier-Ferry, On axisymmetric/diamond-like mode transitions in axially compressed core-shell cylinders, J. MECH. PHYS. SOLIDS, 94 (2016) 68-87.

2016, WP5:

  1. (WP5-T2) Ayodele Adessina, Mohamed Hamdaoui, Chao Xu, El mostafa Daya. Damping properties of bi-dimensional sandwich structures with multi-layered frequency-dependent visco-elastic cores. COMPOSITE STRUCTURES 154 (2016) 334-343.
  2. (WP5-T2)Komlan Akoussan, Hakim Boudaoud, El Mostafa Daya, Yao Koutsawa, Erasmo Carrera. Sensitivity analysis of the damping properties of viscoelastic composite structures according to the layers thicknesses. COMPOSITE STRUCTURES 149 (2016) 11-25.
  3. (WP5-T2) Akpama HK, Ben Bettaieb M, Abed-Meraim F. Numerical integration of rate-independent BCC single crystal plasticity models: comparative study of two classes of numerical algorithms. J. NUMERICAL METHODS IN ENG., 108 (2016) 363-422.
  4. (WP5-T2) Akpama HK, Ben Bettaieb M, Abed-Meraim F. Influence of the yield surface curvature on the forming limit diagrams predicted by crystal plasticity theory, LATIN AMERICAN JOURNAL OF SOLIDS AND STRUCTURES, 13 (2016) 2231-2250.
  5. (WP5-T2) Akpama HK, Ben Bettaieb M, Abed-Meraim F. Prediction of localized necking based on crystal plasticity: Comparison of bifurcation and imperfection approaches, KEY ENG. MAT. (DOI 10.4028/www.scientific.net/KEM.716.779), 716 (2016) 779-789.
  6. (WP5-T2) Robin, M. Jrad, N. Mathieu, A. Daouadji , E.M. Daya, Temperature effects on linear and nonlinear vibrations of corrugated beams, MECHANICS RESEARCH COMMUNICATIONS, 71 (2016) 1-6.
  7. (WP5-T3) Claude Fressengeas, Vincent Taupin, A field theory of strain/curvature incompatibility for coupled fracture and plasticity, INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 82 (2016) 16-38.
  8. (WP5-T1/T4) Remi Dingreville, Stéphane Berbenni, On the interaction of solutes with grain boundaries, ACTA MATERIALIA, 104 (2016) 237-249.
  9. Book Chapter: Berbenni, V. Taupin, C. Fressengeas, L. Capolungo. A Fast Fourier Transform-based approach for Generalized disclination mechanics within a couple stress theory. Chapter 4, in “Generalized Continua as Models for Classical and Advanced Materials” (eds: H. Altenbach, S. Forest), ADVANCES STRUCTURED MATERIALS SERIES SPRINGER (ISBN 978-3-319-31719-9), pp. 47-75, 2016.

2015, WP1:

  1. (WP1) Sinha, Subhasis; Kim, Dong-Ik; Fleury, Eric; Suwas, Satyam, Effect of grain boundary engineering on the microstructure and mechanical properties of copper containing austenitic stainless steel, MATERIALS SCI. ENG. A626 (2015) 175-185.
  2. (WP1-T1) Van Landeghem, H. P.; Goune, M.; Bordere, S.; Danoix, F.; Redjaimia, A., Competitive precipitation of amorphous and crystalline silicon nitride in ferrite: Interaction between structure, morphology, and stress relaxation, ACTA MATERIALIA, 93 (2015) 218-234.
  3. (WP1-T2) Shanmugasundaram, T.; Guyon, J.; Monchoux, J. P.; Hazotte, A.; Bouzy, E., On grain refinement of a gamma-TiAl alloy using cryo-milling followed by spark plasma sintering, INTERMETALLICS, 66 (2015) 141-148.
  4. (WP1 – T2) Shanmugasundaram, T., Bouzy, E., Chokshi, A.H. Strengthening and weakening by repeated dynamic impact in microcrystals and nanocrystals, MATERIALS SCI. ENG. A, 639 (2015) 97-102.
  5. (WP1) Martin, P. Leone, A. Nominé, D. Veys-Renaux, G. Henrion, T. Belmonte Influence of electrolyte ageing on the Plasma Electrolytic Oxidation of aluminium, SURF. COAT. TECHNOL. 269 (2015) 36-46.
  6. (WP1-T3) Biswas, S.S. Dhinwal, B. Beausir, L.S. Toth, S. Suwas, Thermal Response on the Microstructure and Texture of ECAE and Cold Rolled Pure Magnesium, MET. TRANS. 46A (2015) 2598-2613.
  7. (WP1-T3) G. S. Duan, B. L. Wu, X. H. Du, G. Zhao, D. Zhang, X. Zhao, L. Zuo, C. Esling, The microstructure evolution in AZ31B alloy during multi-pass cold rolling to a high reduction, MATERIALS SCI. ENG. A, 620 (2015) 120-128.
  8. (WP1-T3) X. H. Du, M. Hong, G. S. Duan, C. B. Wei, E. P. Jiang, M. Zhang, B. L. Wu, D. Zhang, C. Esling, Excellent cold rollability in a single pass of an Mg-4Er (wt.%) alloy, INT. J. MATER. RESEARCH, 106 (2015) 15-21.
  9. (WP1-T4) Akoussan, H. Boudaoud, E-M. Daya; E. Carrera, Vibration Modeling of Multilayer Composite Structures with Viscoelastic Layers, MECH. ADV. MATER. AND STRUCTURES, 22 (2015) 136-149.
  10. (WP1-T4) Hamdaoui, G. Robin, M. Jrad, E.M. Daya. Optimal design of frequency dependent three-layered rectangular composite beams for low mass and high damping. Composite Structures, COMPOSITE STRUCTURES, 120, (2015) 174-182.
  11. (WP1-T4) Kpeky F, Boudaoud H, Abed-Meraim F, DayaM. Modeling of viscoelastic sandwich beams using solid–shell finite elements. COMPOSITE STRUCTURES, 133 (2015) 105–116.
  12. (WP1-T5) J. Zhao, R. Massion, T. Grosdidier, L.S. Toth, Gradient structure in high pressure torsion compacted iron powder, ADVANCED ENGINEERING MATERIALS, 17 (2015) 1748-1753.
  13. (WP1-T5) Acquier, P.; Lemonnier, S.; Allain-Bonnasso, N.; Rusinek, A.; Grosdidier, T.; Barraud, E., Development of the Dynamic Compaction Resistance Sintering (DCRS): A new process for powder consolidation combining electric current and dynamic loading, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 216 (2015) 447-454.
  14. (WP1-T5) Grosdidier, T.; Fundenberger, J.; Zou, J. X.; Pan, Y. C.; Zeng, X. Q., Nanostructured Mg based hydrogen storage bulk materials prepared by high pressure torsion consolidation of arc plasma evaporated ultrafine powders, INT. J. HYDROGEN ENERGY, 40 (2015) 16985-16991.

2015, WP2:

  1. (WP2) Fan, Jiangkun; Li, Jinshan; Kou, Hongchao; Hua, Ke; Tang, Bin; Zhang, Yudong, Influence of solution treatment on microstructure and mechanical properties of a near beta titanium alloy Ti-7333, MATERIALS AND DESIGN, 83 (2015) 499-507.
  2. (WP2) Liu, Xiaorui; Zhang, Yudong; Beausir, Benoit; Liu, Fang; Esling, Claude; Yu, Fuxiao; Zhao, Xiang; Zuo, Liang, Twin-controlled growth of eutectic Si in unmodified and Sr-modified Al-12.7%Si alloys investigated by SEM/EBSD, ACTA MATERIALIA, 97 (2015) 338-347.
  3. (WP2-T1) Salloum-Abou-Jaoude, G.; Reinhart, G.; Combeau, H.; Zaloznik, M.; Lafford, T. A.; Nguyen-Thi, H., Quantitative analysis by in situ synchrotron X-ray radiography of the evolution of the mushy zone in a fixed temperature gradient, JOURNAL OF CRYSTAL GROWTH, 411 (2015) 88-95.
  4. (WP2) Mansour, H.; Crimp, M. A.; Gey, N.; Maloufi, N., Accurate electron channeling contrast analysis of a low angle sub-grain boundary, SCRIPTA MATERIALIA. 109 (2015) 76-79.
  5. (WP2-T2) A2 L. Ropars, Dehmas, S. Gourdet, J. Delfosse D. Tricker, E. Aeby-Gautier, Structure evolutions in a Ti-6Al-4V matrix composite reinforced with TiB, characterised using high energy X-ray diffraction, JOURNAL OF ALLOYS AND COMPOUNDS, 624 (2015) 179-188.
  6. (WP2) Guyon, H. Mansour, N. Gey, M.A. Crimp, S. Chalal, N. Maloufi, Sub-Micron Resolution Selected Area Electron Channeling Patterns, ULTRAMICROSCOPY 149, (2015) 34-44.
  7. (WP2-T2 ) Humbert, L. Germain, N. Gey, E. Boucard, Evaluation of the orientation relations from misorientation between inherited variants: Application to ausformed martensite, ACTA MATERIALIA, 82 (2015) 137–144.
  8. (WP2-T2) D. Barbier, Germain, A. Hazotte, M. Gouné and A. Chbihi, Microstructures resulting from the interaction between ferrite recrystallization and austenite formation in dual-phase steels, JOURNAL OF MATERIALS SCIENCE, 50 (2015) 374-381.
  9. (WP2-T3) Yang, Bo; Zhang, Yudong; Li, Zongbin; Qin, Gaowu; Zhao, Xiang; Esling, Claude; Zuo, Liang, Insight into variant selection of seven-layer modulated martensite in Ni-Mn-Ga thin films grown on MgO(001) substrate, ACTA MATERIALIA, 93 (2015) 205-217.
  10. (WP2-T3) H. Yan, Y. Zhang, N. Xu, A. Senyshyn, H.-G. Brokmeier, Esling, X. Zhao, L. Zuo, Crystal structure determination of incommensurate modulated martensite in Ni-Mn-In Heusler alloys, ACTA MATERIALIA, 88 (2015) 375-388.
  11. (WP2-T3) Yang, Y. Zhang, Z.B. Li, G. Qin, C. Esling, X. Zhao, L. Zuo, Crystallographic orientation of modulated martensite in epitaxially grown Ni–Mn–Ga thin film, THIN SOLID FILMS, 584 (2015) 90-93.
  12. (WP2-T3) Zongbin Li, C. F. Sánchez-Valdés, J. L. Sánchez Llamazares, Yudong Zhang, Claude Esling, Xiang Zhao, Liang Zuo. Magnetic-Field-Induced Isothermal Entropy Change Across the Magnetostructural Transition in Ni–Mn–Ga Melt-Spun Ribbons, IEEE T. MAGN. MAGN. 51 (2015) 2501804.
  13. (WP2-T4) Biswas, Somjeet; Brokmeier, H.-G.; Fundenberger, J.-J.; Suwas, Satyam, Role of deformation temperature on the evolution and heterogeneity of texture during equal channel angular pressing of magnesium, MATERIALS CHARACTERIZATION, 102 (2015) 98-102.
  14. (WP2-T4) Gu, C.F.; Hoffman, M.; Toth, L.S.; Zhang, Y.D., Grain size dependent texture evolution in severely rolled pure copper, MATERIALS CHARACTERIZATION, 101 (2015)180-188.
  15. (WP2-T4) Cai Chen, Yan Beygelzimer, Laszlo S. Toth, Jean-Jacques Fundenberger, Microstructure and strain in protrusions formed during severe plastic deformation of aluminum, MATERIALS LETTERS, 159 (2015) 253–256.

2015, WP3:

  1. (WP3-T1) Bansal, Akshay; Chapelle, Pierre; Delannoy, Yves; Waz, Emmanuel; Le Brun, Pierre; Bellot, Jean Pierre, Experimental and Numerical Analysis of the Deformation of a Liquid Aluminum Free Surface Covered by an Oxide Layer During Induction Melting, MET. TRANS. B46 (2015) 2096-2109.
  2. (WP3-T1) Descotes, Vincent; Migot, Sylvie; Robaut, Florence; Bellot, Jean-Pierre; Perrin-Guerin, Valerie; Witzke, Sylvain; Jardy, Alain, TEM Characterization of a Titanium Nitride (TiN) Inclusion in a Fe-Ni-Co Maraging Steel, MET. TRANS. A46 (2015) 2793-2795.
  3. (WP3-T1) Bansal, Akshay; Chapelle, Pierre; Delannoy, Yves; Waz, Emmanuel; Le Brun, Pierre; Bellot, Jean Pierre, Deformation of the Aluminum Bath Surface in an Induction Melting Furnace, LIGHT METALS, BOOK SERIES, (2015) 999-1004.
  4. (WP3-T1) Hugo, Mathilde; Jardy, Alain; Dussoubs, Bernard; Escaffre, Jessica; Poisson, Henri, Mathematical Modeling of the Mold Current and its Influence on Slag and Ingot Behavior during ESR, J. MANUFACTURING SCI. AND PRODUCTION, 15 (2015), 79-88.

2015, WP4:

  1. (WP4-T1) Yan Beygelzimer, Laszlo S. Toth, John J. Jonas, Some physical characteristics of strain hardening in severe plastic deformation, ADVANCED ENGINEERING MATERIALS, 17 (2015) 1783-1791.
  2. (WP4-T1) Arman Hasani, Laszlo S. Toth, Deformation field analysis in equal channel angular extrusion of metals using asymmetric flow function, ADVANCED ENGINEERING MATERIALS 17 (2015) 1760-1772. DOI: 10.1002/adem.201500070.
  3. (WP4-T1) R. Barnett, O. Bouaziz, L.S. Toth, A microstructure based analytical model for tensile twinning in a rod textured Mg alloy, INTERNATIONAL JOURNAL OF PLASTICITY, 72 (2015) 151-167, http://dx.doi.org/10.1016/j.ijplas.2015.05.003
  4. (WP4-T1) Pardis, C. Chen, L.S. Toth, C.F. Gu, B. Beausir,  L. Kommel,   Microstructure, texture and mechanical properties of cyclic expansion-extrusion deformed pure copper, MATERIALS SCI. ENG. A, 628 (2015) 423–432.
  5. (WP4-T1) Wang, Y. Zhang, C. Schuman, J.-S. Lecomte, X. Zhao, L. Zuo, M.-J. Philippe, C. Esling, Study of twinning/detwinning behaviors of Ti by interrupted in situ tensile tests, ACTA MATERIALIA, 82 (2015) 424-436.
  6. (WP4-T1) Liu X, Zhang Y, Beausir B, Liu F, Esling C, Yu F, Zhao X, Zuo L. Twin-controlled growth of eutectic Si in unmodified and Sr-modified Al–12.7%Si alloys investigated by SEM/EBSD. ACTA MATERIALIA, 97 (2015) 338-347.
  7. (WP4-T2) Shanmugasundaram, T.; Bouzy, E.; Chokshi, A. H., Strengthening and weakening by repeated dynamic impact in microcrystals and nanocrystals, MATERIALS SCI. A, 639 (2015) 97-102.
  8. (WP4-T2) ZaeraJ.A. Rodriguez-Martinez, G. Vadillo, J. Fernández-Sáez, A. MolinariCollective behaviour and spacing of necks in ductile plates subjected to dynamic biaxial loading , J. MECH. PHYS. SOLIDS, 85 (2015) 245-269.
  9. (WP4-T3) Zhemchuzhnikova, D. A.; Lebyodkin, M. A.; Lebedkina, T. A.; Kaibyshev, R. O., Unusual behavior of the Portevin-Le Chatelier effect in an AlMg alloy containing precipitates, MATERIALS SCI. ENG. A, 639 (2015) 37-41.
  10. (WP4-T3) H. Du, M. Hong, G. S. Duan, B. L. Wu, Y. D. Zhang, C. Esling, Preparation of sound ribbons with submicrometer-grained microstructure on a Mg–Zn alloy, SCIENCE BULLETIN, 60 (2015) 570-573.
  11. (WP4-T3) M. Abobaker,  O. Bouaziz, M. Lebyodkin, T. Lebedkina, I.V. Shashkov, Avalanche dynamics in crumpled aluminum thin foils. SCRIPTA MATERIALIA. 99 (2015) 17-20.
  12. (WP4-T3) Y.P. Allain, O. Bouaziz, I. Pushkareva, C.P. Scott, Towards the microstructure design of DP steels: A generic size-sensitive mean-field mechanical model, MATERIALS SCI. ENG. 637 (2015) 222-234.
  13. (WP4-T3) Pushkareva, I.; Allain, S.; Scott, C.; Redjaïmia, A., Moulin, A., ISIJ International, IRON AND STEEL INSTITUTE OF JAPAN, 2015, 186, 1-10
  14. (WP4-T4) Xu, Fan; Koutsawa, Yao; Potier-Ferry, Michel; Belouettar, Salim, Instabilities in thin films on hyperelastic substrates by 3D finite elements, INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 69-70 (2015) 71-85.
  15. (WP4-T4) Attipou, Kodjo; Hu, Heng; Mohri, Foudil; Potier-Ferry, Michel; Belouettar, Salim, Thermal wrinkling of thin membranes using a Fourier-related double scale approach, THIN-WALLED STRUCTURES, 94 (2015) 532-544.
  16. (WP4-T4) Huang, Qun; Hu, Heng; Yu, Kun; Potier-Ferry, Michel; Belouettar, Salim; Damil, Noureddine, Macroscopic simulation of membrane wrinkling for various loading cases, INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 64-65 (2015) 246-258.
  17. (WP4-T4) Mohri, Foudil; Damil, Noureddine; Potier-Ferry, Michel, Review and comparison of finite element flexural-torsional models for non-linear behaviour of thin-walled beams, ADVANCES IN ENGINEERING SOFTWARE, 80 (2015) 174-187.
  18. (WP4-T4) K. Yu, Hu, H. Tang, G. Giunta, M. Potier-Ferry, S. Belouettar, A novel two-dimensional finite element to study the instability phenomena of sandwich plates, COMPUTER METHODS IN APPL. MECH. AND ENG. 283 (2015) 1117-1137.
  19. (WP4-T4) J. Yang, Q. Huang, Hu, G. Giunta, S. Belouettar, M. Potier-Ferry, A new family of finite elements for wrinkling analysis of thin films on compliant substrates, COMPOSITE STRUCTURES, 119 (2015) 568–577.
  20. (WP4-T4) Chalal , N. Damil , M. Potier-Ferry: Review and comparison of finite element flexural–torsional models for non-linear behaviour of thin-walled beams, ADVANCES IN ENGINEERING SOFTWARE, 80 (2015) 174–187.
  21. (WP4-T4) Ben Bettaieb, F. Abed-Meraim, Investigation of localized necking in substrate-supported metal layers: Comparison of bifurcation and imperfection analyses, INTERNATIONAL JOURNAL OF PLASTICITY, 65 (2015) 168-190.
  22. (WP4-T4) Chalal H, Abed-Meraim Hardening effects on strain localization predictions in porous ductile materials using the bifurcation approach. MECHANICS OF MATERIALS, 91, Part 1 (2015) 152–166.
  23. (WP4-T4) S. Abdelkhalek, Zahrouni, N. Legrand, M. Potier-Ferry. Post-buckling modeling for strips under tension and residual stresses using asymptotic numerical method.  INT. J. MECH. SCI., 104 (2015) 126-137

2015, WP5:

  1. (WP5-T1) Xu, N.; Raulot, J. M.; Li, Z. B.; Bai, J.; Yang, B.; Zhang, Y. D.; Meng, X. Y.; Zhao, X.; Zuo, L.; Esling, C., Composition-dependent structural and magnetic properties of Ni-Mn-Ga alloys studied by ab initio calculations, JOURNAL OF MATERIALS SCIENCE, 50 (2015) 3825-3834.
  2. (WP5-T2) Nezamabadi, Saeid; Potier-Ferry, Michel; Zahrouni, Hamid; Yvonnet, Julien, Compressive failure of composites: A computational homogenization approach, COMPOSITE STRUCTURES, 127 (2015) 60-68.
  3. (WP5-T2) K. Akoussan, H. Boudaoud, M. Daya, E. Carrera, Vibration modeling of multilayers composite structures with viscoelastic layers, MECH. ADV. MATER. AND STRUCTURES, 22 (2015) 136-149 .
  4. Boumediene, E.M. Daya, J.M. Cadou, L. Duigou, Forced harmonic response of viscoelastic sandwich beams by a reduction method. MECH. ADV. MATER. AND STRUCTURES, 23 (2015) 1290-1299. DOI:10.1080/15376494.2015.1068408.
  5. (WP5-T3) Djaka, K. S.; Taupin, V.; Berbenni, S.; Fressengeas, C., A numerical spectral approach to solve the dislocation density transport equation, MODELLING AND SIMULATION IN MATER. SCI. ENG. 23 (2015) 065008.
  6. (WP5-T4) Juan, P. A.; Pradalier, C.; Berbenni, S.; McCabe, R. J.; Tome, C. N.; Capolungo, L., A statistical analysis of the influence of microstructure and twin-twin junctions on twin nucleation and twin growth in Zr, ACTA MATERIALIA, 95 (2015) 399-410.
  7. (WP5-T4) Shi, Zhang-Zhi; Zhang, Yudong; Wagner, Francis; Richeton, Thiebaud; Juan, Pierre-Alexandre; Lecomte, Jean-Sebastien; Capolungo, Laurent; Berbenni, Stephane, Sequential double extension twinning in a magnesium alloy: Combined statistical and micromechanical analyses, ACTA MATERIALIA, 96 (2015) 333-343.
  8. (WP5-T4) Richeton, I. TibaS. Berbenni, O. Bouaziz, Analytical expressions of incompatibility stresses at Sigma3 <111> twin boundaries and consequences on single slip promotion parallel to twin plane, PHIL. MAG. 95 (2015) 12-31.
  9. (WP5-T4) Z.-Z. Shi, Zhang, F. Wagner, P.-A. Juan, S. Berbenni, L. Capolungo, J.-S. Lecomte, T. Richeton, On the selection of extension twin variants with low Schmid factors in a deformed Mg alloy, ACTA MATERIALIA, 83 (2015) 17-28.
  10. (WP5-T4) C. Mareau, Berbenni, An affine formulation for the self-consistent modeling of elasto-viscoplastic heterogeneous materials based on the translated field method. INTERNATIONAL JOURNAL OF PLASTICITY, 64 (2015) 134-150.
  11. (WP5-T5) Bedel, M.; Tveito, K. O.; Zaloznik, M.; Combeau, H.; M’Hamdi, M., A model study of the impact of the transport inoculant particles on microstructure formation during solidification, COMPUTATIONAL MAT. SCI. 102 (2015) 95-10.

2014, WP1:

  1. (WP1 – T2) Morawiec, A., Bouzy, E., Paul, H., Fundenberger J.J. Orientation precision of TEM-based orientation mapping techniques, ULTRAMICROSCOPY, 136 (2014) 107-118.
  2. (WP1-T5) J.X. Zou, C.F. Pérez-Brokate, Arruffat, B. Bolle, J.J. Fundenberger, X.Q. Zeng, T. Grosdidier, W.J. Ding, Nanostructured bulk Mg + MgO composite synthesized through arc plasma evaporation and high pressure torsion for H-storage application, MATERIALS SCI. ENG. B, 183 (2014) 1–5.
  3. (WP1–T4) Y. Samih, G. Marcos, N. Stein, Allain, E. Fleury, C. Dong, T. Grosdidier, Microstructure modifications and associated hardness and corrosion improvements in the AISI 420 martensitic stainless steel treated by high current pulsed electron beam (HCPEB), SURFACE AND COATINGS TECHNOLOGY, 259 (2014) 737-745.

2014, WP2:

  1. (WP2-T1) V.A. Esin, Souhar, Solvent grain boundary diffusion in binary solid solutions: a new approach to evaluate solute grain boundary segregation, PHIL. MAG. 94 (2014) 4066-4079.
  2. (WP2) Mansour, J. Guyon, M.A. Crimp, N. Gey, B. Beausir, N. Maloufi, Accurate electron channeling contrast analysis of dislocations in fine grained bulk materials, SCRIPTA MATERIALIA. 89 (2014) 77-78.
  3. (WP2-T2) C. Buirette, J. Huez, Gey, A. Vassel, E. Andrieu, Study of crack propagation mechanisms during Charpy impact toughness tests on both equiaxed and lamellar microstructures of Ti-6Al-4V titanium alloy, MATERIALS SCI. ENG. A, 618 (2014) 546-557.
  4. (WP2-T2) A. Chbihi, D. Barbier, Germain, A. Hazotte, M. Goune, Interactions between ferrite recrystallization and austenite formation in high-strength steels, JOURNAL OF MATERIALS SCIENCE, 49 (2014) 3608-3621.
  5. (WP2-T2) F.Z. Bedia, A. Bedia, Maloufi, M. Aillerie, F. Genty, B. Benyoucef, Effect of tin doping on optical properties of nanostructured ZnO thin films grown by spray pyrolysis technique, JOURNAL OF ALLOYS AND COMPOUNDS, 616 (2014) 312-318.
  6. (WP2-T2) V.A. Esin, B. Denand, Q. Le Bihan, Dehmas, J. Teixeira, G. Geandier, S. Denis, T. Sourmail, E. Aeby-Gautier, In situ synchrotron X-ray diffraction and dilatometric study of austenite formation in a multi-component steel: Influence of initial microstructure and heating rate, ACTA MATERIALIA, 80 (2014) 118-131.
  7. (WP2-T2) J. Ruiz-Vargas, Siredey-Schwaller, P. Noyrez, S. Mathieu, P. Bocher, N. Gey, Potential and limitations of microanalysis SEM techniques to characterize borides in brazed Ni-based superalloys, MATERIALS CHARACTERIZATION, 94 (2014) 46-57.
  8. (WP2-T2) G. Singh, S-M. Hong, K. Oh-ishi, K. Hono, Fleury, U. Ramamurty, Enhancing the high temperature plasticity of a Cu-containing austenitic stainless steel through grain boundary strengthening, MATERIALS SCI. ENG. A, 602 (2014) 77-88.
  9. (WP2-T2) Vautrot, G. Geandier, M. Mourot, M. Dehmas, E. Aeby-Gautier, B. Denand, S. Denis, Internal stresses in Metal Matrix Composites in relation with matrix phase transformations, ADV. MAT. RESEARCH, 996 (2014) 944-950.
  10. (WP2-T2) Geandier, L. Vautrot, M. Salib, M. Mourot, M. Dehmas, B. Denand, E. Aeby-Gautier, S. Denis, Microstructural evolution and strain development in Metal Matrix Composites, ADV. MAT. RESEARCH, 996 (2014) 936-943.
  11. (WP2-T2) Germain, D. Kratsch, M. Salib, N. Gey, Identification of sub-grains and low angle boundaries beyond the angular resolution of EBSD maps, MATERIALS CHARACTERIZATION, 98 (2014) 66–72.
  12. (WP2-T3) Z. Li, Zhang, C.F. Sánchez-Valdés, J.L. Sánchez-Llamazares, C. Esling, X. Zhao, L. Zuo, Giant magnetocaloric effect in melt-spun Ni-Mn-Ga ribbons with magneto-multistructural transformation, APPL. PHYS. LETT., 104 (2014) 044101.
  13. (WP2-T3) Li, Z. Li, Y. Zhang, C. Esling, H. Liu, Z. Zhao, Q. Zhu, Y. Zuo, J. Cui, Crystallographic effect of a high magnetic field on a solidified hypoeutectic Zn-Al alloy, JOURNAL OF APPLIED CRYSTALLOGRAPHY, 47 (2014) 606-612.
  14. (WP2-T3)P. Hou, Y. Li, Y.D. Zhang, K.M. Wu, Magnetic Field-Induced Precipitation Behaviors of Alloy Carbides M2C, M3C, and M6C in a Molybdenum-Containing Steel, MET. TRANS. A, 45 (2014) 2553-2561.
  15. (WP2-T3) Li, Bo Yang, Y. Zhang, C. Esling, N. Zou, X. Zhao, Z. Liang, Crystallographic insights into the intermartensitic transformation in Ni-Mn-Ga alloys, ACTA MATERIALIA, 74 (2014) 9-17.
  16. (WP2-T3) Li, Y. Zhang, C. Esling, W. Gan, N. Zou, X. Zhao, L. Zuo, In-situ neutron diffraction study of martensitic variant redistribution in polycrystalline Ni-Mn-Ga alloy under cyclic thermo-mechanical treatment, APPL. PHYS. LETT., 105 (2014) 021907.
  17. (WP2-T4) B. Li, Y.D. Zhang, C. F. Sanchez-Valdes, J.L.S Sanchez Llamazares, C. Esling, X. Zhao, L. Zuo, Giant magnetocaloric effect in melt-spun Ni-Mn-Ga ribbons with magneto-multistructural transformation, APPL. PHYS. LETT., 104 (2014) Article Number: 044101.
  18. (WP2-T4) S. Toth, C.F. Gu, Ultrafine-grain metals by severe plastic deformation, A tutorial review, MATERIALS CHARACTERIZATION, http://dx.doi.org/10.1016/j.matchar.2014.02.003.
  19. (WP2-T4) Nima Pardis, Cai Chen, Mehrdad Shahbaz, Ramin Ebrahimi, Laszlo S. Toth, Development of new routes of severe plastic deformation through cyclic expansion-extrusion process, MATERIALS SCI. ENG. A, 613 (2014) 357-374.

2014, WP3:

  1. (WP3-T1, WP2-T1) M. Revil-Baudard, Jardy, H. Combeau, F. Leclerc, V. Rebeyrolle, Solidification of a vacuum arc remelted zirconium ingot, MET. TRANS. B45 (2014) 51-57.
  2. (WP3-T1) Chapelle, C. Noel, A. Risacher, J. Jourdan, A. Jardy, J. Jourdan, Optical investigation of the behavior of the electric arc and the metal transfer during vacuum remelting of a Ti alloy, J. MAT. PROC. TECHN. 214 (2014) 2268-2275.
  3. (WP3-T1) P. Bellot, V. De Felice, B. Dussoubs, A. Jardy, S. Hans, Coupling of CFD and PBE Calculations to Simulate the Behavior of an Inclusion Population in a Gas-Stirring Ladle, MET. TRANS., B45 (2014) 13-21.
  4. (WP3-T2) G. Fick, Mirgaux, P. Neau, F. Patisson, Using biomass for pig iron production: a technical, environmental and economical assessment, WASTE AND BIOMASS VALORIZATION, 5 (2014) 43-55. 
  5. (WP3-T2) J. François, M. Fortin, H. Wernsdorfer, Patisson, A. Dufour, Assessing the fate of nutrients and carbon in the bioenergy chain through the modeling of biomass growth and conversion, ENVIRON. SCI. TECHNOL. 48 (2014) 14007−14015.
  6. (WP3-T2) L. De Almeida, S. Grandjean, M. Rivenet, Patisson, F. Abraham, Hydrazinium lanthanide oxalates: synthesis, structure and thermal reactivity of N2H5[Ln2(C2O4)4(N2H5)].4H2O, Ln = Ce, Nd, DALTON TRANSACTIONS, 43 (2014), 4680–4688.

2014, WP4:

  1. (WP4-T1) J. Beyerlein, J.S. Carpenter, A. Hunter, L.S. Toth, W. Skrotzki, ” Nano-enabled orientation alignment via extreme shear strains”, SCRIPTA MATERIALIA. 98 (2015) 52-55.
  2. (WP4-T1)H. Du, G.S. Duan, M. Hong, D.P. Wang, B.L. Wu, Y.D. Zhang, C. Esling, Effect of V on the microstructure and mechanical properties of Mg-10Er-2Cu alloy with a long period stacking ordered structure, MATERIALS LETTERS, 122 (2014) 312-314.
  3. (WP4-T1) Wagner, A. Ouarem, C.F. Gu, N. Allain-Bonasso, L.S. Toth, A new method to determine plastic deformation at the grain scale, MATERIALS CHARACTERIZATION, 92 (2014) 106-117.
  4. (WP4-T1) Pougis, L.S. Toth, J.J. Fundenberger, A. Borbely, Extension of the Derby-relation to metals severely deformed to their steady-state ultrafine-grain size, SCRIPTA MATERIALIA. 72-73 (2014) 59-62.
  5. (WP4-T1) J.J. Jonas, F. Montheillet, S. Toth, C. Ghosh, Effects of Varying Twist and Twist Rate Sensitivities on the Interpretation of Torsion Testing Data, MATERIALS SCI. ENG. A, 591 (2014) 9-17.
  6. (WP4-T1) F. Gu, L.S. Toth, M. Hoffman, Twinning effects in a polycrystalline magnesium alloy under cyclic deformation, ACTA MATERIALIA, 62 (2014) 212–224.
  7. (WP4-T1) G.S. Duan, B.L. Wu, X.H. Du, X. Zhao, D. Zhang, L. Zuo, C. Esling, Nanostructured extension twins in rapidly compressed Mg-3.0Al-1.0Zn alloy, MATERIALS SCI. ENG. A, 614 (2014) 75-80.
  8. (WP4-T1) D. Orlov, R. Lapovok, S. Toth, I.B. Timokhina, P.D. Hodgson, A. Haldar, D. Bhattacharjee, Asymmetric rolling of interstitial-free steel using differential roll diameters, Part II: Microstructure and annealing effects, MET. TRANS. A45 (2014) 447-454, DOI 10.1007/s11661-013-1958-6.
  9. (WP4-T1) F. Gu, L.S. Toth, S. Rusz, M. Bova, Texture induced grain coarsening in severe plastic deformed low carbon steel, SCRIPTA MATERIALIA. 86 (2014) 36-39.
  10. (WP4-T1) J. Jonas, C. Ghosh, L.S. Toth, The Equivalent Strain in High Pressure Torsion, MATERIALS SCI. ENG. A, 607C (2014) 530-535.
  11. (WP4-T1) S Duan, B.L. Wu, X.H. Du, X. Zhao, Y.D. Zhang, L. Zuo, C. Esling, The cyclic frequency sensitivity of low cycle fatigue (LCF) behavior of the AZ31B magnesium alloy, MATERIALS SCI. ENG. A, 603 (2014) 11-22.
  12. (WP4-T1) F. Gu, L.S. Toth, Y.D. Zhang, M. Hoffman, Unexpected brass-type texture in rolling of ultrafine-grained copper, SCRIPTA MATERIALIA. 92 (2014) 51-54.
  13. (WP4-T3) Roth, M.A. Lebyodkin, T.A. Lebedkina, J.S. Lecomte, T. Richeton, K.E.K. Amouzou, Mechanisms of anisotropy of mechanical properties of titanium in tension conditions, MATERIALS SCI. ENG. A, 596 (2014) 236-243.
  14. (WP4-T3) A. Lebedkina, M.A. Lebyodkin, T.T. Lamark, M. Janecek, Y. Estrin, Effect of equal channel angular pressing on the Portevin-Le Chatelier effect in an Al3Mg Alloy, MATERIALS SCI. ENG. A, 615 (2014) 7-13.
  15. (WP4-T4) Damil, M. Potier-Ferry, H. Hu, Membrane wrinkling revisited from a multi-scale point of view, ADV. MODELING AND SIMULATION IN ENG. SCI. 1:6, 2014.
  16. (WP4-T4) A. Tri, Zahrouni, M. Potier-Ferry, Bifurcation indicator based on meshless and asymptotic numerical methods for nonlinear Poisson problem, NUMERICAL METHODS FOR PARTIAL DIFFERENTIAL EQUATIONS, 30 (2014) 978–993.
  17. (WP4-T4) Z. Mansouri, H. Chalal, F. Abed-Meraim, Ductility limit prediction using a GTN damage model coupled with localization bifurcation analysis, MECHANICS OF MATERIALS, 76 (2014) 64-92.
  18. (WP4-T4) G. Franz, Abed-Meraim, M. Berveiller, Effect of Microstructural and Morphological Parameters on the Formability of BCC Metal Sheets, STEEL RESEARCH INT. 85 (2014) 980-987. DOI: 10.1002/srin.201300166.
  19. (WP4-T4) F. Xu, Hu, M. Potier-Ferry, S. Belouettar, Bridging techniques for pattern formation modelling, INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 51 (2014) 3119–3134.
  20. (WP4-T4) F. Xu, Hu, M. Potier-Ferry, 3D finite element modeling for instabilities in thin films on soft substrates, INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 51 (2014) 3619–3632.

2014, WP5:

  1. (WP5-T1) N. Xu, J-M. Raulot, B. Li, Y.D. Zhang, J. Bai, W. Peng, X.Y. Meng, X. Zhao, L. Zuo, C. Esling, Composition dependent phase stability of Ni-Mn-Ga alloys studied by ab initio calculations, JOURNAL OF ALLOYS AND COMPOUNDS, 614 (2014) 126-130.
  2. (WP5-T2) F.  Boumediene, J-M. Cadou, L. Duigou, E-M. Daya, A Reduction Model for Eigensolutions of Damped Viscoelastic Sandwich Structures, MECH. RESEARCH COMM. 57 (2014) 74-81.
  3. (WP5-T2) Soho K, Abed-Meraim F, Lemoine X, Zahrouni H. Multiscale finite element simulation of forming processes based on crystal plasticity. KEY ENG. MAT. 611-612 (2014) 545–552.
  4. (WP5-T4) Richeton, S. Berbenni, From bicrystals to spherical inclusions: a superposition method to derive analytical expressions of stress fields in presence of plastic strain gradients, INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 51 (2014) 794–807.
  5. (WP5-T3) Fressengeas, V. Taupin, A field theory of distortion incompatibility for coupled fracture and plasticity, J. MECH. PHYS. SOLIDS, 68 (2014) 45–65.
  6. (WP5-T3) Berbenni, V. Taupin, K.S. Djaka, C. Fressengeas, A numerical spectral approach for solving elasto-static field dislocation and g-disclination mechanics, INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 51 (2014) 4157–4175.
  7. (WP5-T1/T4) Dingreville, A. Hallil, S. Berbenni, From coherent to incoherent mismatched interfaces: A generalized continuum formulation of surface stresses, J. MECH. PHYS. SOLIDS, 72 (2014) 40-60.
  8. (WP5-T4) Berbenni, F. Wagner, N. Allain-Bonasso, On the roles of grain size dispersion and microscale Hall-Petch Relation on the plastic behaviour of polycrystalline metals, MATER. TRANS. – THE JAPAN INSTITUTE OF METALS, 55 (2014) 39-43.
  9. (WP5-T4) A. Juan, S. Berbenni, M.R. Barnett, C.N. Tome, L. Capolungo, A double inclusion homogenization scheme for polycrystals with hierarchal topologies: application to twinning in Mg alloys, INTERNATIONAL JOURNAL OF PLASTICITY, 60 (2014) 182-196.

2013-WP1:

  1. (WP1-T1) H.P. Van Landeghem, M. Gouné, T. Epicier, Redjaïmia, Unexpected low-temperature crystallization of amorphous silicon nitride into α-Si3N4 in a ferritic Fe-Si matrix, SCRIPTA MATERIALIA. 68 (2013) 187–190, DOI: http://dx.doi.org/10.1016/j.scriptamat.2012.10.014.
  2. (WP1-T2) Guyon, A. Hazotte, J.P. Monchoux, E. Bouzy, Effect of powder state on spark plasma sintering of TiAl alloys, INTERMETALLICS, 34 (2013) 94-100.
  3. V. Landeghem, M. Gouné, T. Epicier, A. Redjaïmia, Unexpected transition from amorphous silicon nitride to crystalline α-Si3N4 in a ferritic Fe-Si matrix, SCRIPTA MATERIALIA. 68 (2013) 187–190.
  4. (WP1-T3) Biswas, B. Beausir, L. S. Toth, S. Suwas, Evolution of texture and microstructure during hot torsion of a magnesium alloy, ACTA MATERIALIA, 61 (2013) 5263-5277.
  5. (WP1-T3) S. Toth, S. Biswas, C.F. Gu, B. Beausir, Notes on representing grain size distributions obtained by electron backscatter diffraction, MATERIALS CHARACTERIZATION, 84 (2013) 67-71.
  6. (WP1-T3) M. Gallouze, Kellou, D. Hamoutene, T. Grosdidier, M. Drir, Absorption and adsorption of hydrogen in B2-FeA1: Ab initio study, PHYSICA B-CONDENSED MATTER, 416 (2013) 1-7.
  7. (WP1-T5) D. Sornin, Grosdidier, J. Malaplate, I. Tiba, P. Bonnaillie, N. Allain-Bonasso, D. Nunes, Microstructural study of an ODS stainless steel obtained by Hot Uni-axial Pressing, J. NUCLEAR MATERIALS, 439 (2013) 19-24.

2013-WP2:

  1. (WP2-T1) Siredey-Schwaller, J. Ruiz-Vargas, P. Bocher, Alain Hazotte, First Melting Stages During Isothermal Brazing of Ni/Bni-2 Couples, J. MAT. PROC. TECHN. 213 (2013) 2074-2080.
  2. (WP2-T1) Ruiz-Vargas, N. Siredey-Schwaller, N. Gey, P. Bocher, A. Hazotte, Microstructure development during isothermal brazing of Ni/BNi-2 couples, J. MAT. PROC. TECHN. 213 (2013) 20–29.
  3. (WP2-T1-WP5-T5) A. Kumar, Založnik, H. Combeau, B. Goyeau, D. Gobin, Numerical simulation of columnar solidification: influence of inertia on channel segregation, MODELLING AND SIMULATION IN MAT. SCI. ENG. 21 (2013) 045016.
  4. (WP2-T2) Salib, J. Teixeira, L.  Germain, E. Lamielle, N. Gey, E. Aeby-Gautier, Influence of transformation temperature on microtexture formation associated with alpha precipitation at beta grain boundaries in a beta metastable titanium alloy, ACTA  MATERIALIA, 61 (2013) 3758-3768.
  5. (WP2-T3) B. Li, N. Xu, Y.D. Zhang, C. Esling, J-M Raulot, X. Zhao, L. Zuo, Composition-dependent ground state of martensite in Ni-Mn-Ga alloys, ACTA MATERIALIA, 61 (2013) 3858-3865.
  6. (WP2-T3) H. Zenasni, H.I. Faraoun, Esling, First-principle prediction of half-metallic ferrimagnetism in Mn-based full-Heusler alloys with highly ordered structure, J. MAGN. MAGN. MATER., 333 (2013) 162-168.
  7. (WP2-T3) Li, Y. D. Zhang, C. Esling, K. Qin, Z. Zhao, Y. Zuo, Jianzhong Cui, A microstructural and crystallographic investigation of the precipitation behaviour of a primary Al3Zr phase under a high magnetic field, JOURNAL OF APPLIED CRYSTALLOGRAPHY, 46 (2013), 421-429, doi:10.1107/S0021889813001258 (2013).
  8. (WP2-T3) B. Yang, B. Li, Y.D. Zhang, G.W. Qin, C. Esling, O. Perroud, X. Zhao, L. Zuo, Microstructural features and orientation correlations of non-modulated martensite in Ni-Mn-Ga expitaxial thin films, ACTA MATERIALIA, 61 (2013) 6809-6820.
  9. (WP2-T3) J.S. Wang, B. Yang, L. Pei, G.W. Qin, Y. ZhangC. Esling, X. Zhao, L. Zuo, Structural and magnetic properties of L1(0)-FePt/Fe exchange coupled nano-composite thin films with high energy product, J. MAGN. MAGN. MATER., 345 (2013) 165-170.
  10. (WP2-T3) X.X. Zhang, N. Xu, S.J. Wang, D. Zhang, J-M. Raulot, C. Esling, X. Zhao, L. Zuo, Magnetic-field-enhanced carbon solution in proeutectoid ferrite, J. PHYS. D: APPL. PHYS. 46 (2013) 385002 (4pp).
  11. (WP2-T4) F. Gu, L.S. Toth, D.P. Field, J.J. Fundenberger, Y.D. Zhang, Room temperature equal channel angular pressing of a magnesium alloy, ACTA MATERIALIA, 61 (2013) 3027-3036.
  12. (WP2-T4) K.M. Zhang, J.X. Zou, Grosdidier, Nanostructure Formations and Improvement in Corrosion Resistance of Steels by Means of Pulsed Electron Beam Surface Treatment, J. NANOMATERIALS, 2013, 78568-78568.
  13. (WP2-T4) K.M. Zhang, J.X. Zou, Bolle, T. Grosdidier, Evolution of residual stress states in surface layers of an AISI D2 steel treated by low energy high current pulsed electron beam, VACUUM, 87 (2013) 60-68.
  14. (WP2-T4) S. Toth, C.F. Gu, Modeling of disorientation axis distribution in severely deformed copper, SCRIPTA MATERIALIA. 69 (2013) 183–186.
  15. (WP2-T4) S.Z. Hao, Zhang, Y. Xu, N. Gey, T. Grosdidier, C. Dong, WC/Co composite surface structure and nano graphite precipitate induced by high current pulsed electron beam irradiation, APPLIED SURFACE SCIENCE, 285 (2013) 552-556.
  16. (WP2-T4) Samih Y, Beausir B, Bolle B, Grosdidier T, In-depth quantitative analysis of the microstructures produced by Surface Mechanical Attrition Treatment (SMAT), MATERIALS CHARACTERIZATION, 83 (2013) 129-138.
  17. (WP2-T4) X. Zou, K.M. Zhang, T. Grosdidier, C. Dong, Analysis of the evaporation and re-condensation processes induced by pulsed beam treatments, INT. J. HEAT AND MASS TRANSFER, 64 (2013) 1172-1182.
  18. (WP2-T4) Y. Xu, Zhang, S.Z. Hao, O. Perroud, M.C. Li, H.H. Wang, T. Grosdidier, C. Dong, Surface microstructure and mechanical property of WC-6% Co hard alloy irradiated by high current pulsed electron beam, APPLIED SURFACE SCIENCE, 279 (2013) 137-141.

2013-WP3:

  1. (WP3-T1) Jardy, Numerical simulation and experimental investigation of remelting processes. THE PATON WELDING JOURNAL, 10-11 (2013) 86-91.
  2. (WP3-T1) P. Bellot, V. Descotes, A. Jardy, Numerical modeling of inclusion behavior in liquid metal processing, JOURNAL OF METALS, 65 (2013) 1164-1172.
  3. (WP3-T1, WP2-T1) Jardy, P. Chapelle, A. Malik, J.P. Bellot, H. Combeau, B. Dussoubs, Arc behaviour and cathode melting process during VAR : an experimental and numerical study, ISIJ INT. 53 (2013) 213-220.
  4. (WP3-T1) A. Risacher, Chapelle, A. Jardy, J. Escaffre, H. Poisson, Electric current partition during vacuum arc remelting of steel: an experimental study, J. MAT. PROC. TECHN. 213 (2013) 291-299.
  5. (WP3-T1) Y. Doh, Chapelle, A. Jardy, G. Djambazov, K. Pericleous, G. Ghazal, P. Gardin, Towards a full simulation of the Basic Oxygen Furnace: deformation of the bath free surface and coupled transfer processes associated with the post-combustion in the gas region, MET. TRANS., 44B (2013) 653-670.
  6. (WP3-T2) A. Ranzani Da Costa, D. Wagner, Patisson, Modelling a new, low CO2 emissions, hydrogen steelmaking process, J. CLEANER PRODUCTION, 46 (2013) 27-35.

2013-WP4:

  1. (WP4-T1) B.L. Wu, G. Wan, X.H. Du, D. Zhang, F. Wagner, C. Esling, The quasi-static mechanical properties of extruded binary Mg-Er alloys, MATERIALS SCI. ENG. A573 (2013) 205-214.
  2. (WP4-T1) L. Bao, Zhang, C. Schuman, J-S. Lecomte, M-J. Philippe, X. Zhao, C. Esling, Multiple twinning in pure hexagonal close-packed titanium, JOURNAL OF APPLIED CRYSTALLOGRAPHY, 46 (2013) 1397-1406.
  3. (WP4-T1) E.E. Patterson, P. Field, Y. Zhang, Characterization of twin boundaries in an Fe-17.5Mn-0.56C twinning induced plasticity steel, MATERIALS CHARACTERIZATION, 85 (2013), 100-110.
  4. (WP4-T1) D. Orlov, Pougis, R. Lapovok, L.S. Toth, I.B. Timokhina, P.D. Hodgson, A. Haldar, D. Bhattacharjee, Asymmetric rolling of interstitial-free steel using differential roll diameters. Part I: Mechanical properties and deformation textures, MET. TRANS. A44 (2013) 4346-4359, DOI 10.1007/s11661-013-1791-y.
  5. (WP4-T1) Pougis, S. Philippon, R. Massion, L. Faure, J-J. Fundenberger, L.S. Toth, Dry friction of steel under high pressure in quasi-static conditions, TRIBOLOGY INT. 67 (2013) 27-35.
  6. (WP4-T1) W. Skrotzki, A. Eschke, B. Joni, T. Ungar, S. Toth, Y. Ivanisenko, L. Kurmanaeva, New experimental insight into the mechanisms of nanoplasticity, ACTA MATERIALIA, 61 (2013) 7271–7284.
  7. (WP4-T1) Geng, X. Du, B. Wu, Y. Wang, Y.D. Zhang, C. Esling, Low cycle fatigue behavior under asymmetric loading of two AZ31B magnesium alloys with different microstructures and textures, INT. J. MAT. RESEARCH, 104 (2013) 966-973.
  8. (WP4-T2) P.A. Romero, G. Anciaux, Molinari, J.F. Molinari, Insights into the thermo-mechanics of orthogonal nanometric machining, COMPUTATIONAL MAT. SCI., 72 (2013) 116-126.
  9. (WP4-T2) H. Miguélez, X. Soldani, A. Molinari, Analysis of adiabatic shear banding in orthogonal cutting of Ti alloy, INT. J. MECH. SCI. 75 (2013) 212–222.
  10. (WP4-T2) Molinari, X. Soldani, M.H. Miguélez, Adiabatic shear banding and scaling laws in chip formation with application to cutting of Ti–6Al–4V, J. MECH. PHYS. SOLIDS, 61 (2013) 2331–2359.
  11. (WP4-T3) Dirand, A. Jacques, J. Chateau-Cornu, T. Schenk, O. Ferry, P. Bastie, Phase-specific high temperature creep behaviour of a pre-rafted Ni-based superalloy studied by X-ray synchrotron diffraction, PHIL. MAG. 93 (2013) 1384–1412.
  12. (WP4-T3) Dirand, Jonathan Cormier, A. Jacques, J. P. Chateau-Cornu, T. Schenk, O. Ferry, P. Bastie, Measurement of the effective γ/γ′ lattice mismatch during high temperature creep of Ni-based single crystal superalloy, MATERIALS CHARACTERIZATION, 77 (2013) 32–46.
  13. (WP4-T3) A. Lebyodkin, I.V. Shashkov, T.A. Lebedkina, K. Mathis, P. Dobron, F. Chmelik, Role of superposition of dislocation avalanches on the statistics of acoustic emission during plastic deformation, PHYS. REV. E, 88 (2013) 042402.
  14. (WP4-T4) Damil, M. Potier-Ferry, H. Hu, New nonlinear multiscale models for wrinkled membranes, COMPTES RENDUS MECANIQUE, 341 (2013) 616–624.
  15. (WP4-T4) Tampango, M. Potier-Ferry, Y. Koutsawa, S. Tiem, Coupling of polynomial approximations with application to a boundary meshless method, INT. J. NUM. METHODS IN ENG. 95 (2013) 1094–1112.
  16. (WP4-T4) G. Franz , Abed-Meraim, M. Berveiller, Strain localization analysis for single crystals and polycrystals: Towards microstructure-ductility linkage, INTERNATIONAL JOURNAL OF PLASTICITY, 48 (2013) 1-33.
  17. (WP4-T4) G. Franz , Abed-Meraim, T. Ben Zineb, Effect of microstructural and physical mechanisms on mechanical properties of single-phase steels, ADV. SCI. LETTERS, 19 (2013) 346-350.
  18. (WP4-T4) G. Franz, Abed-Meraim, M. Berveiller, Impact of intragranular substructure parameters on the forming limit diagrams of single-phase B.C.C. steels, MATERIALS, 6 (2013) 5217-5233.

2013-WP5:

  1. (WP5-T1) Bai, N. Xu, J-M. Raulot, Y.D. Zhang, C. Esling, X. Zhao, L. Zuo, Defect formation energy and magnetic properties of off-stoichiometric Ni-Mn-In alloys by first-principles calculations, J. APPL. PHYS. 113 (2013) 174901.
  2. (WP5-T1) M. Salib, Teixeira, L. Germain, E. Lamielle, N. Gey, E. Aeby-Gautier, Influence of transformation temperature on microtexture formation associated with alpha precipitation at beta grain boundaries in a beta metastable titanium alloy, ACTA MATERIALIA, 61 (2013) 3758-3768.
  3. (WP5-T1) H.I. Faraoun, F.Z. Abderrahim, Esling, First principle calculations of MAX ceramics Cr2GeC, V2GeC and their substitutional solid solutions, COMPUTATIONAL MAT. SCI. 74 (2013) 40-49.
  4. (WP5-T2) Attipou, S. Nezamabadi, E-M. Daya, H. Zahrouni, A multiscale approach for the vibration analysis of heterogeneous materials: Application to passive damping, J. SOUND AND VIBRATION, 332 (2013) 725-739.
  5. (WP5-T2) L. Azoti, A. Tchalla, Y. Koutsawa, A. Makradi, G. Rauchs, S. Belouettar, H. Zahrouni,  Mean-field constitutive modeling of elasto-plastic composites using  two incremental formulations, COMPOSITE STRUCTURES, 105 (2013) 256–262.
  6. (WP5-T2) Tchalla, S. Belouettar, A. Makradi, H. Zahrouni, An ABAQUS toolbox for multiscale finite element computation, COMPOSITES, PART B: ENGINEERING, 52 (2013) 323–333.
  7. (WP5-T2) Cong, J. Yvonnet, H. Zahrouni, Simulation of instabilities in thin nanostructures by a perturbation approach, COMPUTATIONAL MECHANICS, 2013. DOI 10.1007/s00466-013-0927-7.

2012 WP1:

  1. (WP1-T2) Charpentier, D. Daloz, A. Hazotte, Interaction between phase transformation and compression sintering in a TiAl-based intermetallic alloy, KOVOVÉ MATER., 50 (2012) 301–307.
  2. (WP1 T2) Brunetti, A. Settefrati, A. Hazotte, S. Denis, J.J. Fundenberger, A. Tidu, E. Bouzy, Determination of gamma-gamma’ lattice misfit in a single-crystal nickel-based superalloy using convergent beam electron diffraction aided by finite element calculations, MICRON, 43 (2012) 396-406.

2012 WP2:

  1. (WP2 T3) B. Li, Y. D. Zhang, C. Esling, X. Zhao, L. Zuo, Evidence for a monoclinic incommensurate superstructure in modulated martensite, ACTA MATERIALIA, 60 (2012) 6982-6990.
  2. (WP2 T3) X. Zhang, Y. Zhang, M. Gong, Esling, X. Zhao, L. Zuo, Magnetic-field-induced microstructural features in a high carbon steel during odiffusional phase transformation, J. MAGN. MAGN. MAT. 324 (2012) 4184-4188.
  3. (WP2-T3) J. Bai, N. Xu, J-M Raulot, Y.D. Zhang, C. Esling, Zhao, L. Zuo, First-principles investigations of crystallographic, magnetic, and electronic structures in Ni2XIn (X = Mn, Fe, and Co), JOURNAL OF APPLIED PHYSICS, 112 (2012) 114901.
  4. (WP2-T4) F. Gu, L.S. Toth, Texture development and grain refinement in non-equal channel angular pressed Al, SCRIPTA MATERIALIA. 67 (2012) 33–36.
  5. (WP2-T4) M. Arzaghi, J. Fundenberger, L.S. Toth, R. Arruffat, L. Faure, B. Beausir, X. Sauvage,Microstructure, Texture and Mechanical Properties of Aluminum processed by High Pressure Tube Twisting, ACTA MATERIALIA, 60 (2012) 4393-4408.
  6. (WP2-T4) A. Fillon, X. Sauvage, Pougis, O. Bouaziz, D. Barbier, R. Arruffat, L.S. Toth, Influence of severe plastic deformation on the precipitation hardening of a FeSiTi steel, JOURNAL OF MATERIALS SCIENCE, 47 (2012) 7939-7945.
  7. (WP2-T4) K.M. Zhang, J.X. Zou, Grosdidier, C. Dong, Crater-formation-induced metastable structure in an AISI D2 steel treated with a pulsed electron beam, VACUUM, 86 (2012) 1273-1277.

2012 WP3:

  1. (WP3-T1) P. Bellot, B. Defay, J. Jourdan, P. Chapelle, A. Jardy, Inclusion behaviour during the electron beam button melting test, J. MAT. ENG. AND PERFORMANCE, 21 (2012) 2140-2146.
  2. (WP3-T1) G. Ghazal, Chapelle, A. Jardy, J. Jourdan, Y. Millet, Dissolution of high density inclusions in titanium alloys, ISIJ INT. 52 (2012) 1-9.
  3. (WP3-T1) V. De Felice, I.L.A. Daoud, B. Dussoubs, Jardy, J.P. Bellot, Numerical modelling of inclusion behaviour in a gas-stirred ladle, ISIJ INT. 52 (2012) 1273-1280.
  4. (WP3-T1, WP2-T1) Jardy, M. Revil-Baudard, H. Combeau, Influence of electromagnetic stirring on the macrosegregation in arc remelted Ti or Zr alloy ingots, J. IRON AND STEEL RESEARCH INT. 19 (2012) 199-202.

2012 WP4:

  1. (WP4-T1) F. Gu, L.S. Toth, Polycrystal modeling of tensile twinning in a Mg alloy during cyclic loading, SCRIPTA MATERIALIA. 67 (2012) 673-676.
  2. (WP4-T1) Zs. Kovacs, S. Toth, J. Lendvai, Ideal elasto-plastic behavior in torsional deformation of Zr44Ti11Cu10Ni10Be25 bulk metallic glass, JOURNAL OF ALLOYS AND COMPOUNDS, 542 (2012) 85–89.
  3. (WP4-T1) Pougis, L.S. Toth, O. Bouaziz, J-J. Fundenberger, D. Barbier, R. Arruffat, Stress and strain gradients in high-pressure tube twisting, SCRIPTA MATERIALIA. 66 (2012) 773-776.
  4. (WP4-T3) J. B. Le Graverend, L. Dirand, Jacques, J. Cormier, O. Ferry, T. Schenk, F. Gallerau, S. Kruch, J. Mendez, In situ measurement of the γ/γ′ lattice mismatch evolution of a nickel-based single crystal superalloy during non-isothermal very high temperature creep experiments, MET. TRANS. A43 (2012) 3946–3951.
  5. (WP4-T2) P.A Romero, G. Anciaux, Molinari, J.F. Molinari, Friction at the tool–chip interface during orthogonal nanometric machining, MODELLING SIMUL. MATER. SCI. ENG., 20 (2012) 055007.

2012 WP5:

  1. (WP5-T2) Elkhaldi, I. Charpentier, E-M. Daya, A gradient method for viscoelastic behaviour identification of damped sandwich structures, COMPTES RENDUS MÉCANIQUE, 340 (2012) 619-623.