Workshop


August 27-28, 2020,01:45 am, UFR MIM, Amphiteatre, Metz

Severe Plastic Deformation/Texture workshop

Thursday 27 August

  • 13:45 : Opening
  • 14:00 – 14:30 : SKROTZKI Werner (Germany-Dresden)
    « HPT-induced phase transformation in CrMnFeCoNi high-entropy alloy »
  • 14:30 – 15:00 : BORBELY Andras (France-Saint-Etienne)
    « In situ analysis of recrystallization texture formation by synchrotron X-ray diffraction »
  • 15:00 – 15:30 : MERTINGER Valeria (Hungary-Miskolc)
    « A novel approach to texture testing »
  • 15:30 – 16:00 : SINGH Satyaveer (UL-Australia-France-Labex DAMAS)
    « Texture evolution in asymmetric rolling »
  • 16:00 – 16:15 : Pause
  • 16:15 – 16:45 : TOTH Laszlo (UL-France-Labex DAMAS)
    « Is the origin of Stage-IV strain hardening is grain fragmentation by continuous dynamic recrystallization? »
  • 16:45 – 17:15 : ZHANG Chi (UL-China-France-Labex DAMAS)
    « Simulation of texture induced grain coarsening in FCC polycrystals during SPD by coupling the Taylor crystal plasticity model with a 3D topological aggregate »
  • 17:15 – 17:45 : KESTENS Leo (Belgium-Ghent)
    « Texture formation during SPD of metal alloys with cubic crystal structure »

Friday 28 August

  • 08:30 – 09:00 : MAUREL Pierre (UL-France-Labex DAMAS)
    « Surface severe plastic deformation of light alloys  (Ti-based and Al-based) »
  • 09:00 – 09:30 : DUREAU Clément (UL-France-Labex DAMAS-PPRIME)
    « Surface SPD and fatigue resistance of austenitic stainless steels »
  • 09:30 – 10:00 : DOQUET Véronique (France-Polytechnique)
    « Ultrafine versus coarse grained Al 5083 alloys: from low-cycle to very-high-cycle fatigue »
  • 10:00 – 10:30 : FRANOUX Chloé (UL-France-LEM3)
    « Dry friction experiments on Cu-Steel couple in representative contact conditions of SPD processes »
  • 10:30 – 10:45 : Pause
  • 10:45 – 11:15 : GROSDIDIER Thierry (UL-France-Labex DAMAS)
    « On the use of SPD for solid state H-storage »
  • 11:15 – 11:45 : PARIYAR Abhishek (UL-India-France-Labex DAMAS)
    « Production of polymer derived metal matrix composite by friction steer processing »
  • 12:00 – 14:00 : Common lunch
  • 14:00 – 17:00 : Thesis defense of VU Viet (UL-Vietnam-France-Labex-DAMAS)
    « New severe plastic deformation processes to obtain sheet products from bulk metals »
  • 17:00 : End of workshop

July 11, 2019, 08:45 am, IJL, Artem, room 2-012

During the visit of Prof. Wenzheng Zhang (Tsinghua University) at IJL, several presentations will be given by researchers from IJL and LEM3 to exchange with her.

  • 8h45 Welcome coffee
  • 9h-10h Wenzheng Zhang (Tsinghua Univ.)
    Irrational habit planes in fcc/bcc and hcp/bcc systems—structures and migration
  • 10h-11h Benoît Appolaire (IJL)
    Phase field modeling of microstructures in metallic alloys
  • 11h-12h00 Élisabeth Aeby-Gautier (IJL)
    Criteria for fast and selective precipitation at grain boundaries in Ti-alloys: consequences for in service microstructures
  • 14h00-15h00 Yudong Zhang (LEM3)
    Displacive feature of beta to alpha phase transformation and its impact on alpha variant selection in metastable Ti alloy
  • 15h00-16h00 Lucile Dezerald (IJL)
    Ab initio investigation of plastic anisotropy in BCC metals
  • 16h00-16h30 Steve Gaudez (IJL)
    Iron and alloyed carbides investigation during the tempering of martensite and nano-bainite low alloyed steel
  • 16h30-17h00 Morgan Goetz (IJL)
    Decomposition of the phase at intermediate temperature in -metastable Ti-5553 alloy

March 6, 2019, 08:00 am, LEM3 Technopôle, DN1-005: meeting room 1st Floor

Workshop LabEx DAMAS :

WP1 ‘Material Innovation’ – WP2 ‘Microstructure Design’

Invited Lecturer: Dr. Quaranta Lorenzo, Sandvik Material Technology, Sweden

‘Latest Development in Steels for lightening applications’

——————————————————
Nathalie GEY
Chargée de Recherche CNRS – Département IMPACT
Laboratoire d’Etude des Microstructures et de Mécanique des Matériaux
UMR n°7239 CNRS / Université de Lorraine  –  www.lem3.fr
LEM3 CNRS Université de Lorraine
7 rue Félix Savart
57070 Metz

March 1, 2019, 02:30 pm, IJL ARTEM Nancy, salle 3-012

Chers collègues,

J’ai le plaisir de vous convier (ainsi que tout autre membre du LabEx intéressé, n’hésitez pas à passer l’information autour de vous) à la demi-journée “Bilan et projets” du Work Package 3 (Process Design) du Laboratoire d’Excellence DAMAS.

Ci-dessous un bref ordre du jour :

14.30 bilan 2018 de la tâche 3.1 (J.P.  Bellot et collègues)
15.00 bilan 2018 de la tâche 3.2 (F. Patisson et collègues)
15.30 bilan 2018 de la tâche 3.3 (P. Laheurte et collègues)
16.00 Pause
16.15 demandes du WP pour la 8ème tranche / classement des demandes en vue de la réunion du CS du LabEx

Très cordialement,

Alain

Alain JARDY
Directeur de Recherches CNRS
Responsable de l’Equipe “Procédés d’Elaboration”
Institut Jean Lamour – Département SI2M / Laboratoire d’Excellence DAMAS
Campus ARTEM, 2 allée André Guinier, BP 50840, 54011 Nancy Cedex
Tel : +33.(0)3.72.74.27.20
Mél : alain.jardy@univ-lorraine.fr

February 27, 2019, 09:00 am, LEM3 Technopôle DN1-005: meeting room 1st Floor

Workshop WP4-WP5 Labex DAMAS

Mechanical properties and structures of advanced metal alloys

and multiscale simulations

Lectures in English

The lectures are for 30 minutes total, including discussion.

 

 

Workshop: “Les microscopies électroniques à Metz et à Nancy”

March 22,  LEM3 Technopole, Metz, 9:00 AM > 04:30 PM

« Les microscopistes (électroniques) messins et nancéens se sont rencontrés ce jeudi 22 Mars au LEM3 à Metz.
Chacun(e) a expliqué les techniques qu’il utilise et/ou qu’il développe.
Les échanges ont été animés et fructueux.
Il s’est avéré que la plateforme de microscopie du LEM3 (Metz) et celle de l’IJL (Metz) étaient vraiment complémentaires.
Aussi a-t’il été décidé d’intensifier les collaborations entre les deux services de microscopie.
En attendant la prochaine rencontre à Nancy… »

Les différentes présentations sont disponibles sur la page dédiée au programme.

 

Séminaire organisé dans le cadre du
LabEx DAMAS

 

par Emmanuel BOUZY et Jaafar GHANBAJA

 

Les techniques de microscopies électroniques qui sont développées et mises en œuvre à Metz et à Nancy sont très différentes et vraiment complémentaires.
Le but de cette journée est de les faire connaître aux microscopistes messins et nancéens.

Worshop: “5ième journée Methode Asymptotique Numérique”

November 27, LEM3 Technopole, Metz

La Méthode Asymptotique Numérique (MAN) est une technique de continuation basée sur les séries de Taylor. Elle a trouvé beaucoup d’applications dans le domaine des vibrations, linéaires ou amorties ou non, ainsi que pour les problèmes d’instabilités en mécanique des solides et des fluides.
Largement développée à Metz et dans des groupes issus de Metz, divers pays, notamment au Maghreb, en Chine et même dans les pays anglosaxons.

Cette journée, organisée tous les 2 ou 3 ans (précédentes journées à Metz 2006, Marseille 2009, Marne-la Vallée 2012, Lorient 2014), permet de faire le point sur les avancées méthodologiques et les nouveaux champs d’applications.

Contact: Michel Potier-Ferry (michel.potier@univ-lorraine.fr)

Workshop: “Optimisation, par déformation plastique sévère,  de matériaux métalliques pour le stockage solide de l’hydrogène”

August 18, LEM3 Saulcy, room Klepaczko

10h30 : Effets des déformations mécaniques sur les propriétés d’absorption d’hydrogène des hydrures métalliques

Professeur Jacques HUOT, Département de Chimie, Biochimie et Physique, Institut de Recherche sur l’Hydrogène, Université du Québec à Trois-Rivières, 3351 des Forges, Trois-Rivières, G9A 5H7, Canada

Abstract

11h15 : Mg based hydrogen storage nano composites synthesized through arc plasma method and post treatments

Professeur Jianxin ZOU , National Engineering Research Center of Light Alloy Net Forming & State Key Laboratory of Metal Matrix Composite, Shanghai Jiao Tong University, Shanghai 200240, P. R. China

Abstract

 

International workshop “Metallurgy with Synchrotrons”

March 7-8, Institut Jean Lamour, Nancy

Free registration required before March 1, 2016

Tentative programme (list of confirmed lecturers, updated regularly)

MONDAY 7TH MARCH 2016

14:00 Welcome and introduction
Harald REICHERT, ESRF, France
David JARVIS, ESA, The Netherlands

Liquid Metal
Dirk HOLLAND-MORITZ, Institut für Materialphysik im Weltraum, Germany

Solidification
Peter LEE, University of Manchester, UK
Luc SALVO, SIMAP, France
Miha ZALOZNIK, Institut Jean Lamour, France

TUESDAY 8TH MARCH 2016

09:00 Welcome
Phase transformation
Sophie BERVEILLER, LEM3, France
Moukrane DEHMAS, Institut Jean Lamour, Nancy
Thomas SOURMAIL, AscoMétal, France

Mechanical properties
Petr ŠITTNER, Institute of Physics of the Czech Academy of Sciences, Prague
Pierre-Olivier RENAULT, Pprime, France
Alain. JACQUES, Institut Jean Lamour, France
Eric MAIRE, Mateis, France
Jean-Christophe HELL, Arcelor Mittal, France

Welding / additive manufacturing
Wajira MIRIHANAGE, University of Manchester, UK

15:30-17:00 Round table: future for Metallurgy and synchrotrons

Website: http://ijl.univ-lorraine.fr/actualites/les-actualites-par-themes/details-categories/7-8-march-2016-international-workshop-metallurgy-with-synchrotrons/

What can we learn from diffraction on polycrystal behavior?”

November 18, 2015, Metz, LEM3 Room Kelpaczko

The topic includes X-ray, Synchrotron, Neutron, EBSD, and TKD measurement techniques, applied to polycrystals.

Program:

9:30 Reception of participants Workshop Introduction

Session 1: Review lectures (Chairman: Alain Jacques)

10:00 Tamas Ungar (Hungary): Grain-to-grain polycrystal measurements by synchrotron and neutron  

10:30 Werner Skrotzki (Germany): Different ways of measuring texture gradients by diffraction  

11:00 Coffee break

 

Session 2: Application of EBSD on material behavior (Chairman: Stéphane Berbenni)

11:30 Laszlo Toth (France): EBSD based GND densities in severe plastic deformed metals  

12:00 Francis Wagner (France): Deformation heterogeneity analysis by EBSD in polycrystals  

12:30 Lunch together at CROUS, in private space, for lecturers and chair persons

 

Session 3: Innovative experimental techniques and their modeling (Chairwoman: Yudong Zhang)

14:00 Gyula Zilahi (Hungary): Twin identification in synchrotron polycrystal measurements  

14:30 Emmanuel Bouzy (France): Transmission Kikuchi Diffraction (TKD) applied to polycrystals  

15:00 Alain Jacques (France): From modeling of plasticity to diffraction peaks simulations  

15:30 Coffee break

 

Session 4: Novel ways of extraction of experimental data from diffraction (Chairman: Yan Beygelzimer)

16:00 Gabor Ribarik (Hungary): Evaluation of diffraction patterns for microstructural parameters using a Monte-Carlo algorithm  

16:30 Fundenberger-Beausir (France): Presentation of the new JTEX and ATOM softwares  

17:00 Round table discussion

18:00 End

IMG_0975

November 18, 2015, Metz, LEM3 Room Kelpaczko


 

2nd Workshop « 3D Microtexture analysis »

October 13-15, 2015, Metz

LEM3 « Laboratoire d’Etudes des Microstructures et de Mécanique des Matériaux » – Université de Lorraine – CNRS will host the 2nd workshop on 3D Microtextures in collaboration with the Air Force Research Laboratory (AFRL), BlueQuartz Software and the Materials Science & Engineering Dept. at Carnegie Mellon University.

The workshop is intended to provide researchers at all levels with tools and methods for reconstructing, analyzing and synthesizing 3D microstructures. A particular focus of the methods is on the use of crystallographic orientation (texture), whether for reconstructing a 3D volume from EBSD serial sections, or for generating representative microstructures with orientations assigned for each grain. This 2nd session includes invited lectures on relevant topics and hands-on exercises on provided computers to explore the novelties offered by the last version of Dream3D* (Version 6**).

First workshop on “Tailored Materials Interfaces”

from 29 June, 1 p.m. until 30 June, 5:00 pm. at Saarbrücken Campus, Saarland University, in building A3 3, “Aula”.

Participation at the workshop is free.

If you wish to attend the workshop, please send an e-mail to Ms. Christine Hartmann (Christine.Hartmann@leibniz-inm.de), registration deadline has been extended to 19 June 2015.

If you wish to submit a poster, please send a title with your registration.

We are inviting you to a get-together event for dinner on 29 June in the Stiefel Brewery; please let us know with your registration whether you wish to participate.

Please find program, the campus map indicating Aula and parking, and a hotel list .

 

We look forward to welcoming you in Saarbrücken!

Workshop WP2 on joining
November 27, 2013 2:00 PM in room Klepazsko, building C, LEM3, Metz.

Le but de cette manifestation est de réunir les chercheurs académiques et industriels afin de favoriser des échanges informels, et de présenter les problématiques, les moyens et les dernières avancées sur des problèmes liés à la solidification, aux changements microstructuraux, création de contraintes résiduelles et leurs effets sur les propriétés.
Tous les participants au LabEx, plus largement tous les membres des deux laboratoires intéressés sont cordialement invités à y assister.

Le programme des présentations est le suivant :

  • Fabrice Scandella, Institut de Soudure, Yutz : « Problématiques industrielles dans le domaine de l’assemblage et apport des nouvelles technologies de soudage »
  • Thomas Dupuy, ArcelorMittal, Maizière-les-Metz : « le soudage hétérogène acier/acier dans l’automobile : faux problème ou vraies difficultés ? »
  • Ludovic KOUNDE, IREPA-Laser, Illkirch : simulation du soudage et du CLAD « Construction Laser Additive Directe »
  • Thierry Mazet, Fives Cryo, Golbey
  • Julien Zollinger, IJL Nancy, « Formation des microstructures lors du soudage de matériaux métalliques hétérogènes »
  • Eric Fleury, LEM3 Metz, Propriétés à hautes températures d’assemblage hétérogène d’aciers inoxydables martensitiques et austénitiques soudés par TIG

Julien Zollinger (IJL) : julien.zollinger@univ-lorraine.fr
Eric Fleury (LEM3) : eric.fleury@univ-lorraine.fr

 WORKSHOP WP4 WP5 on twinning

Twinning

September 4, 13:30-17:30 AM – Room Klepaczko, LEM3 Saulcy, building C, Metz

Workshop: « Hétérogénéités de la solidification aux propriétés finales »

  • Effet de la solidification sur les hétégénéités de structure et de composition – Où en sont les modèles ? H. Combeau
  • Microségrégation et macroségrégation dans les aciers à très haute résistance : formation de la structure en bandes et conséquences : E. Ahtoy & M. Bobadilla.
  • Ségrégations et anisotropies structurales : exemple des aciers et des alliages d’aluminium : A. Hazotte
  • Alliages de titane : transformations de phases à l’état solide : J. Teixeira
  • Macrozones texturées dans les alliages de titane : L. Germain
  • Discussion

DREAM.3D – June 13-14, 2013 – METZ – FRANCE

Labex DAMAS supported:

CROSSBEAM MICROSCOPY June 12, 2013

EUROPEAN Workshop: Methods for 3D Microstructural Studies June 13-14, 2013